1997 Mercury Mountaineer Performance and Racing Products
Find Your Specific 1997 Mercury Mountaineer Performance and Racing Products
Below you will find various in-demand Mercury Performance and Racing Products, components and accessories for your 1997 Mountaineer. Advance Auto Parts has popular Mountaineer parts like Performance Suspension Products, Performance Ignition Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mountaineer model years including
2002,
2003,
2004,
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 1997 Mercury Mountaineer Performance and Racing Products below and start saving instantly.
Popular 1997 Mercury Mountaineer Performance and Racing Products Categories
Essential Performance and Racing Products for 1997 Mercury Mountaineers
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$34.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Mallory – Distributor Wiring Harness (Part No.29349)
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)
from
$141.99
Product Features:
See More
- Use W/ Valve Springs Part #5722, 5796
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Energy Suspension – Control Arm Bushing Set (Part No.4.3157R)
from
$103.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.4.3157G)
from
$103.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Hays – Flywheels (Part No.12-535)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)
from
$221.99
Product Features:
See More
- Case-Hardened Tubing
- Surface Hardening
- Welded Ends
- 0.3125 in. Diameter
- Use with or without Hardened Steel Guideplates
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Motive Gear – Performance Differential Ring and Pinion (Part No.F888488)
Motive Gear – Performance Differential Ring and Pinion (Part No.F888514)
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)
from
$399.99
The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.
Product Features:
See More
Product Features:
- Optimized engine tuning
- Adjustable rev limiter/speed limiter
- Speedometer correction for multiple tire sizes and gear ration changes
- Adjustable shift firmness and shift points
- Throttle adjustments
- Cooling fan on/off temperatures
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
SCT Performance – Livewire TS Plus Performance Programmer and Monitor (Part No.5015P)
from
$599.99
The Livewire TS+ unlocks your vehicle’s hidden performance by re-calibrating your vehicle’s computer for maximum horsepower & torque, increased throttle response, firmer shifts, and even increased fuel mileage. The LiveWire TS+ arrives preloaded with Dyno-proven performance tune files and holds up to 10 custom tuning files for tune flexibility. Access it all on the customizable touch screen.
Product Features:
See More
Product Features:
- Using the 4″ touchscreen, track critical performance data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Product might not be available in all states due to local laws.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)
from
$27.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.
Product Features:
See More
Product Features:
- Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
- Advanced Bobbin Technology
- Direct Plug In Replacement results in a Direct OE Fit
- OBD ll Safe, so you won’t be throwing codes, just sparks
- Standard Motor Products SMP Fd-503
- MSD 8242 82428
- Resists Shock And Vibration
- Resists Corrosion
Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)
from
$126.99
Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Fd-487
- MSD 8241
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
B & M – Shift Improver Kit (Part No.40266)
from
$199.99
Shift Improver Kit – 1996 to 1999 Ford, Lincoln, Mercury 4R70W Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible shift.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Upgrade your 1997 Mercury Mountaineer with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1997 Mercury Mountaineer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Performance and Racing Products are key to keeping your Mountaineer functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Performance and Racing Products for the 1997 Mercury Mountaineer, designed to meet your needs without breaking the bank.
From
Performance Suspension Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1997 Mercury Mountaineer at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.99 to $621.99, with
an average price of $165.43.
Our 50 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1997 Mercury Mountaineer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Mercury Mountaineer, we stock popular OEM and aftermarket Performance and Racing Products from top names
like SCT Performance, Mallory, FEL-PRO Performance, and more.
SCT Performance Performance and Racing Products
start at just $399.99 and boast an impressive 5.0 stars average rating from customers.
Mallory and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $35.99, and at an average 4.9 stars rating.
With 114 customer reviews and counting, our 1997 Mercury Mountaineer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1997 Mercury Mountaineer is always ready to roll. We’re committed to providing you with everything you need to keep your Mountaineer in top shape, all in one place.
Start shopping confidently below for your 1997 Mercury Mountaineer!
Best-Selling Performance Suspension Products for 1997 Mercury Mountaineers
Enhance the driving experience in your Mercury with 2 quality Performance Suspension Product components, starting at $103.99.
Energy Suspension – Control Arm Bushing Set (Part No.4.3157R)
from
$103.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.4.3157G)
from
$103.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Most Popular 1997 Mercury Mountaineer Performance Ignition Products
Customize your Mercury with 4 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $199.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)
from
$126.99
Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Fd-487
- MSD 8241
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1997 Mercury Mountaineer Performance Exhaust Products
Upgrade Mercury Mountaineers with top-quality Performance Exhaust Products parts, including 4 OEM and aftermarket selections for your 1997 model.
Mr. Gasket – Mls Exhaust Gasket (Part No.4825G)
from
$33.99
Multi-Layered Steel (MLS) exhaust gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Product Features:
See More
Product Features:
- Designed for extreme cylinder pressures by high horsepower-high compression turbocharged, supercharged and nitrous oxide injected engines
- Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention
- Stress formed inner and outer layer embossments act like springs that rebound under flange clamp load, creating force to seal extreme pressures
- Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials
- Total gasket thickness .075 inch
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Product Features:
See More
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
In-Demand Performance Engines for 1997 Mercury Mountaineers
Select from 29 premium Performance Engines parts for your 1997 Mercury Mountaineer, with prices ranging from $7.99 to $621.99.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)
from
$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
- Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
- Not intended for use in emission controlled vehicles.
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$34.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – ENGINE ROCKER ARM (Part No.19049-16)
from
$621.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.19048-16)
from
$582.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.19044-16)
from
$481.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17045-16)
from
$301.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17044-16)
from
$277.99
ENGINE ROCKER ARM
Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)
from
$221.99
Product Features:
See More
- Case-Hardened Tubing
- Surface Hardening
- Welded Ends
- 0.3125 in. Diameter
- Use with or without Hardened Steel Guideplates
Competition Cams – HIGH ENRGY ALUM ROCK (Part No.17044-8)
from
$148.99
HIGH ENRGY ALUM ROCK
Competition Cams – HIGH ENERGY ALUM ROC (Part No.17043-8)
from
$148.99
HIGH ENERGY ALUM ROC
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)
from
$141.99
Product Features:
See More
- Use W/ Valve Springs Part #5722, 5796
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Competition Cams – ENGINE ROCKER ARM (Part No.19049-1)
from
$59.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.19048-1)
from
$56.99
ENGINE ROCKER ARM
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Competition Cams – ENGINE ROCKER ARM (Part No.19044-1)
from
$46.49
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.19043-1)
from
$46.49
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17045-1)
from
$29.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17043-1)
from
$27.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17044-1)
from
$27.99
ENGINE ROCKER ARM
Competition Cams – Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (Part No.4818-8)
from
$24.99
Flat 1 Piece Guide Plate Set for Ford 289-351W with 3/8" Pushrod and 7/16" Stud
Most Sold 1997 Mercury Mountaineer Performance Oil Filters
Explore our best-selling Mercury parts for the 1997 Mountaineer among 1 OEM and aftermarket options starting from $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Top-Rated Performance and Racing Products Brands For Your 1997 Mercury Mountaineer
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1997 Mercury Mountaineers. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, Mallory, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1997 Mountaineer start at just $35.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular SCT Performance 1997 Mercury Mountaineer Performance and Racing Products
When it comes to maintaining or upgrading your 1997 Mercury Mountaineer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 1997 Mercury Mountaineer. With over 2 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99, with an average price of just $499.99. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$599.99
(1)
Livewire TS Plus Performance Programmer and Monitor
“I bought it for my f350 2008 6.4 and it worked perfectly”
from
$399.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
Popular Mallory 1997 Mercury Mountaineer Performance and Racing Products
Mallory auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1997 Mercury Mountaineer owner should feel confident when installing genuine Mallory parts in their vehicle. To ensure the best fit and performance for your 1997 Mountaineer, Advance Auto Parts carries a full inventory of 1 Mallory Performance and Racing Products. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Mallory Performance and Racing Products range up to $92.99, plus, with more than 3 customer reviews and an impressive 4.9 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
FAQs for 1997 Mercury Mountaineer Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1997 Mercury Mountaineers?
Out of 50 Performance and Racing Products that fit 1997 Mercury Mountaineers, the following parts are the top sellers:
- Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99
- Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $399.99
- Engine Valve Cover Gasket Set (20688709) – $50.99
What’s the price range for 1997 Mercury Mountaineer Performance and Racing Products?
Performance and Racing Product prices for the 1997 Mercury Mountaineer start at $7.99 and go up to $621.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1997 Mercury Mountaineer?
The average price for Performance and Racing Products for the 1997 Mercury Mountaineer is $165.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Mercury Mountaineer model years?
What are the cheapest Performance and Racing Products for my 1997 Mercury Mountaineer?
The cheapest 1997 Mercury Mountaineer Performance and Racing Products we carry in stock are:
- Flat 1 Piece Guide Plate for Ford 289-351W with 5/16" Pushrod and 7/16" Stud (50288902) – $7.99
- Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (50288866) – $8.99
- Flat 2 Piece Adjustable Guide Plate for SBC/289-351W with 5/16" Pushrod 7/16" Stud (50288033) – $14.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99
- Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod (50289820) – $18.99
What are the top-rated Performance and Racing Products that fit the 1997 Mercury Mountaineer?
Out of 114 reviews by customers, our 1997 Mercury Mountaineer Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1997 Mercury Mountaineer and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Ford 4-Twr.Dis Supercoil Pack (22904363) – $126.99
- Performance Oil Filters
- Unilite Ignition Module (17350025) – $92.99
- Ford 4-Twr.Dis Supercoil Pack (22904363) – $126.99
- Programmers
- Unilite Ignition Module (17350025) – $92.99
- Ford 4-Twr.Dis Supercoil Pack (22904363) – $126.99
What types of Performance and Racing Products do you sell for my 1997 Mercury Mountaineer?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1997 Mercury Mountaineer:
Can I get help with 1997 Mercury Mountaineer Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Performance and Racing Products and more.
What is your return policy for Mercury Mountaineer Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Mercury Mountaineer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
