1997 GMC Yukon Transfer Cases

Essential 1997 GMC Yukon Transfer Cases

National – Multi Purpose Seal (Part No.710496)

Multi Purpose Seal

from

$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Remanufactured Transfer Case Control Module (Part No.599-108)

Remanufactured Transfer Case Control Module

from

$371.99
Dorman’s remanufactured Transfer Case Control Module is engineered from new replacement parts And renewed parts for optimal performance. It provides a high-quality, environmentally friendly alternative to buying new.

Product Features:
  • Restores the ability to shift in and out of four-wheel drive (4WD)
  • Shuts off four-wheel drive (4WD) warning light
  • Plug and play for easy, economical installation, no programming required
  • Fully remanufactured and vehicle simulator- tested for quality assurance
See More

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Taper Bearing Cup

from

$6.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Transfer Case Adapter O-Ring (Part No.926-831)

Transfer Case Adapter O-Ring

from

$12.29
This transfer case adapter seal matches the fit and function of worn or damaged original equipment part. This seal should be replaced as part any service that requires the transfer case and transmission to be separated.

Product Features:
  • Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
  • Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
  • Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dorman – Transfer Case Gasket (Part No.917-562)

Transfer Case Gasket

from

$11.99
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
  • Effective fix – restores a tight seal in the transfer case after original gasket fails
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Dorman – 4WD Switch Electric (Part No.600-502)

4WD Switch Electric

from

$23.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
  • Effective fix – restores proper 4WD operation after original switch degrades and fails
  • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

NTK – ABS Wheel Speed Sensor (Part No.VB0037)

ABS Wheel Speed Sensor

from

$34.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

Cardone – Transfer Case Motor (Part No.48-105)

Transfer Case Motor

from

$194.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
See More

EVO Driveline – Transfer Case Motor (Part No.UMM4482)

Transfer Case Motor

from

$186.99
Transfer Case Motor

Felpro – TRANSFER CASE GASKET SET (Part No.72770)

TRANSFER CASE GASKET SET

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Driveworks – Needle Bearing (Part No.S-B-2110)

Needle Bearing

from

$7.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.J-2416)

Bearings

from

$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99187)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

ACDelco – Trans Case Input Sft (Part No.J7110341646ACD)

Trans Case Input Sft

from

$107.03
Trans Case Input Sft

EVO Driveline – Remanufactured Transfer Case (Part No.UMT141-1)

Remanufactured Transfer Case

from

$1914.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

EVO Driveline – Remanufactured Transfer Case (Part No.UMT137-4)

Remanufactured Transfer Case

from

$1428.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:
  • Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
  • OEM cores are processed as individual units throughout the tear down and assembly process
  • Cores cleaned using our Hydro Blast cleaning and rinse process
  • All case halves wet sanded to ensure perfect mating surfaces
  • Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
  • Remanufactured in our ISO9001:2008 USA facility.
  • Without Motor
See More

Driveworks – Oil Seal (Part No.S-3946)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.710682)

Multi Purpose Seal

from

$49.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710645)

Multi Purpose Seal

from

$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.FC-66561)

Bearings

from

$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.341022)

Multi Purpose Seal

from

$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

1997 GMC Yukon Transfer Cases

Maybe you’re in the middle of a full rebuild of that 1997 GMC Yukon. Maybe you just need a couple of Transfer Cases. Either way, Advance Auto Parts has 50 different Transfer Cases in our inventory ranging from $4.79 to $1,489.99. That means you can find the exact parts or products you need to keep that 1997 GMC Yukon running smoothly.

Transfer Cases are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1997 GMC Yukon. Dorman, Felpro, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Transfer Cases for your 1997 GMC Yukon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 84 reviews in this category, some of the top rated parts include 4WD Switch Electric with 4.7 stars and Transfer Case Shift Motor with 4.0 stars.

So if you’re in the market for aftermarket Transfer Cases to keep your 1997 GMC Yukon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Transfer Cases Brands To Make Your 1997 GMC Yukon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 GMC Yukon demands trusted brand parts and products to keep it running. Many trusted brands of Transfer Cases make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon the best it can be. Be sure to browse some of our top Transfer Cases brands and parts.

Popular Felpro Transfer Cases

We carry Felpro parts in our stock across Transfer Case Adapter Gaskets categories, plus more. For a 1997 GMC Yukon, our most popular Felpro Transfer Cases include:
TRANSFER CASE GASKET SET
from $15.99
(4)
TRANSFER CASE GASKET SET
Transfer Case Adapter Gaskets

Top 1997 GMC Yukon Transfer Cases from National

National products are another trusted brand when it comes to Transfer Cases for your 1997 GMC Yukon. Popular National parts include:
Multi Purpose Seal
from $15.29
(20)
Multi Purpose Seal
Input Shaft Seals
Multi Purpose Seal
from $25.99
(1)
Multi Purpose Seal
Transfer Case Output Shaft Seals
Bearings
from $32.99
(1)
Bearings
Transfer Case Output Shaft Bearings

FAQs for 1997 GMC Yukon Transfer Cases

What are the most purchased Transfer Cases for the 1997 GMC Yukon?

Out of 50 Transfer Cases for the 1997 GMC Yukon, the most popular in our inventory are:
Transfer Case Gasket
from $11.99
(10)
Transfer Case Gasket
Transfer Case Gaskets
Shaft Repair Sleeve
from $41.99
(1)
Shaft Repair Sleeve
Transfer Case Output Shaft Bearings
Oil Seal
from $4.79
This product is not rated
Oil Seal
Input Shaft Seals

What are the top-rated 1997 GMC Yukon Transfer Cases?

Top-rated Transfer Cases for your 1997 GMC Yukon based on customer reviews/ratings are:
4WD Switch Electric
from $23.99
(3)
4WD Switch Electric
“This is cheap and easy to replace and in my case fixed my 4wd issue. Be sure to check your actuator first by giving power ground maybe by the battery ”
Transfer Case Shift Motor
from $189.99
(2)
Transfer Case Shift Motor
“Exact fit and connected correctly. Instructions were wrong about motor position being in 2 high. Had to put transfer case in 4 high to install. Other ”