1998 Chevrolet Express 3500 Exhaust Parts
More 1998 Chevrolet Express 3500 Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1998 Chevrolet Express 3500, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1998 Chevrolet Express 3500 Exhaust Parts
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21482)
from
$239.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21553)
from
$146.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Exhaust 35229 Exhaust System Hanger Insulator (Part No.35229)
from
$7.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Flange Hardware – 4 Bolts And 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
ARP Auto Racing – For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12 (Part No.134-1102)
from
$41.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 3/8” Wide Header Flange
- 1.181? Underhead Length
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03412B)
from
$20.29
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Clamp Repair (Part No.917-107)
from
$51.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
- Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
- Complete kit – includes clamp and fasteners for a thorough, secure repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (Part No.03133HP)
from
$26.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)
from
$17.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-573)
from
$149.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-391)
from
$148.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-732)
from
$162.99
Certain original equipment exhaust manifolds warp and crack due to lower-grade iron construction. This Dorman OE FIX replacement is made of high-grade ductile iron that better handles heat and stress for greater durability.
Product Features:
See More
Product Features:
- Upgraded materials – this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking
- Complete kit – includes new manifold, manifold gasket, 2 flange gaskets, 3 studs, 3 nuts
- Direct fit – reverse engineered from original equipment for seamless installation
- Quality engineering – designed and tested in the United States
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83509)
from
$696.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99759HM)
from
$228.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99759HM. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51209)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Felpro – Exhaust Pipe Flange Gasket (Part No.61323)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60556)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – EXHAUST FLANGE GASKET (Part No.61694)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Victor Reinz – Catalytic Converter Gasket (Part No.71-14058-00)
from
$7.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 3 (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Down Pipe V-Band Clamp (Part No.904-148)
from
$43.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles
- Ideal solution – engineered to help ensure secure connections between exhaust system components
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$4.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
AP Exhaust – Exhaust Clamp (Part No.H80202394452APE)
from
$9.28
The AP Exhaust / Exhaust Clamp is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
MAHLE Original – EXHAUST MANIFOLD SET (Part No.MS16091)
from
$18.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94054)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Hooker Headers – Super Competition Header Gasket (Part No.10891HKR)
from
$19.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Remflex – Flexible Graphite, Set Of 2, 1-9/16 Inch Round Port Size (Part No.2004)
from
$37.49
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 91587)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Popular 1998 Chevrolet Express 3500 Exhaust Parts Categories
1998 Chevrolet Express 3500 Exhaust Parts
You count on your 1998 Chevrolet Express 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 56 Exhaust Parts ranging in price from $4.99 to $1,324.99, you’re sure to find everything you need for your 1998 Chevrolet Express 3500.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 12 different brands like Walker, Dorman, and Felpro. 1998 Chevrolet Express 3500 Exhaust Parts start as low as $4.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 330 extensive product reviews on 1998 Chevrolet Express 3500 Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Exhaust Manifold Hardware Kit with 4.3 stars and Exhaust Stud Kit – M10-1.5 x 62mm with 4.7 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1998 Chevrolet Express 3500 below to get started!
Top-Rated Exhaust Parts Brands For Your 1998 Chevrolet Express 3500
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Chevrolet Express 3500 running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular MAHLE Original Exhaust Parts
You’ll find popular MAHLE Original brand products across Exhaust Gaskets. All are waiting to get your 1998 Chevrolet Express 3500 back on the road. Some of the top-rated MAHLE Original products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1998 Chevrolet Express 3500, and some of our most reviewed Walker parts include:
from
$328.99
(15)
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
Catalytic Converters
FAQs for 1998 Chevrolet Express 3500 Exhaust Parts
What are the most purchased Exhaust Parts for the 1998 Chevrolet Express 3500?
Out of 56 Exhaust Parts for the 1998 Chevrolet Express 3500, the most popular in our inventory are:
What are the top-rated 1998 Chevrolet Express 3500 Exhaust Parts?
Top-rated Exhaust Parts for your 1998 Chevrolet Express 3500 based on customer reviews/ratings are:
from
$11.99
(12)
Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials
“Gasket worked out great sealed up good no issues”
