1998 GMC Savana 3500 Differentials

Essential 1998 GMC Savana 3500 Differentials

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-387-AS)

Tapered Cone Wheel Bearing Assembly

from

$16.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Motive Gear – Pinion Seal (Part No.26064030)

Pinion Seal

from

$23.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Pinion Install Kit For Dana 70-HD & Super-70 Differential (Part No.13034)

Pinion Install Kit For Dana 70-HD & Super-70 Differential

from

$324.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70HD
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck (Part No.55067)

Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck

from

$121.99
Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.

Product Features:
  • Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck
See More

SKF – Wheel Bearing (Part No.K8000205983SKF)

Wheel Bearing

from

$60.23
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Pro-King – Differential Ring Gear Bolt (Part No.741B935)

Differential Ring Gear Bolt

from

$2.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R70HR)

Differential Bearing Kit - Koyo

from

$169.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL DANA 70 HD
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 9.5" In A 4.56 Ratio (Part No.36226)

Ring & Pinion Gear Set For GM 9.5" In A 4.56 Ratio

from

$344.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 9.5″
  • 9.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-529)

Differential Pinion Yoke Assembly

from

$203.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8" (Part No.21717)

4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8"

from

$429.99
Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.

Product Features:
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • 4340 Chromoly
  • 30 spline
  • Cut to length design fits 34.8″-38.8″ applications
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Replacement Inner Slinger For Dana 60

from

$9.99
Product Features:
  • Inner oil slinger for Dana Spicer 60
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Grizzly Locker For GM 10.5" 14 Bolt Truck With 30 Spline Axles (Part No.28015)

Grizzly Locker For GM 10.5" 14 Bolt Truck With 30 Spline Axles

from

$859.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Installs into standard open carrier
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Steel Cover For Dana 70 (Part No.32322)

Steel Cover For Dana 70

from

$149.99
Product Features:
  • Fits Dana Spicer 70
  • Steel
See More

Yukon Gear – Standard Open Side Gear And Thrust Washer For 9.5" GM (Part No.33303)

Standard Open Side Gear And Thrust Washer For 9.5" GM

from

$8.99
Standard open side gear thrust washer for 9.5″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 9.5″
See More

Yukon Gear – Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck (Part No.16113)

Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck

from

$78.99
Eaton positraction shim kit for GM 14T.

Product Features:
  • Shim kit
  • Fits GM 10.5″ 14 bolt truck Eaton positraction
See More

Felpro – Differential Cover Gasket (Part No.RDS 55063)

Differential Cover Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)

    Differential Gear Install Kit

    from

    $79.99


    Product Features:
    • MINI INSTALL KIT-GM9.5/CHRY9.25 FRT
    See More

    Yukon Gear – Bearing Race Driver (Part No.56019)

    Bearing Race Driver

    from

    $219.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits LM104911 race
    • All steel construction
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    National – Bearings (Part No.HM903249)

    Bearings

    from

    $48.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    1998 GMC Savana 3500 Differentials

    Maybe you’re in the middle of a full rebuild of that 1998 GMC Savana 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 195 different Differentials in our inventory ranging from $1.89 to $2,324.99. That means you can find the exact parts or products you need to keep that 1998 GMC Savana 3500 running smoothly.

    Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 1998 GMC Savana 3500. Valvoline, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1998 GMC Savana 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,296 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Multi Purpose Seal with 4.2 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1998 GMC Savana 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1998 GMC Savana 3500 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 GMC Savana 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Savana 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Top 1998 GMC Savana 3500 Differentials from Dorman

    Dorman products are another trusted brand when it comes to Differentials for your 1998 GMC Savana 3500. Popular Dorman parts include:
    Ring and Pinion Bearing Installation Kit
    from $282.99
    (255)
    Ring and Pinion Bearing Installation Kit
    Differential Bearing Kits
    Rear Differential Cover
    from $36.99
    (15)
    Rear Differential Cover
    Differential Covers

    FAQs for 1998 GMC Savana 3500 Differentials

    What are the most purchased Differentials for the 1998 GMC Savana 3500?

    Out of 195 Differentials for the 1998 GMC Savana 3500, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    Differential Cover Gasket
    from $6.79
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil

    What are the top-rated 1998 GMC Savana 3500 Differentials?

    Top-rated Differentials for your 1998 GMC Savana 3500 based on customer reviews/ratings are:
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”
    Multi Purpose Seal
    from $44.99
    (5)
    Multi Purpose Seal
    “How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”
    Cylindrical Bearing
    from $31.99
    (4)
    Cylindrical Bearing
    “excellent product”