1998 Chevrolet S10 Differentials

Find your specific 1998 Chevrolet S10 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1998 Chevrolet S10 Differentials

from

$203.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 1982-1999 GM 7.5″ and 7.625″
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$12.52

Differential Drain P

from

$19.09

Differential Cover G

from

$209.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 1982-1999 GM 7.5″ and 7.625″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$153.99

Product Features:

Positraction spring kit
Fits GM 7.5″ and 7.625″ Dura Grip
Includes preload plates

from

$15.29

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel
High level bonding adhesive is used for durability
Elastomer compounds do not utilize any reground rubber fillers

from

$172.99

USA Standard axle for ’88-’97 S10 rear. This axle has 28 splines and measures 29″ long.

Product Features:

Fits 1988-1997 GM 7.5″ and 7.625″ in S10 with 4 wheel drive
28 spline
29″ long
5 lug

from

$224.99

Product Features:

GM 10BL 7.5&7.625 R/P 3.42 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M86610 race
All steel construction

from

$124.99

MiniSpool

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$6.99

Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:

Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
7/16″ x 20

from

$65.99

Product Features:

GM 8.5 LATE INSTALL KIT 99-UP

from

$28.99

7.2″ shifter seal.Yukon Mighty seal.

Product Features:

Shifter seal
Fits GM 7.2″ IFS

from

$27.49

SHAFT SEAL

from

$239.99

8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.

Product Features:

Standard open carrier case
Fits GM 8.5″ with 28 or 30 spline axles
2.73 and up ratio only
Does not include spider gears

from

$109.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
Includes carrier bearings and races and “super” carrier shim kit

from

$10.99

8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:

Pinion gear thrust washer for GM 8.5″ and 8.6″
Fits standard open differentials only
0.795″ I.D.

from

$59.99

Product Features:

Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
Interlocking design makes installation much easier

from

$7.99

Differential Cover B

from

$157.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

BEARING GASKET & SEAL KIT, 10 BOLT GM ’99 AND UP MASTER KIT

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$231.99

This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.

Product Features:

GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008

from

$829.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM 7.625″ with 28 spline axles
3.23 ratio and up only
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$191.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$223.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$32.99

Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:

Side adjuster lock bolt
Fits GM 7.2″ IFS and 9.25″ IFS

Popular 1998 Chevrolet S10 Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Lock Springs

Differential Carrier Bushings

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Pinion Shafts

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Differential Bearing Adjuster Nut Lock Bolts

Differential Shifter Seals

Maybe you’re in the middle of a full rebuild of that 1998 Chevrolet S10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 329 different Differentials in our inventory ranging from $1.99 to $1,839.99. That means you can find the exact parts or products you need to keep that 1998 Chevrolet S10 running smoothly.

Differentials are only as good as their brand. We stock 23 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Chevrolet S10. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1998 Chevrolet S10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,102 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 4.9 stars and Rear Differential Cover with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 1998 Chevrolet S10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1998 Chevrolet S10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Chevrolet S10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your S10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Royal Purple Differentials

We carry Royal Purple parts in our stock across Differential Oil categories, plus more. For a 1998 Chevrolet S10, our most popular Royal Purple Differentials include:

from $12.99

(82)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

Differential Oil

Top 1998 Chevrolet S10 Differentials from Valvoline

Valvoline products are another trusted brand when it comes to Differentials for your 1998 Chevrolet S10. Popular Valvoline parts include:

from $32.99

(235)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

Differential Oil

from $14.99

(36)

Transfer Case Fluid, 1 Quart

Differential Oil

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

FAQs for 1998 Chevrolet S10 Differentials

What are the most purchased Differentials for the 1998 Chevrolet S10?

Out of 329 Differentials for the 1998 Chevrolet S10, the most popular in our inventory are:

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

from $9.99

(195)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $10.79

(33)

Taper Bearing Set

Differential Bearings

What are the top-rated 1998 Chevrolet S10 Differentials?

Top-rated Differentials for your 1998 Chevrolet S10 based on customer reviews/ratings are:

from $7.99

(45)

DIFFERENTIAL GASKET

“Some say no need for a gasket and to use gasket sealer only its just as good. I like to make sure that the cover is installed properly to avoid any l”

from $20.99

(38)

Rear Differential Cover

“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”

from $32.99

(14)

Rear Differential Cover

“Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”

1998 Chevrolet S10 Differentials

More 1998 Chevrolet S10 Differentials

Essential 1998 Chevrolet S10 Differentials

Yukon Gear – Pinion Install Kit For GM 7.5" Differential (Part No.13064)

MTC – Differential Drain P (Part No.J7065587755MTC)

Mahle – Differential Cover G (Part No.J7018826576MAH)

USA Standard Gear – Master Overhaul Kit for the ’82-’99 GM 7.5" and 7.625" Differential (Part No.37049)

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

MOOG – Differential Carrier Bushing (Part No.K6572)

USA Standard Gear – Axle For ’88-’97 S10 Rear – This Axle Has 28 Splines And Measures 29" Long (Part No.35056)

Motive Gear – Differential Ring and Pinion (Part No.GM7.5-342)

Yukon Gear – Bearing Race Driver (Part No.56022)

Richmond Gear – MiniSpool (Part No.78-7526-1)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Yukon Gear – Ring Gear Bolt (Part No.33049)

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IKL)

Yukon Gear – 7.2" Shifter Seal (Part No.30280)

FAG US – SHAFT SEAL (Part No.SS2588)

Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Yukon Gear – Differential Cover B (Part No.33572)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RLMK)

Motive Gear – Pinion Nut (Part No.1260823)

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)

Yukon Gear – Dura Grip Positraction For GM 7.625" With 28 Spline Axles, 3.23 & Up (Part No.26018)

Pro-King – Differential Internal Nest Kit (Part No.742G717B)

Pro-King – Differential Internal Nest Kit (Part No.741B717)

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Popular 1998 Chevrolet S10 Differentials Categories