1997 Oldsmobile Regency Brake Parts
Find Your Specific 1997 Oldsmobile Regency Brake Parts
Below you will find various in-demand Oldsmobile Brake Parts, components and accessories for your 1997 Regency. Advance Auto Parts has popular Regency parts like Brake Kits, Brake Rotors and Drums, Brake Calipers and more. You’ll also find aftermarket and OEM Brake Parts for other Regency model years including
1998 and more. Select a category of 1997 Oldsmobile Regency Brake Parts below and start saving instantly.
Popular 1997 Oldsmobile Regency Brake Parts Categories
Essential Brake Parts for 1997 Oldsmobile Regencies
Carquest Premium – Disc Brake Caliper with Bracket (Part No.18-B4719B)
from
$101.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Carquest Premium – Multi-Use Connector (Part No.PTA1089)
from
$33.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)
from
$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Carquest Wearever – Brake Drum: Meets or Exceeds OE Specs (Part No.YH140451)
from
$63.99
Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Proper harmonic design and balance helps to reduce brake noise and vibration
- Optimal metallurgy and casting thickness to preventing warping
Carquest Premium – Disc Brake Caliper (Part No.18-4600)
from
$57.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-74802)
from
$117.99
Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- New mounting nuts and washers ensure proper, hassle-free installation.
- All units are 100 percent tested to ensure reliable performance.
- Guaranteed fit and function.
- Meets or exceeds O.E. performance.
Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2628)
from
$12.49
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the Life Span and Improves the Performance of the Drum Brakes
- Manufactured with quality materials to suppress high stress levels
- Corrosion resistant coating for long-lasting durability against harsh roads
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5053)
from
$23.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8209A)
from
$7.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Prevents noise and premature wear
- Provides longer brake life and performance
Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front (Part No.PXD623H)
from
$72.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Wearever – Remanufactured Brake Master Cylinder (Part No.10-2714)
from
$35.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – Brake Shoes (Part No.S636)
from
$49.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380261)
from
$29.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Dorman – Clip Nut – Wide Panel – No. 8 X 3/8 In, Panel Range .025 In – .125 In (sold by each) (Part No.700-520)
from
$0.71
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Dorman – Help – Brake Hose Washer – ID 10.3mm, OD 16.91mm, Thickness 1.2mm (Part No.66223)
from
$6.49
This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Power Brake Booster Vacuum Check Valve Kit with Check Valve and Grommet (Part No.179-1266)
from
$40.99
The ACDelco GM Original Equipment Power Brake Booster Check Valve functions as a one-way valve that ensures air does not enter the vacuum booster when the engine is turned off or if there is a leak in the vacuum hose, and is a GM-recommended replacement for your vehicle’s original components. This power brake booster check valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured with GM Original Equipment specification for fit, form, and function
GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2830)
from
$48.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Gray Multi-Purpose Pigtail (Part No.PT1798)
from
$62.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Multi-Purpose Relay (Part No.83A1013)
from
$17.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Wearever – Parking Brake Cable (Part No.BCA93906)
from
$27.99
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
- Quality design – inner cables are sheathed and lubricated to provide improved durability
- Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
- Tough materials – zinc-plated fittings prevent corrosion
Dorman – Help – Master Cylinder Caps (Part No.42042)
from
$9.99
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Master Cylinder Gasket (Part No.42072)
from
$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141868)
from
$87.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time.
Brembo – Premium Coated Vented Brake Rotor (Part No.09.7376.11)
from
$99.99
Brembo’s UV Coated rotors are developed as direct replacement that meets or exceeds OEM specifications. Environmentally friendly, the solvent free UV coating offers superior protection of the disc, including braking plate surfaces. High Carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included with the UV Coated rotors is a fixing screw kit with all the necessary hardware for simple and worry free installation. New intelligent marking location show part number & the minimum thickness. In order to optimize and restore braking performance rotors and pads should be replaced together. Pair your UV Coated rotor with Brembo¿s NAO/Ceramic or Low Met brake pad formulations. Brembo, the most trusted brand in braking.
Product Features:
See More
Product Features:
- UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
- Supplied with necessary fixing hardware
- Total control over the entire process
Carquest Wearever – WHEEL CYLINDER (Part No.WCA37677)
from
$22.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
- Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
- Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
- Recommended replacement is suggested when servicing drum brake
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Dorman – Help – Brake Line Retaining Clips (Part No.13987)
from
$10.99
This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 1997 Oldsmobile Regency with Top-Quality Brake Parts
When it comes to maintaining or upgrading your 1997 Oldsmobile Regency, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Brake Parts are key to keeping your Regency functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Brake Parts for the 1997 Oldsmobile Regency, designed to meet your needs without breaking the bank.
From
Brake Kit
replacements to
Brake Rotors and Drums
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1997 Oldsmobile Regency at great prices.
Our Brake Parts inventory for this model
ranges from just $0.71 to $117.99, with
an average price of $38.40.
Our 51 Brake Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1997 Oldsmobile Regency without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Oldsmobile Regency, we stock popular OEM and aftermarket Brake Parts from top names
like Carquest Professional, Carquest, Carquest Premium, and more.
Carquest Professional Brake Parts
start at just $36.99 and boast an impressive 4.5 stars average rating from customers.
Carquest and Carquest Premium also bring quality to the table, with Brake Parts available starting at $7.79, and at an average 4.4 stars rating.
With 603 customer reviews and counting, our 1997 Oldsmobile Regency Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1997 Oldsmobile Regency is always ready to roll. We’re committed to providing you with everything you need to keep your Regency in top shape, all in one place.
Start shopping confidently below for your 1997 Oldsmobile Regency!
Best-Selling Brake Kits for 1997 Oldsmobile Regencies
Enhance the driving experience in your Oldsmobile with 4 quality Brake Kit components, starting at $7.79.
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8209A)
from
$7.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Prevents noise and premature wear
- Provides longer brake life and performance
Carquest Wearever – Drum Brake Hardware Kit (Part No.7203)
from
$7.99
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Contains all the necessary hardware for easy installation
- Manufactured to restrain high tolerances with quality materials
- Helps deliver a quieter, more efficient braking system
- Restores brakes to like-new performance
Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2628)
from
$12.49
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the Life Span and Improves the Performance of the Drum Brakes
- Manufactured with quality materials to suppress high stress levels
- Corrosion resistant coating for long-lasting durability against harsh roads
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)
from
$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Most Popular 1997 Oldsmobile Regency Brake Rotors and Drums
Customize your Oldsmobile with 2 Brake Rotors and Drums products
like Front Brake Rotors and
Rear Brake Drums, all
priced under $87.99.
Carquest Wearever – Brake Drum: Meets or Exceeds OE Specs (Part No.YH140451)
from
$63.99
Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Proper harmonic design and balance helps to reduce brake noise and vibration
- Optimal metallurgy and casting thickness to preventing warping
Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141868)
from
$87.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time.
Top Picks for 1997 Oldsmobile Regency Brake Calipers
Upgrade Oldsmobile Regencies with top-quality Brake Calipers parts, including 5 OEM and aftermarket selections for your 1997 model.
Carquest Premium – Disc Brake Caliper (Part No.18-4601)
from
$57.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Carquest Premium – Disc Brake Caliper with Bracket (Part No.18-B4718B)
from
$101.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Carquest Premium – Disc Brake Caliper (Part No.18-4600)
from
$57.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Carquest Premium – Disc Brake Caliper with Bracket (Part No.18-B4719B)
from
$101.99
Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- Brackets included where required for complete system restoration
- OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
- New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- Stainless steel pad abutment hardware included when applicable
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5053)
from
$23.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
In-Demand Brake Pads and Shoes for 1997 Oldsmobile Regencies
Select from 9 premium Brake Pads and Shoes parts for your 1997 Oldsmobile Regency, with prices ranging from $10.99 to $72.99.
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet – Front (Part No.PMD623H)
from
$36.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes. Carquest Brakes also offers technical support at 1-833-BRAKE HQ (833-272-5347) for help with product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
Carquest Standard – Brake Pads: Semi-metallic, Reliable and Dependable Stopping – Front (Part No.MKD623)
from
$51.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front (Part No.PXD623H)
from
$72.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Brake Shoes (Part No.S636)
from
$49.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Premium Gold – Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet – Front (Part No.GMKD623)
from
$71.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance. Carquest Brakes also offers technical support at 1-833-BRAKE HQ (833-272-5347) for help with product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Economy – Semi-Metallic Brake Pads – Front (4-Pad Set) – Front (Part No.EMKD 623)
from
$10.99
Economy brake pads are replacement brake pads at a low price. Semi-metallic and/or Organic options are available.
Product Features:
See More
Product Features:
- Reliable stopping power
- Shims or hardware not included
- 1 year warranty
PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware – Front (Part No.17-623)
from
$71.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.
Product Features:
See More
Product Features:
- PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
- Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
- The pad surfaces are thermal scorched for fast break-in
- Includes premium stainless-steel hardware for hassle free installation
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium hardware for easy installation
PowerStop – Z16 Low-Dust Ceramic Brake Pads – Front (Part No.16-623)
from
$66.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
Goodyear Brakes – Semi-Metallic Brake Pads (Part No.GYD623)
from
$39.49
Product Features:
See More
- Braid Shim Technology – We use a patented Vulcan Braid Shim technology to eliminate noise and provide a more comfortable ride. Slots and Chamfers that match OE specifications are used to reduce vibration and brake fade
- Prolong The Life of Your Disc Brakes – The brake pads are treated with a powder-coated finish for increased weather and corrosion protection. Combined with the semi-metallic material, the pads have a higher temperature tolerance and produce less brake dus
- The Best of Safety and Durability – Goodyear Brakes is committed to passenger’s safety. These semi-metallic brake pads will provide your car with maximum stopping power and consistently even braking
- Hardware Kit Included – Each set of brake pads includes a premium hardware kit for easy installation.
Most Sold 1997 Oldsmobile Regency Brake Hoses
Explore our best-selling Oldsmobile parts for the 1997 Regency among 6 OEM and aftermarket options starting from $2.29.
Dorman – Help – Brake Hose Washer – ID 10.3mm, OD 16.91mm, Thickness 1.2mm (Part No.66223)
from
$6.49
This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380261)
from
$29.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380271)
from
$28.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Dorman – Help – Brake Line Retaining Clips (Part No.13987)
from
$10.99
This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)
from
$2.29
This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38951)
from
$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Top-Rated Brake Parts Brands For Your 1997 Oldsmobile Regency
Shop for the best-rated brands offering Brake Parts and other products for your 1997 Oldsmobile Regencies. Below you’ll find some of our best rated Brake Parts from Carquest Professional, Carquest, and Carquest Premium, and more. Brake Parts from these brands that fit a 1997 Regency start at just $7.79 and are rated as high as 4.5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Professional 1997 Oldsmobile Regency Brake Parts
When it comes to maintaining or upgrading your 1997 Oldsmobile Regency, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest Professional ticks all of those boxes. We offer a wide selection of Carquest Professional Brake Parts, specifically designed for the 1997 Oldsmobile Regency. With over 2 Carquest Professional brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.99, with an average price of just $54.99. Plus, with over 16 customer reviews and an average rating of 4.5 stars, you can trust that our Carquest Professional Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.99
(1)
Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet – Front
“Brakes went on perfect on my 1998 Pontiac Bonneville. The brakes come with caliber grease and the replacement rubber caliber sleeves.”
from
$72.99
(15)
Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front
“Good item with fair price!”
Popular Carquest 1997 Oldsmobile Regency Brake Parts
Carquest auto parts is one of the highest quality Brake Part brands in the market. Any 1997 Oldsmobile Regency owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 1997 Regency, Advance Auto Parts carries a full inventory of 3 Carquest Brake Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Carquest Brake Parts range from $7.79 to $92.99, plus, with more than 28 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.
FAQs for 1997 Oldsmobile Regency Brake Parts
Which Brake Parts are best-sellers for 1997 Oldsmobile Regencies?
Out of 51 Brake Parts that fit 1997 Oldsmobile Regencies, the following parts are the top sellers:
- WHEEL CYLINDER (3640426) – $22.99
- Brake Hose Washer – ID 10.3mm, OD 16.91mm, Thickness 1.2mm (5706386) – $6.49
- Master Cylinder Caps (17190278) – $9.99
What’s the price range for 1997 Oldsmobile Regency Brake Parts?
Brake Part prices for the 1997 Oldsmobile Regency start at $0.71 and go up to $117.99 for the most premium parts.
What’s the average price of a Brake Part for a 1997 Oldsmobile Regency?
The average price for Brake Parts for the 1997 Oldsmobile Regency is $38.40. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Brake Parts for my 1997 Oldsmobile Regency?
The cheapest 1997 Oldsmobile Regency Brake Parts we carry in stock are:
- Clip Nut – Wide Panel – No. 8 X 3/8 In, Panel Range .025 In – .125 In (sold by each) (22141620) – $0.71
- Banjo Bolt Washer 10.3mm X 16.9mm (22972282) – $2.29
- Brake Hose Washer – ID 10.3mm, OD 16.91mm, Thickness 1.2mm (5706386) – $6.49
- Disc Brake Caliper Guide Pin Boot Kit (3552985) – $7.79
- Drum Brake Hardware Kit (3551040) – $7.99
What are the top-rated Brake Parts that fit the 1997 Oldsmobile Regency?
Out of 603 reviews by customers, our 1997 Oldsmobile Regency Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1997 Oldsmobile Regency and their top-rated products:
- Brake Pads and Shoes
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet – Front (10866450) – $36.99
- Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front (10146126) – $72.99
- Brake Pads: Semi-metallic, Reliable and Dependable Stopping – Front (5590264) – $51.99
- Brake Rotors and Drums
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet – Front (10866450) – $36.99
- Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front (10146126) – $72.99
- Brake Pads: Semi-metallic, Reliable and Dependable Stopping – Front (5590264) – $51.99
- Wheel Cylinders
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet – Front (10866450) – $36.99
- Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Front (10146126) – $72.99
- Brake Pads: Semi-metallic, Reliable and Dependable Stopping – Front (5590264) – $51.99
What types of Brake Parts do you sell for my 1997 Oldsmobile Regency?
As of 11/2/25, these are some of the most in-demand types of Brake Parts for a 1997 Oldsmobile Regency:
Can I get help with 1997 Oldsmobile Regency Brake Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Brake Parts and more.
What is your return policy for Oldsmobile Regency Brake Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Regency Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
