1998 Chevrolet Monte Carlo Performance and Racing Products

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

• Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
• Controls Engines Air/Fuel Ratio
• Controls Spark Advance For Max Power
• Potential Gas Mileage Improvements
• No Wiring Or Soldering Required
• Installs In Less Than 30 Minutes
• Product might not be available in all states due to local laws.

Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:

• Designed For Daily Street Driving
• For Unmodified Vehicles w/Stock Thermostat
• Controls Engines Air/Fuel Ratio
• Controls Spark Advance For Max Power
• Potential Gas Mileage Improvements
• No Wiring Or Soldering Required
• Installs In Less Than 30 Minutes

Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:

• Designed For Daily Street Driving
• For Unmodified Vehicles w/Stock Thermostat
• Controls Engines Air/Fuel Ratio
• Controls Spark Advance For Max Power
• Potential Gas Mileage Improvements
• No Wiring Or Soldering Required
• Installs In Less Than 30 Minutes
• Product might not be available in all states due to local laws.

This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.

Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use.

Product Features:

• High performance and high air flow filter
• Filter media is non-woven synthetic and pre-dyed
• Replaces stock air filter
• Easy to install with no special tools or skills required
• Reinforced with a steel mesh

304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.

Product Features:

• Multi-Layer Construction
• Most Durable Filters In The Industry
• Outperforms The Others In Clean Air Testing
• Assures Cleanest Air Possible From Washable Filter
• Washable And Reusable
• Made In The USA
• Lifetime No Hassle Warranty

Product Features:

• Designed For Carbureted V8s
• Power Increases From 100-250 HP
• Precision EDM Machined Spray Bars
• Simple To Install

Product Features:

• Best Way To Get A Major Power Increase
• Power Increases From 50-70 HP
• Work With Stock ECU
• Simple Installation

Excellent resilience. High temperature endurance. Will not creep or cold-flow. Will not get brittle. Resists corrosion. Eliminates gasket sealer. Compatible with high octane and exotic fuel.

Product Features:

• Excellent resilience
• High temperature endurance
• Will not creep/cold-flow
• Will not get brittle
• Resists corrosion
• Eliminates gasket sealer
• Compatible w/high octane fuel
• Compatible with exotic fuel

With the ever-increasing technology in performance and racing engines, supercharged, turbo charged, nitrous-oxide and extreme compression ratios, a demand was created for stronger, more durable engine gaskets. Mr. Gasket, the originator of high performance gaskets, has met the challenge and developed performance gaskets in a variety of materials for all applications to meet the sealing demands of these engines. Mr. Gasket engine gaskets are the most advanced, tested and proven in the performance market today and earned the respect of many professional and sportsman racers.

Product Features:

• Steel shimmed for perfect sealing
• Increases engine compression
• High temp silicone coated to prevent leaks
• Stress formed embossments

Product Features:

• Provides excellent sealing and conformability
• Releases+N747 clean without sticking, if the engine needs to be disassembled
• Perfect companion for Edelbrock cylinder heads and intake manifolds
• Does not include end seals
• Use of a silicone sealant in place of end seal is recommended

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).

Product Features:

• 10-15% More Energy
• Direct Plug In Replacement Direct OE Fit
• Advanced Bobbin Technology
• Highly Specialized Silicone Magnetic Steel Cores
• Standard Motor Products SMP Dr-32

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

• Improved output coil for electronic ignitions
• Works w/Blaster Ignition Or MSD 5/6/7 Series
• Ballast Resistor Required If Used w/Stock Points Ignition
• Alkyd tower w/high dielectric properties lessens carbon tracking

ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.

Product Features:

• 42000 Volts
• Effective To 6500 RPM
• Quicker Starting
• Improved Throttle Response
• Higher RPM Power
• Can Finished In Yellow

Hypertech is a technology-driven company with a unique status in the aftermarket industry. Unlike other speed equipment manufacturers that produce hard parts like camshafts and cylinder heads, our core product is knowledge the ability to tune the complex computers that control essential functions in modern automobiles. We have invested in people, not machinery. The knowledge and skill of the Hypertech team are our most valuable assets. Our staff of engineers and technicians has degrees in a variety of disciplines, including electrical engineering, computer science, and mechanical engineering. Hypertech people know computers from the inside out! The Hypertech team is passionate about performance. We have racers, hot rodders, and performance enthusiasts on our staff. You’ll find modified trucks and street machines in our employee parking lot. We build project cars and use our trucks for towing on weekends. We come from different backgrounds, but we have all learned to appreciate the tremendous power of electronic engine controls to improve performance on the street as well as on the race track. Hypertech is the technology leader in High-performance engine tuning computer-controlled vehicles. Electronic engine controls have evolved rapidly since their introduction in the early ’80s. Hypertech has kept pace with these rapid advances in technology by developing power tuning products that take advantage of the capabilities of these electronic controls. Early automotive computers used replaceable PROMs or chips to calibrate the Electronic Control Module (ECM) for a specific engine, powertrain, and vehicle combination. Hypertech created the original Power Chips to recalibrate these electronic brains for improved performance. As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.

Product Features:

• External Coil
• Product might not be available in all states due to local laws.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
• Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
• Not intended for use in emission controlled vehicles.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Made from silicone to withstand extreme engine oil temperatures and injection molded for a precise fit.

Product Features:

• Made from silicone
• Withstands extreme engine oil temps
• Injection molded for a precise fit

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
• With steel core to provide ultimate excellent blowout resistance.
• Not intended for use in emission controlled vehicles.

Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.

Product Features:

• Maxi-seal fiber material
• Superior blow-out resistance
• High-tensile strength
• Reduces gasket splitting
• Graphite non-wicking rubber
• No cork particles
• Easy removal for disassembly

Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:

• One-piece design
• Eliminates potential leaks
• Prevents over tightening
• Prevents torque loss

Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:

• One-piece design
• Eliminates potential leaks
• Prevents over tightening
• Prevents torque loss

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily