1997 Oldsmobile Regency Ignition and Tune-Up Products
More 1997 Oldsmobile Regency Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1997 Oldsmobile Regency, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1997 Oldsmobile Regency Ignition and Tune-Up Products
ACDelco – Spark Plug Wire Heat Shield (Part No.8006)
from
$8.49
ACDelco GM Original Equipment Spark Plug Heat Shields help protect the spark plug insulator and plug wire boot from the heat of the exhaust manifold, and are GM-recommended replacements for your vehicle’s original components. These original equipment heat shields have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps protect spark plug boot from cracking and deteriorating from heat
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Knock Sensor (Part No.AS10009)
from
$60.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Accel – Universal Fit Spiral 8.8mm Core; Spark Plug Wire Set (Part No.8033)
from
$124.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Product Features:
See More
Product Features:
- 500 Ohms/ft. Of Resistance
- 550° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
ACDelco – GM Original Equipment Ignition Wire Set (Part No.F1020323274ACD)
from
$62.79
Built to match the original equipment in length and fit, ACDelco OES Ignition Wire Sets also offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- ACDelco OES wire sets are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
- Have broad coverage available for most vehicles on the road today from 1980 to present
- Provide a high degree of Radio Frequency Interference (RFI) suppression
- Are designed to offer fit, form and function for optimum performance
- Kevlar reinforced fiberglass core in select sets for increased strength
- Core sheathed in radio-static absorbent material for increased RFI suppression
- Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
- A layer of conductive heat-resistant latex for added durability
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
- Thick silicone outer jacket for excellent heat resistance
- Limited lifetime warranty*
ACDelco – GM Original Equipment Ignition Control Module, New (Part No.F6000440305ACD)
from
$460.16
An ACDelco GM Original Equipment Ignition Control Module is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. It has been laser trimmed to provide precise values and reduce deterioration and damage. This ignition control module includes a copper slug heat sink to help dissipate heat and create a more stable environment and it also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. This original equipment ignition control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Feature electronically welded lead connections to reduce heat stress failure or cold joints
- Laser trimmed to provide precise values and reduce deterioration and damage
- Increase voltage in order for the spark plugs to ignite the air/fuel mixture
- Include a copper slug heat sink to help dissipate heat and create a more stable environment
- Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
- Undergo stringent testing, often under extreme or unusual conditions, to help deliver the quality parts you expect from ACDelco
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
GM Genuine Parts – Ignition Coil Interface Module (Part No.D1977A)
from
$355.99
GM Genuine Parts Ignition Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They increase voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. A GM Genuine Parts Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. It has been laser trimmed to provide precise values and reduce deterioration and damage. This ignition control module includes a copper slug heat sink to help dissipate heat and create a more stable environment and it also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Feature electronically welded lead connections to reduce heat stress failure or cold joints
- Laser trimmed to provide precise values and reduce deterioration and damage
- Increase voltage in order for the spark plugs to ignite the air/fuel mixture
- Include a copper slug heat sink to help dissipate heat and create a more stable environment
- Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Professional Ignition Wire Set (Part No.F1020582520ACD)
from
$74.60
Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- Designed to match Original Equipment wire sets in critical areas such as cable length and diameter, terminal design and insulator position.
- Have broad coverage available for most vehicles on the road today from 1980 to present.
- Provide a high degree of Radio Frequency Interference (RFI) suppression.
- Are designed to offer fit, form and function for optimum performance.
- Kevlar®-reinforced fiberglass core in select sets for increased strength.
- Core sheathed in radio-static-absorbent material for increased RFI suppression.
- Wire-wound, stainless-steel alloy conductor for maximum spark delivery and RFI suppression on most applications.
- A layer of conductive heat-resistant latex for added durability.
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability.
- Thick silicone outer jacket for excellent heat resistance.
Carquest Premium – Spark Plug Wire Set (Part No.35-6141)
from
$29.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, T16EPR-U15 (Part No.5023)
from
$2.99
U-Groove design provides better ignitability for increased engine efficiency.
Product Features:
See More
Product Features:
- Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
- Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Lasts twice as long as most conventional plugs
- 100% pre-fired to assure reliable operation
- U-Groove Conventional
ACDelco – Double Platinum Spark Plug: Original Equipment Replacement (Part No.41-902)
from
$9.79
ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
- Approved by US Legal 7/31/19
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Switch (Part No.CSE1608)
from
$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Switch (Part No.CSE1836)
from
$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1174)
from
$64.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1003)
from
$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.10107-042F)
from
$10.29
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Delphi – Spark Plug Wire Set (Part No.XS10232)
from
$42.49
Pre-Greased Spark Plug Boots for Quicker Installation; Delphi Packard-marked Cable for OE Component Confirmation; OE Boots, Terminals, and Lead Lengths for No Hassle Installation; Application Correct Seven and Eight Millimeter Cable Sizes for Correct Fit
Product Features:
See More
Product Features:
- Pre-greased spark plug boots for quicker installation
- OE boots, terminals and lead lengths for no hassle installation
ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 6 Wire Set (Part No.746U)
from
$63.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
NGK – NGK Wire Set (Part No.51096)
from
$44.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
ACDelco – Ignition Wire Holder (Part No.F1060289679ACD)
from
$2.05
Ignition Wire Holder
Carquest Premium – Ignition Control Module Connector (Part No.PTC1312)
from
$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – GM Original Equipment Electronic Ignition Control Module Pigtail (Part No.F2047573223ACD)
from
$125.30
ACDelco GM Original Equipment Ignition Control Module Connector is a GM-recommended replacement and will provide the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Direct Ignition Coil Kit (Part No.E51)
from
$43.05
We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- Ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48780)
from
$56.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1493)
from
$67.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1518)
from
$42.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Delphi – Ignition Coil (Part No.GN10123)
from
$53.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 3 Count (Part No.EBC1518-3)
from
$94.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Popular 1997 Oldsmobile Regency Ignition and Tune-Up Products Categories
1997 Oldsmobile Regency Ignition and Tune-Up Products
You count on your 1997 Oldsmobile Regency to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 60 Ignition and Tune-Up Products ranging in price from $2.05 to $460.16, you’re sure to find everything you need for your 1997 Oldsmobile Regency.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like NGK, AC Delco, and Autolite. 1997 Oldsmobile Regency Ignition and Tune-Up Products start as low as $2.05!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,202 extensive product reviews on 1997 Oldsmobile Regency Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are PT16TT Platinum TT Spark Plug with 4.6 stars and Direct Ignition Coil Kit with 4.6 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1997 Oldsmobile Regency below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1997 Oldsmobile Regency
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Oldsmobile Regency running right for years to come. In our inventory you’ll find brands like NGK, AC Delco, Autolite, and even more.
Popular Dorman – Help Ignition and Tune-Up Products
You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1997 Oldsmobile Regency back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1997 Oldsmobile Regency, and some of our most reviewed NGK parts include:
FAQs for 1997 Oldsmobile Regency Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1997 Oldsmobile Regency?
Out of 60 Ignition and Tune-Up Products for the 1997 Oldsmobile Regency, the most popular in our inventory are:
from
$11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
from
$10.99
(46)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT16TT
Spark Plugs
What are the top-rated 1997 Oldsmobile Regency Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1997 Oldsmobile Regency based on customer reviews/ratings are:
from
$5.99
(90)
PT16TT Platinum TT Spark Plug
“I purchased the parts required to tune up a 89 Ford Mustang. The auto runs much better since installing the parts purchased from Advanced .”
