1997 Pontiac Grand Am Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1997 Pontiac Grand Ams

Delphi – Fuel Injection Pressure Regulator (Part No.FP10509)

Fuel Injection Pressure Regulator

from

$111.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

ACDelco – Evaporation Pres Sensor (Part No.E2070451781ACD)

Evaporation Pres Sensor

from

$111.33
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.
See More

Dorman – Fuel Tank Strap Coated For Rust Prevention (Part No.578-187)

Fuel Tank Strap Coated For Rust Prevention

from

$40.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Tank Lock Ring LO1582927 (Part No.LO1582927)

Fuel Tank Lock Ring LO1582927

from

$12.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:
  • Engineered to meet or exceed all OEM specifications
  • Precision stamped and are treated with a rust proof finish to ensure durability and strength
See More

ACDelco – Fuel Injector Seal K (Part No.C1012207823ACD)

Fuel Injector Seal K

from

$21.01
Fuel Injector Seal K

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70234-1)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$6.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Delphi – EGR Valve (Part No.EG10022)

EGR Valve

from

$223.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:
  • No spacers or washers are required and they come with gaskets for an exact fit, saving time and labor
  • All parts used in the manufacture process are Delphi validated, tested and matched to the vehicle application, and manufactured in a Delphi ISO certified facility
  • Delphi’s OE line of EGR valves provides accurate exhaust flow and emission control
  • Available in port, back pressure, and linear configurations to cover many engine applications
  • Designed and built using high-temperature and corrosion-resistant materials that perform exceptionally under all engine environments
  • Each valve and seat is precision machined, helping to maintain long-term stability and performance
  • No audible regulator noise
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4396)

Engine Coolant Temperature Sensor

from

$34.99
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Fuel Injector Connector (Part No.ABA3465)

Fuel Injector Connector

from

$30.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT187)

Air Charge Temperature Sensor Connector

from

$40.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Dorman – Chrysler, GM Push Rivet (Part No.961-359D)

Chrysler, GM Push Rivet

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1039)

Vapor Canister Purge Solenoid

from

$38.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Idle Air Control Valve (Part No.ABA3466)

Idle Air Control Valve

from

$75.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Pump Strainer FS260354 (Part No.FS260354)

Fuel Pump Strainer FS260354

from

$9.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61053)

Fuel Injection Throttle Body Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)

Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector

from

$24.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

Manifold Absolute Pressure Sensor

from

$73.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

ACDelco – 3-Way Female Black Multi-Purpose Pigtail (Part No.PT782)

3-Way Female Black Multi-Purpose Pigtail

from

$49.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

from

$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Spectra Premium – Module Assembly; Includes Pump, Sender, Float, Strainer and Reservoir (Part No.SP261M)

Module Assembly; Includes Pump, Sender, Float, Strainer and Reservoir

from

$232.99
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Triple barb hose fitting provides superior, long-lasting seal
  • Superior return porting for optimum fuel flow
  • Enhanced pump to flange harness design provides worry-free electrical performance
  • Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
  • Gradient density, dual zone filtration designed for better contamination resistance
See More

Carquest – Fuel Injector (Part No.67365)

Fuel Injector

from

$115.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
  • Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
  • Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Help – Fuel Line Connector (Part No.55180)

Fuel Line Connector

from

$18.99
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:
  • Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
  • Quality construction – manufactured from premium materials for a long service life
  • Saves money – replace only the part, not the entire assembly
  • Excellent value – original equipment quality at a lower price
See More

ACDelco – Vapor Canister Purge Valve (Part No.214-641)

Vapor Canister Purge Valve

from

$59.99
ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Controls vapor flow from canister to engine
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1752)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1237)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Idle Air Control Valve (Part No.76A1005)

Idle Air Control Valve

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 1997 Pontiac Grand Am with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1997 Pontiac Grand Am, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Grand Am functioning at its best. At Advance Auto Parts, we offer a wide selection of 133 Fuel and Emissions Systems for the 1997 Pontiac Grand Am, designed to meet your needs without breaking the bank. From Gas Cap replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1997 Pontiac Grand Am at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.49 to $467.99, with an average price of $82.36. Our 133 Fuel and Emissions Systems in stock come from 23 trusted brands, so you’re sure to find the right part for your 1997 Pontiac Grand Am without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Pontiac Grand Am, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Bosch, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $2.49 and boast an impressive 5 stars average rating from customers. Bosch and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $2.49, and at an average 5 stars rating. With 2,370 customer reviews and counting, our 1997 Pontiac Grand Am Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Pontiac Grand Am is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Am in top shape, all in one place. Start shopping confidently below for your 1997 Pontiac Grand Am!

Best-Selling Gas Caps for 1997 Pontiac Grand Ams

Enhance the driving experience in your Pontiac with 7 quality Gas Cap components, starting at $17.79.

ACDelco – GM Original Equipment Fuel Cap with Tether Strap (Part No.E2010575733ACD)

GM Original Equipment Fuel Cap with Tether Strap

from

$39.50
The ACDelco GM Original Equipment Fuel Cap is a threaded cap that seals your vehicle’s fuel tank filler, and is a GM-recommended replacement for your vehicle’s original component. The fuel cap has a rubber gasket that provides a liquid-tight seal to keep fuel in and water and dirt out. The cap may have a check-valve that lets air in or out depending on the air pressure inside the tank. This original equipment regular fuel cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Provides a tight seal to keep your vehicle’s fuel tank closed
  • A sealed fuel tank reduces vapor emissions which helps the environment
  • Prevents lost fuel in order to help reduce your trips to the gas station
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Cap: 10836, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10836)

Fuel Cap: 10836, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$17.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10506, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10506)

Locking Fuel Cap: 10506, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10522, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10522)

Locking Fuel Cap: 10522, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC834T)

Tethered Fuel Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Locking Fuel Cap (Part No.10517)

Locking Fuel Cap

from

$20.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Worldpac – FUEL TANK CAP (Part No.E2010575733GAT)

FUEL TANK CAP

from

$38.42
FUEL TANK CAP

Most Popular 1997 Pontiac Grand Am Oxygen Sensors

Customize your Pontiac with 12 Oxygen Sensors products like Oxygen Sensors, all priced under $96.99.

GM Genuine Parts – Oxygen Sensor: 4 Wires, 249.4 mm Long, Heated, Exact Fit (Part No.AFS109)

Oxygen Sensor: 4 Wires, 249.4 mm Long, Heated, Exact Fit

from

$79.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Detects oxygen content in the exhaust gases to help optimize emissions
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

DENSO – Oxygen Sensor: 4 Wire, 15.35" Long, Heated, Exact Fit (Part No.234-4018)

Oxygen Sensor: 4 Wire, 15.35" Long, Heated, Exact Fit

from

$66.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

from

$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 4 Wire, 72.64" Long, Heated, Exact Fit (Part No.13450)

Oxygen Sensor: 4 Wire, 72.64" Long, Heated, Exact Fit

from

$59.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 4 Wire, 15.24" Long, Heated, Exact Fit (Part No.13474)

Oxygen Sensor: 4 Wire, 15.24" Long, Heated, Exact Fit

from

$60.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

from

$32.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal Fit (Part No.15732)

Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal Fit

from

$77.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

NTK – Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit (Part No.21002)

Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit

from

$29.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

NTK – Switching Oxygen Sensor: 4 Wire, 15.25" Long, Heated, Direct Fit (Part No.21539)

Switching Oxygen Sensor: 4 Wire, 15.25" Long, Heated, Direct Fit

from

$63.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010118192ND)

First Time Fit Oxygen Sensor

from

$63.83
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

NTK – Switching Oxygen Sensor: 4 Wire, 67.75" Long, Heated, Direct Fit (Part No.21550)

Switching Oxygen Sensor: 4 Wire, 67.75" Long, Heated, Direct Fit

from

$96.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010118191ND)

First Time Fit Oxygen Sensor

from

$92.74
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Top Picks for 1997 Pontiac Grand Am Air Flow Sensors

Upgrade Pontiac Grand Ams with top-quality Air Flow Sensors parts, including 25 OEM and aftermarket selections for your 1997 model.

Driveworks – MAP Sensor (Part No.31390)

MAP Sensor

from

$65.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Delphi – Air Charge Temperature Sensor (Part No.TS10072)

Air Charge Temperature Sensor

from

$20.49
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors are built with the latest OE technology
  • Delphi temperature sensors are impervious to electrical noise and interference
  • Part is validated, tested and matched to the right vehicle application
  • Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points
See More

NTK – NTK Oxygen Sensor (Part No.C501063030NTK)

NTK Oxygen Sensor

from

$39.79
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1015)

Manifold Absolute Pressure Sensor (MAP)

from

$65.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

NTK – Multi-Purpose Temperature Sensor (Part No.EF0008)

Multi-Purpose Temperature Sensor

from

$25.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK¿s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK¿s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
  • NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
See More

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-1545)

Manifold Absolute Pressure (MAP) Sensor

from

$88.99
ACDelco GM Original Equipment Manifold Absolute Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Air Cleaner Temperature Sensor (Part No.213-243)

Air Cleaner Temperature Sensor

from

$29.99
ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

Manifold Absolute Pressure Sensor

from

$73.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT187)

Air Charge Temperature Sensor Connector

from

$40.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

NTK – Air Charge Temperature Sensor (Part No.AJ0003)

Air Charge Temperature Sensor

from

$27.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
  • The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.
See More

ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010322339ACD)

GM Original Equipment Oxygen Sensor

from

$114.20
The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:
  • Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)

Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector

from

$24.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Bosch – Bosch Oxygen Sensor (Part No.C5010126269BOS)

Bosch Oxygen Sensor

from

$61.87
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

FAE – Engine Coolant Temperature Sensor (Part No.C6020175714FAE)

Engine Coolant Temperature Sensor

from

$22.13
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1123)

Manifold Absolute Pressure Sensor (MAP)

from

$51.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

ACDelco – Water Temp. Sensor (Part No.C6020581131ACD)

Water Temp. Sensor

from

$58.18
Water Temp. Sensor

Bosch – Bosch Oxygen Sensor (Part No.C501033456BOS)

Bosch Oxygen Sensor

from

$35.87
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.ECA1198)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Delphi – Air Temperature Sensor (Part No.C6000175619DEL)

Air Temperature Sensor

from

$30.68
Delphi’s Air Temperature Sensors are continuous function devices that change resistance inversely to temperature. They measure engine intake air temperature in the manifold, intake air duct, and air cleaner. A signal is then sent to the powertrain control module.

Product Features:
  • High-temperature thermoplastic shell for durability
  • Patented, lightweight, and cost-effective pre-mold subassembly
  • Design flexibility to match calibration criteria, meet mounting and packaging requirements, and integrate with systems
  • Customized packaging of mounting features, sealing options, connection system, and resistance output
  • Crimpless conductive path to the negative temperature coefficient thermistor and calibration certification for enhanced reliability and accuracy; also eliminates an electrical interface
  • 100 percent resistance calibration verification helps ensure quality and reliability
See More

Autopart International Inc – MAP Sensor (Part No.C70442056072API)

MAP Sensor

from

$123.71
MAP Sensor

ACDelco – Manifold Absolute Pressure Sensor (Part No.213-3205)

Manifold Absolute Pressure Sensor

from

$84.99
ACDelco Professional Manifold Absolute Pressure Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020206740ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$56.25
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Air Cleaner Temperature Sensor (Part No.25171651)

Air Cleaner Temperature Sensor

from

$39.99
ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Air Cleaner Temperature Sensor (Part No.C6000339701ACD)

GM Original Equipment Air Cleaner Temperature Sensor

from

$38.43
ACDelco GM Original Equipment Temperature Sensors are GM-recommended replacements for your vehicle’s original components. It senses the temperature of various liquids for a variety of components including radiator cooling fans, temperature gauges, and warning indicators. Typically, the temperature sensor sends a signal to the control module and the control module then controls the on/off function of another component. These original equipment multi-purpose temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine operating at proper temperature
  • Sends accurate temperature readings to the gauge
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4396)

Engine Coolant Temperature Sensor

from

$34.99
An ACDelco Professional, premium aftermarket Engine Coolant Temperature Sensor is a high quality replacement for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

In-Demand Fuel Pumps for 1997 Pontiac Grand Ams

Select from 10 premium Fuel Pumps parts for your 1997 Pontiac Grand Am, with prices ranging from $17.35 to $467.99.

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM391FA)

Fuel Tank and Pump Assembly Combination

from

$467.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank assemblies meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Reduce labor time up to 52% by using our fuel tank assembly which includes the fuel tank, fuel tank straps and fuel pump
  • Designed to ensure a debris free, clean fuel system upon replacement
  • Fuel tanks made with corrosion resistant, OE approved, Ni Terne steel
  • Proudly manufactured in Canada under stringent quality systems (QS-9000 and ISO 9002)
See More

Delphi – Fuel Pump Strainer (Part No.FS0031)

Fuel Pump Strainer

from

$18.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M219669)

Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer

from

$199.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Delphi – Series 7000 Fuel Module (Part No.E3001422327DEL)

Series 7000 Fuel Module

from

$356.78
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness (Part No.FG0170)

Fuel Pump Module Assembly: With Float Arm, Seal, Splices, Wire Harness

from

$331.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Autopart International Inc – Fuel Pump Assembly (Part No.E30012002014API)

Fuel Pump Assembly

from

$320.65
Fuel Pump Assembly

Spectra Premium – Module Assembly; Includes Pump, Sender, Float, Strainer and Reservoir (Part No.SP261M)

Module Assembly; Includes Pump, Sender, Float, Strainer and Reservoir

from

$232.99
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Triple barb hose fitting provides superior, long-lasting seal
  • Superior return porting for optimum fuel flow
  • Enhanced pump to flange harness design provides worry-free electrical performance
  • Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
  • Gradient density, dual zone filtration designed for better contamination resistance
See More

Dorman – Fuel Pump Module Assembly (Part No.2630320)

Fuel Pump Module Assembly

from

$189.99
This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life.

Product Features:
  • Direct replacement – this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles
  • Durable construction – this fuel pump is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this fuel pump assembly has undergone rigorous testing to ensure reliable performance
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Spectra Premium – Fuel Screen (Part No.E1010210382RPT)

Fuel Screen

from

$17.35
Fuel Screen

Most Sold 1997 Pontiac Grand Am Fuel Injectors

Explore our best-selling Pontiac parts for the 1997 Grand Am among 32 OEM and aftermarket options starting from $2.99.

Carquest – Fuel Injection Pressure Regulator (Part No.22852)

Fuel Injection Pressure Regulator

from

$80.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Carquest – Fuel Injector (Part No.57094)

Fuel Injector

from

$100.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
  • Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest – Fuel Injection Pressure Regulator (Part No.22849)

Fuel Injection Pressure Regulator

from

$70.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Dorman – Help – Fuel Injector O-Ring Assortment (Part No.90101)

Fuel Injector O-Ring Assortment

from

$16.99
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:
  • Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
  • Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7204)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$89.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Accel – 6-Pack Performance Fuel Injectors 6-Pack: Improved Efficiency and Cleaner Engine (Part No.150615)

6-Pack Performance Fuel Injectors 6-Pack: Improved Efficiency and Cleaner Engine

from

$435.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
  • Accurate Metering Control Even At Ultra-Low And High Duty Cycles
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS017)

Fuel Injector Seal Kit

from

$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Spectra Premium – Mass Air Flow Sensor (Part No.MA100)

Mass Air Flow Sensor

from

$107.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • Platinum connector threads reduce the number of connection points for faster reaction to change
  • Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
  • Ceramic board provides reliable voltage to eliminate engine rough-idle problems
  • Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Delphi – Mass Air Flow Sensor (Part No.AF10055)

Mass Air Flow Sensor

from

$177.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

GM Genuine Parts – Fuel Injector O-Ring Kit with 8 Bushings and 16 O-Rings (Part No.217-3102)

Fuel Injector O-Ring Kit with 8 Bushings and 16 O-Rings

from

$31.49
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013414748ACD)

GM Original Equipment Fuel Injector O-Ring Kit

from

$50.08
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Accel – Perf Fuel Injectors 19Lb 6-Pak (Part No.150619)

Perf Fuel Injectors 19Lb 6-Pak

from

$423.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
See More

Accel – Perf Fuel Injector 15Lb Each (Part No.150115)

Perf Fuel Injector 15Lb Each

from

$84.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1038)

Fuel Injection Pressure Regulator

from

$66.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

GM Genuine Parts – Mass Airflow Sensor Kit with Wiring Connector (Part No.213-4527)

Mass Airflow Sensor Kit with Wiring Connector

from

$244.99
GM Genuine Parts Mass Air Flow Sensor Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These kits have the necessary parts you need to replace your vehicle’s mass air flow (MAF) sensor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Professional Fuel Injection Pressure Regulator (Part No.C3000575668ACD)

Professional Fuel Injection Pressure Regulator

from

$121.66
The ACDelco Professional, premium aftermarket Fuel Injection Pressure Regulator is the ideal high quality replacement for your GM vehicle. It is a mechanical valve that controls the fuel pressure in the fuel injector rail. The spring-loaded valve returns excess fuel back to the fuel tank. This premium aftermarket replacement fuel injection pressure regulator is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1253)

Remanufactured Fuel Injector

from

$62.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Accel – Perf Fuel Injectors 30Lb 6-Pak (Part No.150630)

Perf Fuel Injectors 30Lb 6-Pak

from

$435.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for increased power and improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1042)

Fuel Injection Pressure Regulator

from

$81.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10003)

Fuel Injection Pressure Regulator

from

$81.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Accel – Perf Fuel Injectors 24Lb 6-Pak (Part No.150624)

Perf Fuel Injectors 24Lb 6-Pak

from

$348.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
See More

ACDelco – Air Mass Sensor (Part No.B3150575648ACD)

Air Mass Sensor

from

$329.12
An ACDelco Professional Remanufactured Air Mass Sensor is the ideal high quality replacement for your GM vehicle. It is a key part of the engine management system. The Air Mass Sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This Air Mass Sensor is manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:
  • Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
  • Undergo the same stringent testing process as the original part
  • Offering the quality, reliability, and durability of OE
  • Manufactured to OE specification for fit, form, and function
See More

Delphi – Delphi Air Mass Sensor (Part No.B3150740797DEL)

Delphi Air Mass Sensor

from

$197.01
All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:
  • Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
  • Heated sensing elements are very robust to damage from dust impingement
  • Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
  • Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
  • Patented dimple design eliminates the need for a flow straightener in most applications
  • Probe design offers low restriction air measurement driving increased horsepower
  • Interchangeability is enabled by common mounting footprint
See More

Delphi – Fuel Pressure Regulator (Part No.C3000207679DEL)

Fuel Pressure Regulator

from

$119.45
For more than a century, Delphi has been making the parts cars are born with. Delphi is proud of its OE heritage, and over the years they have used that experience to expand into a global aftermarket supplier.

Product Features:
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation
  • No audible regulator noise
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability.
See More

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-8309)

Remanufactured Mass Air Flow Sensor

from

$93.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures an d lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle¿s engine control management system.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

ACDelco – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT787)

6-Way Female Black Multi-Purpose Pigtail

from

$56.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1463)

Remanufactured Fuel Injector

from

$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

ACDelco – GM Original Equipment Fuel Injection Pressure Regulator O-Ring (Part No.C3002374028ACD)

GM Original Equipment Fuel Injection Pressure Regulator O-Ring

from

$32.26
The ACDelco GM Original Equipment Fuel Injection Pressure Regulator O-Ring is a GM-recommended replacement that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Fuel Injector O-Ring Kit

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Mahle – FI Throttle Body Mou (Part No.C7001291603MAH)

FI Throttle Body Mou

from

$4.17
FI Throttle Body Mou

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001291603ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$3.98
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1997 Pontiac Grand Am

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1997 Pontiac Grand Ams. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Bosch, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1997 Grand Am start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1997 Pontiac Grand Am Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1997 Pontiac Grand Am, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 1997 Pontiac Grand Am. With over 4 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $3.99. Plus, with over 115 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

EGR/EXHAUST AIR SUPPLY GASKET
from
$3.49
This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

Exhaust Gas Recirculation (EGR) Valve Gasket
from
$2.49

(5)

Exhaust Gas Recirculation (EGR) Valve Gasket

“It’s a gasket. Quality is good and it did the job. Price is right..”

Fuel Injector O-Ring Kit
from
$7.49

(109)

Fuel Injector O-Ring Kit

“Replaced the boring in my TBSS fuel injectors and there is no more leaks.”

Popular Bosch 1997 Pontiac Grand Am Fuel and Emissions Systems

Bosch auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1997 Pontiac Grand Am owner should feel confident when installing genuine Bosch parts in their vehicle. To ensure the best fit and performance for your 1997 Grand Am, Advance Auto Parts carries a full inventory of 7 Bosch Fuel and Emissions Systems. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Bosch Fuel and Emissions Systems range from $31.99 to $77.99, plus, with more than 171 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Bosch Oxygen Sensor
from
$35.87
This product is not rated

Bosch Oxygen Sensor

“”

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit
from
$31.99

(43)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

“Fit correct. Performing properly”

Bosch Oxygen Sensor
from
$61.87
This product is not rated

Bosch Oxygen Sensor

“”

FAQs for 1997 Pontiac Grand Am Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1997 Pontiac Grand Ams?

Out of 133 Fuel and Emissions Systems that fit 1997 Pontiac Grand Ams, the following parts are the top sellers:

What’s the price range for 1997 Pontiac Grand Am Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1997 Pontiac Grand Am start at $2.49 and go up to $467.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1997 Pontiac Grand Am?

The average price for Fuel and Emissions Systems for the 1997 Pontiac Grand Am is $82.36. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Pontiac Grand Am model years?

Yes, we currently carry Fuel and Emissions Systems for 26 model years of Pontiac Grand Ams between 1973 and 2005. Fuel and Emissions Systems are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1996.

What are the cheapest Fuel and Emissions Systems for my 1997 Pontiac Grand Am?

The cheapest 1997 Pontiac Grand Am Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 1997 Pontiac Grand Am?

Out of 2,370 reviews by customers, our 1997 Pontiac Grand Am Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1997 Pontiac Grand Am and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 1997 Pontiac Grand Am?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1997 Pontiac Grand Am:

Can I get help with 1997 Pontiac Grand Am Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Fuel and Emissions Systems and more.

What is your return policy for Pontiac Grand Am Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Am Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.