1997 Mazda Protege Engine Parts

Below you will find various in-demand Mazda Engine Parts, components and accessories for your 1997 Protege. Advance Auto Parts has popular Protege parts like Engine Mounts, Engine Timing Parts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Protege model years including 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003 and more. Select a category of 1997 Mazda Protege Engine Parts below and start saving instantly.

Popular 1997 Mazda Protege Engine Parts Categories

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Engine Crankshaft Kits

Harmonic Balancers

Cylinder Head Gasket Sets

Timing Idlers

Engine Mounts

Timing Belt Jobs

Engine Oil Cooler Accessories

Computer Control Relays

Engine Timing Belt Kit without Water Pumps

Cylinder Head Gaskets

Crankshaft Seals

Timing Belts

Timing Belt Tensioners

Oil Caps

Engine Coolant Pipe Gaskets

Timing Chain Tensioners

Timing Cover Seals

Timing Cover Plugs

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Lower Gasket Sets

Engine Oil Galley Plugs

Camshaft Seals

Expansion Plugs

Engine Timing Belt Tensioner Pulleys

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Camshaft Lubes

Engine Oil Pump Primers

Essential Engine Parts for 1997 Mazda Proteges

from

$1.32

Seal Ring

from

$43.95

The GMB Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$67.97

The ContiTech Timing Belt meets or exceeds the manufacturer s specifications for durability, fit and quality. The ContiTech Synchrobelt timing belt is resistant to high temperatures, oil resistant, provides low noise and reliable operation.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.

from

$32.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$3339.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$70.59

The GMB Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$144.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

from

$804.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$121.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated ring face
Increases wear resistance in dirty air conditions
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$166.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$6.99

Made In USA. 4 OZ Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$137.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
Durable construction – stringent specifications and careful construction help ensure longevity.
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.89

Oil Pan Gasket

from

$7.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Supplied with metal gasket
Coated for rust protection
Made from premium materials for durability
Application specific for this vehicle

from

$202.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$5.72

Camshaft Seal

from

$46.99

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$17.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$60.27

GMB is one of the world’s largest designers and manufacturers of automotive service products. GMB offers OE quality water pumps, universal joints, tensioner idler bearings and chassis parts for most European, Asian and Domestic vehicles.

from

$1.49

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$142.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.

from

$289.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$23.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$39.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MAZDA 99-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2001
Weight approx: 3 Lbs

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

Upgrade your 1997 Mazda Protege with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1997 Mazda Protege, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Engine Parts are key to keeping your Protege functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Engine Parts for the 1997 Mazda Protege, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1997 Mazda Protege at great prices. Our Engine Parts inventory for this model ranges from just $1.29 to $3,339.99, with an average price of $96.04. Our 94 Engine Parts in stock come from 35 trusted brands, so you’re sure to find the right part for your 1997 Mazda Protege without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Mazda Protege, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dayco, National, and more. FELPRO Engine Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. Dayco and National also bring quality to the table, with Engine Parts available starting at $8.29, and at an average 5 stars rating. With 2,399 customer reviews and counting, our 1997 Mazda Protege Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Mazda Protege is always ready to roll. We’re committed to providing you with everything you need to keep your Protege in top shape, all in one place. Start shopping confidently below for your 1997 Mazda Protege!

Best-Selling Engine Mounts for 1997 Mazda Proteges

Enhance the driving experience in your Mazda with 4 quality Engine Mount components, starting at $28.99.

show more show less

from

$31.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MAZDA 95-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1995-1998
Weight approx: 2 Lbs
PART GROUP: 8513, 9069

from

$28.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MAZDA 95-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1995-1998
Weight approx: 3 Lbs
PART GROUP: 8513, 9069

from

$62.66

Engine Mount

from

$44.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MAZDA 95-98;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1995-1998
Weight approx: 4 Lbs
PART GROUP: 8063, 8740

Most Popular 1997 Mazda Protege Engine Timing Parts

Customize your Mazda with 18 Engine Timing Parts products like Timing Belts, Timing Belt Jobs, and Timing Cover Seals, all priced under $108.82.

show more show less

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$107.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$38.49

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$15.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$50.11

from

$3.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$67.97

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.

from

$108.82

ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.
Durable long life performance.

from

$85.99

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$60.27

from

$48.05

The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:

High-tensile strength Carbon Cord
Abrasion resistant
High elasticity, high hardness HNBR rubber
Increased durability
Reduced noise
Rubber construction for superior flexibility
Special low friction tooth fabric

from

$46.60

The Koyo Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$43.95

The GMB Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$32.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$26.30

Timing Belt

from

$25.06

The NPN Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Resistant to abrasion and heat.

from

$22.59

High-tensile strength Carbon Cord
Abrasion resistant
High elasticity, high hardness HNBR rubber
Increased durability
Reduced noise
Rubber construction for superior flexibility
Special low friction tooth fabric

Top Picks for 1997 Mazda Protege Engine Gaskets and Seals

Upgrade Mazda Proteges with top-quality Engine Gaskets and Seals parts, including 18 OEM and aftermarket selections for your 1997 model.

show more show less

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$23.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$47.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$16.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$41.15

Oil Pan Gasket

from

$20.42

OE identical sealing solutions for the aftermarket The Elwis brand is synonymous with consistently high quality, outstanding delivery performances and – most importantly – innovative sealing solutions to the automotive aftermarket. Elwis unrivalled expertise in the field of advanced sealing solution engineering and management is passed on to our automotive aftermarket customers in the form of superb pricing, reliability and performance. All Elwis parts perform at least identically to their original counterparts.

Product Features:

OE Identical quality
Outstanding delivery performance
Innovative sealing solution

from

$37.74

ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$5.30

Valve Stem Seal

from

$5.15

Oil Pan Gasket

from

$5.06

Oil Pan Gasket

from

$4.89

Oil Pan Gasket

from

$4.83

Oil Pan Gasket

from

$3.73

Valve Stem Seal

from

$3.70

Valve Stem Seal

from

$1.32

Seal Ring

In-Demand Valve Cover and Cylinder Heads for 1997 Mazda Proteges

Select from 11 premium Valve Cover and Cylinder Heads parts for your 1997 Mazda Protege, with prices ranging from $23.99 to $804.99.

show more show less

from

$46.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$83.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift

from

$48.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$122.50

ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications

from

$804.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$268.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections

from

$196.25

WARNING: This item cannot be returned for a replacement or refund if opened! Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.

Product Features:

Original equipment design and quality
Head sets give you original equipment form, fit, and function
Utilizes OE equivalent or better materials in all head sets
Packaged in shrink wrapped tray
Every part you need to complete your gasket repair in one package unless otherwise stated

from

$166.67

Cylinder Head Gasket

from

$142.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.

from

$124.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$23.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

Most Sold 1997 Mazda Protege Camshafts

Explore our best-selling Mazda parts for the 1997 Protege among 3 OEM and aftermarket options starting from $6.61.

show more show less

from

$113.99

Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$11.99

SHAFT SEAL

from

$6.61

Camshaft Seal

Top-Rated Engine Parts Brands For Your 1997 Mazda Protege

Shop for the best-rated brands offering Engine Parts and other products for your 1997 Mazda Proteges. Below you’ll find some of our best rated Engine Parts from FELPRO, Dayco, and National, and more. Engine Parts from these brands that fit a 1997 Protege start at just $8.29 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1997 Mazda Protege Engine Parts

When it comes to maintaining or upgrading your 1997 Mazda Protege, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1997 Mazda Protege. With over 14 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $56.64. Plus, with over 12 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$19.99

This product is not rated

Engine Crankshaft Seal Kit

“”

from
$47.99

This product is not rated

Engine Valve Stem Oil Seal Set

“”

from
$16.29

This product is not rated

Engine Crankshaft Seal Kit

“”

Popular Dayco 1997 Mazda Protege Engine Parts

Dayco auto parts is one of the highest quality Engine Part brands in the market. Any 1997 Mazda Protege owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1997 Protege, Advance Auto Parts carries a full inventory of 4 Dayco Engine Parts. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Dayco Engine Parts range from $38.49 to $107.99, plus, with more than 5 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$38.49

(2)

Premium Timing Belt, 45.67 Inch With 145 Round Tooth

“fit perfect”

from
$85.99

This product is not rated

Timing Belt Kit; With Belt, Tensioner, 2 Idlers And Tensioner Spring

“”

from
$107.99

(2)

Timing Belt Kit; With Belt, Tensioner, 2 Idlers And Tensioner Spring

“great product”

FAQs for 1997 Mazda Protege Engine Parts

Which Engine Parts are best-sellers for 1997 Mazda Proteges?

Out of 94 Engine Parts that fit 1997 Mazda Proteges, the following parts are the top sellers:

Engine Valve Cover Gasket Set (20688525) – $34.99
Engine Crankshaft Seal Kit (3502643) – $19.99
Engine Camshaft Seal Kit (3213560) – $14.99

What’s the price range for 1997 Mazda Protege Engine Parts?

Engine Part prices for the 1997 Mazda Protege start at $1.29 and go up to $3,339.99 for the most premium parts.

What’s the average price of a Engine Part for a 1997 Mazda Protege?

The average price for Engine Parts for the 1997 Mazda Protege is $96.04. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Mazda Protege model years?

Yes, we currently carry Engine Parts for 13 model years of Mazda Proteges between 1990 and 2003. Engine Parts are bought most frequently for the following model years: 2003, 2002, 2001, 2000, 1999, 1998, 1996, 1995, and 1994.

What are the cheapest Engine Parts for my 1997 Mazda Protege?

The cheapest 1997 Mazda Protege Engine Parts we carry in stock are:

Steel Cup Expansion Plug 30.25mm, Height 0.301 (3492605) – $1.29
Seal Ring (10793966) – $1.32
Steel Cup Expansion Plug 30.25mm, Height 0.301 (sold by each) (16140162) – $1.39
Steel Cup Expansion Plug 35.21mm, Height 0.380 (sold by each) (16140158) – $1.49
Steel Cup Expansion Plug 35.21mm, Height 0.380 (3492354) – $2.29

What are the top-rated Engine Parts that fit the 1997 Mazda Protege?

Out of 2,399 reviews by customers, our 1997 Mazda Protege Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1997 Mazda Protege and their top-rated products:

Engine Gaskets and Seals
- Engine Valve Cover Gasket Set (20688525) – $34.99
- Upper Oil Pan Gasket Set: Rubber End Seals, With Gasket Sealant, 5 Piece Set (3500314) – $23.49

What types of Engine Parts do you sell for my 1997 Mazda Protege?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 1997 Mazda Protege:

Can I get help with 1997 Mazda Protege Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Engine Parts and more.

What is your return policy for Mazda Protege Engine Parts?

Advance Auto Parts keeps returns simple. For new Mazda Protege Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Mazda Protege Engine Parts

Elring – Seal Ring (Part No.A809212362ELR)

GMB – GMB Timing Belt Tensioner (Part No.A5030111873GMB)

ContiTech – Premium Timing Belt (Part No.A5000160710CON)

Carquest Premium – Main Relay (Part No.RAA1797)

Spartan – Engine Long Block; Mazda Z5 10/97-6/98 Engine (Part No.625A)

GMB – Timing Belt Tensioner (Part No.A5030104644GMB)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40634)

Felpro – Cylinder Head Gasket Set (Part No.HS 9718 PT)

Spartan – Engine Cylinder Head; Mazda Z5 97-99 Cyl Head (Part No.2625A)

Sealed Power – Engine Piston Ring Set (Part No.E-635KC)

Melling – Stock Replacement OE Type Oil Pump (Part No.M191)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012)

Dorman – Harmonic Balancer Assembly (Part No.594-380)

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Ishino – Oil Pan Gasket (Part No.A613063527ISH)

Beck/Arnley – Oil Drain Plug (Part No.016-0088)

Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA1771)

NDK – Camshaft Seal (Part No.A808035368NDK)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-4175CP)

National – Multi Purpose Seal (Part No.2012V)

GMB – Timing Belt Idler, Upper Idler (Part No.A5291146675GMB)

Dorman – Steel Cup Expansion Plug 35.21mm, Height 0.380 (sold by each) (Part No.555-093)

National – Multi Purpose Seal (Part No.710886)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-55074-01)

Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.19860)

Sealed Power – Engine Valve Lifter (Part No.HT-2276)

Anchor – Engine Mount: Rear, 1 Piece (Part No.8886)

Felpro – Engine Conversion Gasket Set (Part No.CS 9696-1)

Anchor – Engine Mount: Rear, 1 Piece (Part No.9069)

Anchor – Engine Mount: Front, 1 Piece (Part No.8513)

Autopart International Inc – Engine Mount (Part No.A70002014027API)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.8740)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 45860)

Dayco – Timing Belt Kit; With Belt, Tensioner, 2 Idlers And Tensioner Spring (Part No.95179K1)

Dayco – Premium Timing Belt, 45.67 Inch With 145 Round Tooth (Part No.95179)

National – Multi Purpose Seal (Part No.223420)

GMB – Timing Belt Idler (Part No.A5291111874GMB)

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Dayco – Timing Component Kit; With Tensioner, Idler And 2 Tensioner Springs, 6 Piece Set (Part No.84041)

ContiTech – Premium Timing Belt (Part No.A5000160710CON)

ContiTech – Premium Timing Belt Kit (Part No.A5006112559CON)

Dayco – Timing Belt Kit; With Belt, Tensioner, 2 Idlers And Tensioner Spring (Part No.95266K1)

GMB – Timing Belt Idler, Upper Idler (Part No.A5291146675GMB)

Mitsuboshi – Mitsuboshi Timing Belt (Part No.A5000124593MBL)

Koyo – Koyo Timing Belt Tensioner (Part No.A5030117692KOY)

GMB – GMB Timing Belt Tensioner (Part No.A5030111873GMB)

National – Shaft Repair Sleeve (Part No.99145)

Autopart International Inc – Timing Belt (Part No.A50001953600API)

NPN – NPN Timing Belt (Part No.A5000124593NPN)

Mitsubishi – Mitsuboshi Timing Belt (Part No.A5000124588MBL)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50569 R)

Felpro – Upper Oil Pan Gasket Set: Rubber End Seals, With Gasket Sealant, 5 Piece Set (Part No.OS 30633 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40634)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72802)

Felpro – Oil Pan Gasket Set: Rubber End Seals, With Gasket Sealant, 4 Piece Set (Part No.OS 30631 R)

Felpro – Engine Conversion Gasket Set (Part No.CS 9696-1)

Ajusa – Oil Pan Gasket (Part No.A6130860493AJU)

Elwis – Valve Cover Gasket (Part No.A803057719ELW)

Ishino – Stone Valve Cover Gasket (Part No.A803057719ISH)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72885)

NOK – Valve Stem Seal (Part No.A807058777NOK)

Ishino – Oil Pan Gasket (Part No.A613033767ISH)

Ishino – Oil Pan Gasket (Part No.A613032033ISH)

Ishino – Oil Pan Gasket (Part No.A613063527ISH)

Ishino – Oil Pan Gasket (Part No.A613063528ISH)

Corteco – Valve Stem Seal (Part No.A8070289387CFW)

NOK – Valve Stem Seal (Part No.A807058778NOK)

Elring – Seal Ring (Part No.A809212362ELR)

MAHLE Original – Engine Cylinder Head Bolt Set (Part No.GS33556)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.9717 PT)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72846)

Ishino – Stone Cylinder Head Gasket (Part No.A8100178737ISH)

Spartan – Engine Cylinder Head; Mazda Z5 97-99 Cyl Head (Part No.2625A)

Felpro – Cylinder Head Gasket Set (Part No.HS 9717 PT-1)

Nippon Reinz – Cylinder Head Gasket Set (Part No.A8010102432NRZ)

Ishino Stone – Cylinder Head Gasket (Part No.A8010178499ISH)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-55074-01)

Felpro – Cylinder Head Gasket Set (Part No.HS 9213 PT)

Sealed Power – Engine Valve Lifter (Part No.HT-2276)