1998 Honda CR-V Bodies and Fender Parts
More 1998 Honda CR-V Bodies and Fender Parts
Find your specific 1998 Honda CR-V original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1998 Honda CR-V Bodies and Fender Parts
KYB – Shock Bellows Bump Stop Kit (Part No.L4030108063KYB)
from
$33.86
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
Sachs – Strut Bump Stop (Part No.L3036238476SAC)
from
$36.23
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.
Product Features:
See More
Product Features:
- SACHS Service Kits help to prolong the life and performance of the shock or strut.
- Always replace your Service kits in pairs.
- Are built with design and quality that matches or exceeds OE quality
WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.110083)
from
$146.99
Laser Measured MudFlaps are custom fit and protect your vehicle fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle wheels. No drilling required and installs in Minutes.
Product Features:
See More
Product Features:
- Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
- MudFlap Will Offers Undeniable Vehicle Protection
- Features The Patented QuickTurn Hardened Stainless Steel Fastening System
- Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
- Laser Measured For A Perfect Fit Set Literally Mounts-In-Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
- Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface
KAI – Mud Flap (Part No.HO1294102)
from
$9.99
New Standard Replacement Driver Side Front Mud Guard
Product Features:
See More
Product Features:
- Front, Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.HO1249116)
from
$14.99
New Standard Replacement Passenger Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.HO1249105)
from
$13.99
New Standard Replacement Passenger Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.HO1248155)
from
$45.99
New Standard Replacement Driver Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Polyethylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Le Bra – Front End Cover, Vinyl, Black (Part No.551157-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!Leather grain vinyl
See More
Le Bra – Front End Cover (Part No.55856-01)
from
$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Covercraft – Custom Hood Protector (Part No.45407-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
TrailFX – Running Board Mounting Kit, Use with TFX Running Boards, Rocker Panel Mount (Part No.R0008MK)
from
$129.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Designed Use With TrailFX SUV Running Boards
- Available For The Most Popular SUV Or CUV On The Market
- Limited 3 Year Warranty
Westin – Sure-Grip Running Boards (Part No.27-6610)
from
$426.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
TrailFX – Aluminum, Unlighted, 65"L, 200Lb, With Tall Rubber Strip/Ss Trim (Part No.R0001RB)
from
$409.99
Whether you are looking for additional traction or easier vehicle entry, TrailFX Running Boards feature a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials and style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.
Product Features:
See More
Product Features:
- Heavy Duty, Extruded Aluminum And Polished, Marine-Grade Stainless Steel Outer Trim Ensure Maximum Strength And Durability
- 3.5 Inch Wide, UV-Resistant Step Creates A Secure, Non-Slip Surface For Entering And Exiting The Vehicle
- Seamless, Welded Ends Add A Clean, Finished Look
- Track Mounting System Allows For Multiple Mounting Positions To Clear Mud Flaps
- Provides Moderate Protection Against Road Hazards And Debris
- Installation Is Simple Using Required Mounting Brackets
KAI – Wheel Arch Trim (Part No.HO1790101)
from
$47.99
New Standard Replacement Rear Driver Side Wheel Opening Molding, Made Of Aluminum
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Front Passenger Side Wheel Arch Trim, Made Of Plastic (Part No.HO1291105)
from
$29.99
New, Standard Replacement Passenger Side Front Wheel Opening Molding, Fine Textured Finish
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
KAI – Front Driver Side Wheel Arch Trim, Made Of Plastic (Part No.HO1290103)
from
$32.99
New, Standard Replacement Front Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
Dorman – Weather Strip Retainer – 6 mm Hole, 8 mm Stem, 5×15 mm Head (Part No.963-098D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Honda Splash Shield Retainer (Part No.961-037D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
MTC – Molding Clip (Part No.O5030424398MTC)
from
$3.44
Molding Clip
KAI – Fender Splash Shield (Part No.HO1251110)
from
$49.99
New Standard Replacement Passenger Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Honda Bumper Retainer (Part No.963-500D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Engine Splash Shield Pin Kit (Part No.926-389)
from
$16.99
Engine shield dragging because of broken or missing retainers? This engine splash shield hardware is an exact match to replace original equipment hardware. Made of quality materials, this hardware has been tested for precise fit!
Product Features:
See More
Product Features:
- Ideal replacement – this splash shield hardware is a direct replacement for original equipment retainers.
- Durable construction – made of quality materials for reliable service.
- Cost-effective solution – offers original equipment quality at competitive price
- Multiple uses – this hardware is suitable for a variety of automotive and commercial uses
Dorman – Bumper Retainer-Exterior-Acura/Honda (Sold by each) (Part No.700-627)
from
$0.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
KAI – Fender Splash Shield (Part No.HO1250110)
from
$49.99
New Standard Replacement Driver Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1998 Honda CR-V Bodies and Fender Parts Categories
1998 Honda CR-V Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1998 Honda CR-V. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 16 different Bodies and Fender Parts in our inventory ranging from $0.79 to $159.99. That means you can find the exact parts or products you need to keep that 1998 Honda CR-V running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Honda CR-V. Dorman, Dee Zee, and Auto Ventshade (AVS) are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1998 Honda CR-V, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1998 Honda CR-V rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1998 Honda CR-V Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Honda CR-V demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your CR-V the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Auto Ventshade (AVS) Bodies and Fender Parts
We carry Auto Ventshade (AVS) parts in our stock across Running Boards and Steps categories, plus more. For a 1998 Honda CR-V, our most popular Auto Ventshade (AVS) Bodies and Fender Parts include:
from
$59.99
(3)
Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc
Running Boards and Steps
Top 1998 Honda CR-V Bodies and Fender Parts from Dorman
Dorman products are another trusted brand when it comes to Bodies and Fender Parts for your 1998 Honda CR-V. Popular Dorman parts include:
FAQs for 1998 Honda CR-V Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1998 Honda CR-V?
Out of 16 Bodies and Fender Parts for the 1998 Honda CR-V, the most popular in our inventory are:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
from
$48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
