1997 Volkswagen Golf Exhaust Parts

Essential Exhaust Parts for 1997 Volkswagen Golves

Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.375" Inlet (OD) 2" Outlet (OD) (Part No.55628)

Direct Fit Exhaust Resonator and Pipe Assembly 2.375" Inlet (OD) 2" Outlet (OD)

from

$428.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.125" Inlet (ID) 2.18" Inlet (OD) (Part No.53376)

Direct Fit Exhaust Resonator and Pipe Assembly 2.125" Inlet (ID) 2.18" Inlet (OD)

from

$199.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-31958-00)

Exhaust Manifold Gasket Set

from

$11.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97034)

Exhaust Manifold Gasket Set

from

$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

MAHLE Original – Catalytic Converter Gasket (Part No.F32609)

Catalytic Converter Gasket

from

$5.79
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31603)

Exhaust Pipe Flange Gasket

from

$20.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-084)

Exhaust Hanger

from

$13.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55672)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$265.99
Designed to deliver superior flow and OE-style sound, Walker Quiet-Flow mufflers are available for top-selling domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.17872)

SoundFX Muffler, Universal/ Fabrication Needed

from

$257.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD) (Part No.53051)

Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD)

from

$45.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.53431)

Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

BRExhaust – Exhaust Hanger (Part No.255-102)

Exhaust Hanger

from

$10.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Vaico – Exhaust Hanger (Part No.H8050168987VCO)

Exhaust Hanger

from

$10.87
Exhaust Hanger

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-40926-00)

Exhaust Pipe Flange Gasket

from

$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31559)

Exhaust Pipe Flange Gasket

from

$8.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31611)

3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$11.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Rein – Exhaust Clamp (Part No.EXC0026)

Exhaust Clamp

from

$44.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

HJS – Exhaust Clamp (Part No.H8020424094HJS)

Exhaust Clamp

from

$22.89
Exhaust Clamp

Walker – Exhaust Clamp (Part No.36536)

Exhaust Clamp

from

$48.49
Complete your exhaust repair with the Torca coupler band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • SUPERIOR SEAL — Provides superior 360░ clamping and sealing on muffler inlets, outlets, elbow joints and pipe
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
  • PREMIUM MATERIALS?–?Made from a variety of materials, including low-carbon steel or stainless steel for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
See More

Meyle – Exhaust Stud (Part No.H100525458MEY)

Exhaust Stud

from

$2.21
Exhaust Stud

MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99205HM)

HM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$178.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23710)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$588.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Jetta, 2001-2005 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 508 G and 1J0 254 509 AX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Ultra EPA Direct Fit Catalytic Converter 2.125" Outlet (OD) (Part No.54582)

Ultra EPA Direct Fit Catalytic Converter 2.125" Outlet (OD)

from

$729.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51356)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$202.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93238)

Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$224.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Flowmaster Inc. – Catalytic Converter – Universal – 222 Series – 2.00 in. Inlet/Outlet – 49 State (Part No.2220120)

Catalytic Converter - Universal - 222 Series - 2.00 in. Inlet/Outlet - 49 State

from

$131.99
Flowmaster 49-state universal catalytic converters are designed to meet federal EPA emissions requirements on a wide variety of applications. These high quality catalytic converters are manufactured in the USA, and feature stainless steel outer shell construction for maximum durability. The internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid MIL (Malfunction Indicator Lamp) code issues that are common with lower quality converters. Universal catalytic converters require welding and/or fabrication and should be installed by qualified technicians. Please refer to the Flowmaster application guide for specific part number/vehicle applications. Flowmaster 49-state converters are not legal for sale or use on vehicles licensed or operated in the state of California.

Product Features:
  • Excellent flow characteristics
  • Engineered to keep the “MIL” light off
  • Available for a wide variety of applications
  • Stainless steel construction
  • Made in the USA
See More

Upgrade your 1997 Volkswagen Golf with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1997 Volkswagen Golf, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Exhaust Parts are key to keeping your Golf functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Exhaust Parts for the 1997 Volkswagen Golf, designed to meet your needs without breaking the bank. From Exhaust Hanger replacements to Exhaust Pipes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1997 Volkswagen Golf at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $450.99, with an average price of $91.79. Our 43 Exhaust Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1997 Volkswagen Golf without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Volkswagen Golf, we stock popular OEM and aftermarket Exhaust Parts from top names like Walker Flowtech, and more. Walker Exhaust Parts start at just $1.99 and boast an impressive 4 stars average rating from customers. With 386 customer reviews and counting, our 1997 Volkswagen Golf Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Volkswagen Golf is always ready to roll. We’re committed to providing you with everything you need to keep your Golf in top shape, all in one place. Start shopping confidently below for your 1997 Volkswagen Golf!

Best-Selling Exhaust Hangers for 1997 Volkswagen Golves

Enhance the driving experience in your Volkswagen with 5 quality Exhaust Hanger components, starting at $6.54.

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-047)

Exhaust Hanger

from

$8.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • OE-style design for quality fit
  • Secure sealing for superior durability
  • Manufactured from quality materials to ensure maximum durability
  • Reduced vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-034)

Exhaust Hanger

from

$21.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Febi – Exhaust Hanger (Part No.H805038580FEB)

Exhaust Hanger

from

$8.40
Exhaust Hanger

HJS – Exhaust Hanger (Part No.H8050946675HJS)

Exhaust Hanger

from

$6.54
Exhaust Hanger

Most Popular 1997 Volkswagen Golf Exhaust Pipes

Customize your Volkswagen with 8 Exhaust Pipes products like Exhaust Pipe and Flange Gaskets, Exhaust Resonator and Pipe Assemblies, and Exhaust Extension Pipes, all priced under $161.99.

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31611)

3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$11.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD) (Part No.53051)

Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD)

from

$45.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31559)

Exhaust Pipe Flange Gasket

from

$8.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52075)

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$161.99
Walker Resonators And Welded Resonator Assemblies provide precise tuning technologies to ensure excellent flow characteristics And OE-style sound. They feature 100% aluminized construction for longer life, quality appearance And favorable acoustics. These are OE-style resonators that fit, perform And sound like the original system.

Product Features:
  • EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-15787-00)

Exhaust Pipe Flange Gasket

from

$16.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-27331-30)

Exhaust Pipe Flange Gasket

from

$15.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

HJS – Exhaust Gasket (Part No.H4000125941HJS)

Exhaust Gasket

from

$14.86
Exhaust Gasket

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-28461-00)

Exhaust Pipe Flange Gasket

from

$11.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Top Picks for 1997 Volkswagen Golf Exhaust Manifold and Headers

Upgrade Volkswagen Golves with top-quality Exhaust Manifold and Headers parts, including 1 OEM and aftermarket selections for your 1997 model.

Meyle – Exhaust Stud (Part No.H100525458MEY)

Exhaust Stud

from

$2.21
Exhaust Stud

In-Demand Exhaust Fittings for 1997 Volkswagen Golves

Select from 10 premium Exhaust Fittings parts for your 1997 Volkswagen Golf, with prices ranging from $1.99 to $29.87.

CRP – Exhaust Clamp (Part No.H8020570170CRP)

Exhaust Clamp

from

$29.87
Exhaust Clamp

BRExhaust – Exhaust Clamp (Part No.250-254)

Exhaust Clamp

from

$19.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Rein – 50X95 Dual Clamp (Part No.EXC0022)

50X95 Dual Clamp

from

$18.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

BRExhaust – Exhaust Clamp (Part No.250-354)

Exhaust Clamp

from

$5.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – Clamp Band, Butt Joint Bolt Dia 0.4375 Length Nut Type Hex Pipe Dia 2.25 (Part No.33979)

Clamp Band, Butt Joint Bolt Dia 0.4375 Length Nut Type Hex Pipe Dia 2.25

from

$25.49
Complete your exhaust repair with the MEGA clamp. Designed to seal muffler inlets, outlets, elbow joints and pipe, the MEGA clamp is manufactured from durable and robust aluminized steel or T-304 stainless steel for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to connect undercar exhaust components
  • SUPERIOR SEAL ┐ Lap joint clamps provides superior sealing in connecting ID to OD pipes, while butt joint clamps provide superior sealing in connecting OD to OD
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
  • BETTER TOGETHER — Use Walker accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
See More

HJS – Exhaust Clamp (Part No.H802017974HJS)

Exhaust Clamp

from

$8.72
Exhaust Clamp

HJS – Exhaust Clamp (Part No.H802056162HJS)

Exhaust Clamp

from

$7.14
Exhaust Clamp

Bosal – Exhaust Clamp (Part No.H8020921412BSL)

Exhaust Clamp

from

$6.84
Exhaust Clamp

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Sold 1997 Volkswagen Golf Exhaust Mufflers

Explore our best-selling Volkswagen parts for the 1997 Golf among 2 OEM and aftermarket options starting from $199.99.

Walker – Quiet-Flow Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD) (Part No.52171)

Quiet-Flow Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD)

from

$211.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (ID) 2" Outlet (OD) (Part No.53052)

Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (ID) 2" Outlet (OD)

from

$199.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Top-Rated Exhaust Parts Brands For Your 1997 Volkswagen Golf

Shop for the best-rated brands offering Exhaust Parts and other products for your 1997 Volkswagen Golves. Below you’ll find some of our best rated Exhaust Parts from Walker and Flowtech, and more. Exhaust Parts from these brands that fit a 1997 Golf start at just $1.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Walker 1997 Volkswagen Golf Exhaust Parts

When it comes to maintaining or upgrading your 1997 Volkswagen Golf, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 1997 Volkswagen Golf. With over 12 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $80.18. Plus, with over 69 customer reviews and an average rating of 4 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance
from
$161.99
This product is not rated

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

“”

Popular Flowtech 1997 Volkswagen Golf Exhaust Parts

Flowtech auto parts is one of the highest quality Exhaust Part brands in the market. Any 1997 Volkswagen Golf owner should feel confident when installing genuine Flowtech parts in their vehicle. To ensure the best fit and performance for your 1997 Golf, Advance Auto Parts carries a full inventory of 1 Flowtech Exhaust Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Flowtech Exhaust Parts range up to $85.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Terminator; Exhaust Tips
from
$85.99

(5)

Terminator; Exhaust Tips

“very nice…worth the money.”

FAQs for 1997 Volkswagen Golf Exhaust Parts

Which Exhaust Parts are best-sellers for 1997 Volkswagen Golves?

Out of 43 Exhaust Parts that fit 1997 Volkswagen Golves, the following parts are the top sellers:

What’s the price range for 1997 Volkswagen Golf Exhaust Parts?

Exhaust Part prices for the 1997 Volkswagen Golf start at $1.99 and go up to $450.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 1997 Volkswagen Golf?

The average price for Exhaust Parts for the 1997 Volkswagen Golf is $91.79. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Volkswagen Golf model years?

Yes, we currently carry Exhaust Parts for 35 model years of Volkswagen Golves between 1985 and 2024. Exhaust Parts are bought most frequently for the following model years: 2023, 2024, 2022, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Exhaust Parts for my 1997 Volkswagen Golf?

The cheapest 1997 Volkswagen Golf Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 1997 Volkswagen Golf?

Out of 386 reviews by customers, our 1997 Volkswagen Golf Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1997 Volkswagen Golf and their top-rated products:

What types of Exhaust Parts do you sell for my 1997 Volkswagen Golf?

Can I get help with 1997 Volkswagen Golf Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Exhaust Parts and more.

What is your return policy for Volkswagen Golf Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Golf Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.