1997 Volkswagen Passat Steering and Chassis Parts
More 1997 Volkswagen Passat Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1997 Volkswagen Passat, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1997 Volkswagen Passat Steering and Chassis Parts
Rein – Power Steering Rack Boot (Part No.BKP0019R)
from
$7.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More
Whiteline – Radius Arm Lower Bushing (Part No.KCA422)
from
$90.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Rein – Power Steering Pressure Hose Assembly (Part No.PSH0237)
from
$244.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
Cardone – Rack and Pinion Assembly (Part No.1A-14003)
from
$871.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rare Parts – Sway Bar Link (Part No.RP19013)
from
$70.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$17.99
Camber Bolt Kit
Dorman – Suspension Control Arm (Part No.522-837)
from
$245.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Tie Rod End (Part No.RP27154)
from
$48.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Cardone New – Power Steering Pump (Part No.96-05426)
from
$227.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
MOOG – Ball Joint (Part No.K500390)
from
$65.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Designed to meet or exceed original equipment performance
- Broad coverage for foreign and domestic applications
- Engineered to provide long life and dependability
Rare Parts – Ball Joint (Part No.RP11393)
from
$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rein – Sway Bar Bushing (Part No.AVB0617)
from
$23.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. note: sway bar bushing kits contain the needed pair
- Matches original equipment design specifications
Febi – Sway Bar Bushing (Part No.L1050229984FEB)
from
$11.79
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MOOG – Camber Adjusting Kit (Part No.K90473)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Camber Adjusting Kit (Part No.K9757)
from
$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-1)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-2)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Ball Joint (Part No.K9603)
from
$60.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Driveworks – Steering Tie Rod End (Part No.DW-ES3015R)
from
$15.79
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts help ensure improved steering response and durability.
See More
Driveworks – Steering Tie Rod End (Part No.DW-ES3646)
from
$24.29
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Febi – Ball Joint Lock Plate (Part No.L2026458311FEB)
from
$4.11
Every Febi Ball Joint Lock Plate maintains the OE quality and is to be replaced every time the ball joint is removed or replaced.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured
- Corrosion protection
Popular 1997 Volkswagen Passat Steering and Chassis Parts Categories
1997 Volkswagen Passat Steering and Chassis Parts
You count on your 1997 Volkswagen Passat to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 49 Steering and Chassis Parts ranging in price from $3.86 to $434.99, you’re sure to find everything you need for your 1997 Volkswagen Passat.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Imperial, Cardone, and Driveworks. 1997 Volkswagen Passat Steering and Chassis Parts start as low as $3.86!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 879 extensive product reviews on 1997 Volkswagen Passat Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Camber Adjusting Kit with 3.2 stars and Camber Adjusting Kit with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1997 Volkswagen Passat below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1997 Volkswagen Passat
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Volkswagen Passat running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Driveworks, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Ball Joints and Alignment Hardware. All are waiting to get your 1997 Volkswagen Passat back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1997 Volkswagen Passat, and some of our most reviewed Imperial parts include:
FAQs for 1997 Volkswagen Passat Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1997 Volkswagen Passat?
Out of 49 Steering and Chassis Parts for the 1997 Volkswagen Passat, the most popular in our inventory are:
What are the top-rated 1997 Volkswagen Passat Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1997 Volkswagen Passat based on customer reviews/ratings are:
from
$42.99
(2)
Camber Adjusting Kit
“easy to use/install. easy to follow instructions and works just like it says it does.”
from
$48.49
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
