1997 Pontiac Trans Sport Ignition Boots

Essential 1997 Pontiac Trans Sport Ignition Boots

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

8Mm Super Stock Spiral Uni Bu

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

NGK – Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty (Part No.51272)

Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty

from

$41.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding over premium ferrite magnetic core delivers ultra-low resistance, a more powerful spark and excellent EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6009)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$48.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

8Mm Super Stock Graphite Uni

from

$65.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

NGK – NGK Wire Set (Part No.51073)

NGK Wire Set

from

$35.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-6117)

Spark Plug Wire Set

from

$31.99
CARQUEST Premium wire sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements and retain the original color, performance, fit, form and function of the OE wire.

Product Features:
  • SAE J2031 Class E cable resists heat, cold and electrical interference
  • O.E./O.E.S. specified wire lengths
  • O.E./O.E.S. specified insulators
  • Limited lifetime warranty
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6019)

Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set

from

$45.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

ACDelco – Professional Ignition Wire Set (Part No.F1020575900ACD)

Professional Ignition Wire Set

from

$63.79
Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products.

Product Features:
  • Designed to match Original Equipment wire sets in critical areas such as cable length and diameter, terminal design and insulator position.
  • Have broad coverage available for most vehicles on the road today from 1980 to present.
  • Provide a high degree of Radio Frequency Interference (RFI) suppression.
  • Are designed to offer fit, form and function for optimum performance.
  • Kevlar®-reinforced fiberglass core in select sets for increased strength.
  • Core sheathed in radio-static-absorbent material for increased RFI suppression.
  • Wire-wound, stainless-steel alloy conductor for maximum spark delivery and RFI suppression on most applications.
  • A layer of conductive heat-resistant latex for added durability.
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability.
  • Thick silicone outer jacket for excellent heat resistance.
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6107)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$33.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

1997 Pontiac Trans Sport Ignition Boots

Maybe you’re in the middle of a full rebuild of that 1997 Pontiac Trans Sport. Maybe you just need a couple of Ignition Boots. Either way, Advance Auto Parts has 3 different Ignition Boots in our inventory ranging from $35.99 to $63.79. That means you can find the exact parts or products you need to keep that 1997 Pontiac Trans Sport running smoothly.

Ignition Boots are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Pontiac Trans Sport. NGK, DENSO, and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Boots for your 1997 Pontiac Trans Sport, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Boots to keep your 1997 Pontiac Trans Sport rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Boots Brands To Make Your 1997 Pontiac Trans Sport Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Pontiac Trans Sport demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Trans Sport the best it can be. Be sure to browse some of our top Ignition Boots brands and parts.

Popular DENSO Ignition Boots

We carry DENSO parts in our stock across Spark Plug Boots categories, plus more. For a 1997 Pontiac Trans Sport, our most popular DENSO Ignition Boots include:
Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set
from $45.99
(1)
Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set
Spark Plug Boots

FAQs for 1997 Pontiac Trans Sport Ignition Boots

What are the most purchased Ignition Boots for the 1997 Pontiac Trans Sport?

Out of 3 Ignition Boots for the 1997 Pontiac Trans Sport, the most popular in our inventory are:
NGK Wire Set
from $35.99
This product is not rated
NGK Wire Set
Spark Plug Boots
Professional Ignition Wire Set
from $63.79
This product is not rated
Professional Ignition Wire Set
Spark Plug Boots