1997 Nissan Pickup Drive Shafts and Axles
More 1997 Nissan Pickup Drive Shafts and Axles
Find your specific 1997 Nissan Pickup original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 Nissan Pickup Drive Shafts and Axles
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8474)
from
$101.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to INFINITI 90-12; NISSAN 82-04;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1982-2012
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- WITH BEARING
- CUSHION INSERT ONLY
- WITHOUT FRAME
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8473)
from
$95.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to NISSAN 86-04;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1986-2004
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- WITH BEARING
- CUSHION INSERT ONLY
- WITHOUT FRAME
NOK – Wheel Seal (Part No.K801088662NOK)
from
$12.14
Wheel Seal
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53128)
from
$171.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53072)
from
$161.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.High moly CV joint grease with stainless-steel boot bands
See More
Dorman – OE Solutions Drive Shaft Assembly (Part No.K1000315633DOR)
from
$797.90
A highly cost-effective, innovative repair solution, Dorman’s Driveshaft Assembly is engineered with a serviceable universal joint. When the u-joint fails, as is common with normal use, simply replace the u-joint – rather than replacing the entire assembly.
Product Features:
See More
Product Features:
- Dorman-engineered from 100% new materials and rigorously tested for long-lasting durability
- Coated for extended resistance to rust and corrosion
- Dorman Drop Ship Drive Shafts are made, balanced and tested in the USA
- Direct replacement for a proper fit
Dorman – Rear Drive Shaft (Part No.946-267)
from
$795.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft (Part No.946-254)
from
$531.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Serrated Wheel Stud (Part No.O8060832868DOR)
from
$3.32
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Corrosion resistant
- Double-ended studs as well as serrated bolts, and wheel bolts available
- Over-length and under-length studs available for convenience and ease of installation
Driveworks – Wheel Bearing (Part No.S-RW-114-R)
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Timken – Driveshaft Support with Bearing (Part No.K1030153165TIM)
from
$203.69
The Timken Driveshaft Support is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
SKF – Driveshaft Support with Bearing (Part No.K1030153167SKF)
from
$207.39
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
National – Multi Purpose Bearing (Part No.HB-6)
from
$115.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1997 Nissan Pickup Drive Shafts and Axles Categories
1997 Nissan Pickup Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1997 Nissan Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 20 different Drive Shafts and Axles in our inventory ranging from $3.32 to $797.90. That means you can find the exact parts or products you need to keep that 1997 Nissan Pickup running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Nissan Pickup. National, Spicer, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1997 Nissan Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1997 Nissan Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1997 Nissan Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Nissan Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Spicer Drive Shafts and Axles
We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1997 Nissan Pickup, our most popular Spicer Drive Shafts and Axles include:
Top 1997 Nissan Pickup Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1997 Nissan Pickup. Popular National parts include:
FAQs for 1997 Nissan Pickup Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1997 Nissan Pickup?
Out of 20 Drive Shafts and Axles for the 1997 Nissan Pickup, the most popular in our inventory are:
