1998 Chevrolet Monte Carlo Engine Cooling Parts

Essential 1998 Chevrolet Monte Carlo Engine Cooling Parts

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Air Charge Temperature Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-806)

Water Pump Mounting Hardware Kit

from

$16.29
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0004)

Engine Coolant Temperature Sensor

from

$35.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

KAI – Radiator (Part No.RAD1519)

Radiator

from

$168.99
New Platinum Pro Radiator, 3.1 Liter, 3.4 Liter And 3.8 Liter Engines, With 5/8 Inch Thick Core

Product Features:
  • 3.1 Liter, 3.4 Liter And 3.8 Liter Engines, With 5/8 Inch Thick Core, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Flex A Lite – Black Magic Electric Fan (Part No.180)

Black Magic Electric Fan

from

$367.99
Black Magic Electric Fan

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Radiator Cap: 15 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

ACDelco – Water Pump Hsng Gask (Part No.G3031202643ACD)

Water Pump Hsng Gask

from

$1.55
Water Pump Hsng Gask

Dorman – Engine Water Pump Pulley (Part No.300-933)

Engine Water Pump Pulley

from

$46.99
Damaged your engine water pump pulley? This pulley is a direct replacement for the original manufacturer’s part on specific vehicle years, makes and models, restoring proper performance.

Product Features:
  • Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles.
  • Durable design – built to withstand the elements and road debris.
  • Thoroughly tested – must pass strict standards to ensure reliable longevity
  • Trustworthy quality – backed by team of engineers and inspectors in United States
See More

Edelbrock – Water Pump Small-Block Victor Pro (Part No.8819)

Water Pump Small-Block Victor Pro

from

$353.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block with in 1 p

Product Features:
  • For Circle Track And Endurance Racing Engines
  • Black Anodized Finish w/0.10-in Thicker Rear Cover
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution To Both Sides Of Block With 1pc
  • Only Flows in One-Direction for Optimum Efficiency
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle (Part No.902-2030)

Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle

from

$17.29
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Daytime Running Light Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Water Pipe O-Ring (Part No.G2026372937ACD)

Water Pipe O-Ring

from

$4.40
Water Pipe O-Ring

Mr. Gasket – Premium Quality Thermostat Gasket with Solid Aluminum Carrier (Part No.738G)

Premium Quality Thermostat Gasket with Solid Aluminum Carrier

from

$31.99
Edge molded rubber water outlet gasket is reusable, great for engines that require regular disassembling for maintenance. Incorporates solid aluminum carrier for strength and rigidity. Can be used with OE replacement or aftermarket chrome water outlets. Requires no gasket sealer.

Product Features:
  • Edge Molded Rubber Water Outlet Gasket Is Reusable
  • Requires No Gasket Sealer
  • Solid Aluminum Carrier For Strength/rigidity
  • Reusable – Ideal for Engines That Are Frequently Taken Apart & Reassembled
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84853)

Coolant Housing/Water Outlet: Gasket Included

from

$26.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4899KT)

Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees

from

$15.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-112)

Coolant Air Bleeder Screw

from

$16.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Mahle – Water Pump Hsng Gask (Part No.G3031212899MAH)

Water Pump Hsng Gask

from

$2.04
Water Pump Hsng Gask

Dorman – Help – Radiator Drain Cocks (Part No.61136)

Radiator Drain Cocks

from

$4.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

KAI – Radiator Cap (Part No.GMK404030657)

Radiator Cap

from

$60.99
New Goodmark Correct Reproduction RC-15 Radiator Cap

Product Features:
  • Rc-15,Correct Reproduction
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Engine Water Pump Gasket (Part No.30060)

Engine Water Pump Gasket

from

$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Mr. Gasket – Water Outlet Gasket (Part No.740)

Water Outlet Gasket

from

$5.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • This gasket is bulk packaged
  • Made from Cellulose/Nitrile Composition
  • Provides Excellent Sealing and Durability
  • These Gaskets are Die Cut for a Precision Fit
  • Fits Small Block Chevy V8 Engines 1955-’90
  • Fits Big Block Chevy V8 Engines 1965-’90
  • Fits Small Block Chrysler 318/360 1979-’92
  • Fits Small Block Chysler 3.9L/5.2L/5.9L Magnum 1992-’03
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.SBA3661)

Engine Coolant Level Sensor

from

$55.99
The engine cooling system is critical to engine sustainability under all operating conditions. The Coolant Level Sensor reports the level of coolant either in the radiator overflow container or in the radiator tank.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Thermostat Housing: Gasket Included (Part No.85946)

Thermostat Housing: Gasket Included

from

$84.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Includes quality thermostat
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-974)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$192.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-603)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$121.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

1998 Chevrolet Monte Carlo Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1998 Chevrolet Monte Carlo. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 85 different Engine Cooling Parts in our inventory ranging from $1.55 to $233.99. That means you can find the exact parts or products you need to keep that 1998 Chevrolet Monte Carlo running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 24 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Chevrolet Monte Carlo. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1998 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,702 reviews in this category, some of the top rated parts include Water Pump: New, Installation Gasket Included with 4.5 stars and THERMOSTAT GASKET with 4.9 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1998 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1998 Chevrolet Monte Carlo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Motorad Engine Cooling Parts

We carry Motorad parts in our stock across Thermostats categories, plus more. For a 1998 Chevrolet Monte Carlo, our most popular Motorad Engine Cooling Parts include:
Standard Thermostat: 192 Degrees
from $15.99
(1)
Standard Thermostat: 192 Degrees
Thermostats

FAQs for 1998 Chevrolet Monte Carlo Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1998 Chevrolet Monte Carlo?

Out of 85 Engine Cooling Parts for the 1998 Chevrolet Monte Carlo, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Standard Thermostat: With Seal, 195 Degrees
from $7.29
(105)
Standard Thermostat: With Seal, 195 Degrees
Thermostats
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
Radiator Caps

What are the top-rated 1998 Chevrolet Monte Carlo Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1998 Chevrolet Monte Carlo based on customer reviews/ratings are:
Water Pump: New, Installation Gasket Included
from $40.99
(191)
Water Pump: New, Installation Gasket Included
“Stock”
THERMOSTAT GASKET
from $4.99
(93)
THERMOSTAT GASKET
“OEM perfect fit.”
2 Pole Radiator Fan Motor
from $34.99
(60)
2 Pole Radiator Fan Motor
“Installed Easially, Works Great!”