1998 Dodge B2500 Differential Cross Pins
Enhance and Protect Your 1998 Dodge B2500 with Quality Differential Cross Pins
Maintaining the performance of your 1998 Dodge B2500 starts with choosing the right parts, and high-quality Differential Cross Pins help ensure a reliable and efficient vehicle. At Advance Auto Parts, we offer Differential Cross Pins specifically for the 1998 Dodge B2500, ensuring a perfect fit and lasting durability. Choosing to shop with Advance Auto Parts means you’re making a smart decision to prioritize both quality and reliability for your vehicle.
Affordable and Reliable Differential Cross Pins for Every Budget
Finding affordable, quality Differential Cross Pins is easy at Advance Auto Parts. With prices starting as low as $26.99 and an average price of $64.28, you can choose one that fits your budget while delivering the quality you expect. Our Differential Cross Pins are competitively priced, ranging from $26.99 to $156.99, so you get value without compromising on strength or reliability.
Explore Related Parts for a Complete Solution
To further enhance your 1998 Dodge B2500, don’t miss our related parts categories, including Differential Oil and Rear Differential Cover Gaskets. These additions will round out your repair or upgrade project and ensure your vehicle is ready for any adventure.
Differential Cross Pins for Your 1998 Dodge B2500
Yukon Gear – Cross Pin Shaft for Standard Open Chrysler 9.25" (Part No.33311)
from
$46.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for Chrysler 9.25″
- Fits standard open differentials only
- 0.860″ diameter
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Power Lok positraction only
Yukon Gear – 9.25" Cross Pin Shaft Tracloc Only, Not Standard Open 0.870" Diameter (Part No.33310)
from
$57.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for Chrysler 9.25″
- Fits Trac Loc positraction only
- 0.870″ diameter
USA Standard Gear – Differential Cross Pin (Part No.17035)
from
$49.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Chrylser 8.25″ with 27 and 29 spline axles
- Works with Spartan Locker or standard open spider gears
Yukon Gear – Cross Pin Shaft for 8.25" Chrysler (Part No.33308)
from
$57.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft for Chrysler 8.25″
- Fits standard open differentials only
USA Standard Gear – Differential Cross Pin (Part No.17019)
from
$52.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. .
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 60
- Works with Spartan Locker or standard open spider gears
Yukon Gear – Replacement Cross Pin Shaft for Dana 60, Fits Standard Open and Trac Loc Posi (Part No.33314)
from
$26.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60
FAQs for 1998 Dodge B2500 Differential Cross Pins
Which Differential Cross Pins are the top sellers for the 1998 Dodge B2500?
Out of 7 Differential Cross Pins that fit 1998 Dodge B2500s, the following parts are the top sellers:
from
$156.99
This product is not rated
Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)
Differential Cross Pins
from
$57.99
This product is not rated
9.25" Cross Pin Shaft Tracloc Only, Not Standard Open 0.870" Diameter
Differential Cross Pins
How can I make sure that a part will be compatible with my 1998 Dodge B2500?
Our Dodge B2500 aftermarket and OEM parts are designed specifically for the 1998 model. You can always find your specific fitment and compatibility for your 1998 Dodge on an individual product page.
What is the price range for 1998 Dodge B2500 Differential Cross Pins?
The range of prices of Differential Cross Pins for the 1998 Dodge B2500 goes from $26.99 up to $156.99 for the most premium parts.
What is the average price of 1998 Dodge B2500 Differential Cross Pins?
1998 Dodge B2500 Differential Cross Pins average $64.28 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Differential Cross Pins for other Dodge B2500 model years?
Can I get help with 1998 Dodge B2500 Differential Cross Pins orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Differential Cross Pins and more.
What is your return policy for Dodge B2500 Differential Cross Pins?
Advance Auto Parts keeps returns simple. For new Dodge B2500 Differential Cross Pins and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Differential Cross Pins For Other Dodge B2500 Model Years
Looking for parts for a different model year of the Dodge B2500? Below, you’ll find links to Differential Cross Pins for a range of model years, from 1995 models all the way up to 1997. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 1995, 1996, 1997, and more, ensuring you have access to the best options for your specific needs. Choosing a Differential Cross Pins from Advance Auto Parts means investing in top-tier parts that will keep your Dodge B2500 running at its best, no matter the year.
