1997 GMC Sonoma Differentials

Essential 1997 GMC Sonoma Differentials

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-111)

Rear Axle Shaft, Left or Right

from

$184.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

Yukon Gear – Minor Install Kit For GM Early And Late 7.5" Differential (Part No.12050)

Minor Install Kit For GM Early And Late 7.5" Differential

from

$115.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits GM 7.5″ and 7.625″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Pro-King – Differential Internal Nest Kit (Part No.741A717A)

Differential Internal Nest Kit

from

$155.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Carrier (Part No.GM8.6L)

Differential Carrier

from

$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

SKF – Pinion Seal (Part No.J7010204334SKF)

Pinion Seal

from

$19.62
Pinion Seal

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)

Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM

from

$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.

Product Features:
  • Cross pin shaft
  • Fits GM 8.5″
  • Chromoly steel for added strength
See More

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88648)

Tapered Roller Bearing

from

$14.29
Product Features:
  • Brand may vary by location
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Yukon Gear – 7.2" Shifter Seal (Part No.30280)

7.2" Shifter Seal

from

$28.99
7.2″ shifter seal.Yukon Mighty seal.

Product Features:
  • Shifter seal
  • Fits GM 7.2″ IFS
See More

National – Shaft Repair Sleeve (Part No.99152)

Shaft Repair Sleeve

from

$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

8.2" & 8.5" Rear Cover Gasket

from

$10.99
8.2″ & 8.5″ rear cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.2″, 8.5″ and 8.6″
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

from

$15.99
Product Features:
  • Carrier shim kit for Dana Spicer 30 with 30 spline axles
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" With 28 Spline Axles (Part No.26015)

Dura Grip Positraction For GM 8.5" With 28 Spline Axles

from

$859.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

MTC – Differential Drain P (Part No.J7065587755MTC)

Differential Drain P

from

$12.52
Differential Drain P

Yukon Gear – Aluminum Girdle Cover For GM 7.5" & 7.625" (Part No.32118)

Aluminum Girdle Cover For GM 7.5" & 7.625"

from

$379.99
Product Features:
  • Fits GM 7.5″ and 7.625″
  • Aluminum girdle cover
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

    Clutch Guide For GM 7.5" & 7.6" Dura Grip

    from

    $10.99
    Product Features:
    • Clutch guide
    • Fits GM 7.5″ and 7.625″ Dura Grip
    See More

    Yukon Gear – Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline (Part No.16116)

    Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline

    from

    $279.99
    Yukon spider gear set for GM 7.5″ & 7.625″ Dura Grip posi, 26 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

    Product Features:
    • Spider gear kit
    • Fits GM gm 7.5″ with 26 spline Dura Grip positraction
    • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Yukon Gear – Bearing Install Kit For ’81 And Newer GM 7.5" Differential (Part No.11062)

    Bearing Install Kit For '81 And Newer GM 7.5" Differential

    from

    $239.99
    Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

    Product Features:
    • Fits 1982-1999 GM 7.5″ and 7.625″
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
    See More

    USA Standard Gear – Bearing Kit For ’99-’08 GM 8.6" (Part No.58012)

    Bearing Kit For '99-'08 GM 8.6"

    from

    $151.99
    This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and br

    Product Features:
    • Fits 1999-2008 GM 8.6″
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
    See More

    Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

    Pinion Install Kit For GM 8.5" Differential

    from

    $173.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 8.5″ rear
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Pinion Install Kit For GM 7.5" Differential (Part No.13064)

    Pinion Install Kit For GM 7.5" Differential

    from

    $203.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1982-1999 GM 7.5″ and 7.625″
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    1997 GMC Sonoma Differentials

    Maybe you’re in the middle of a full rebuild of that 1997 GMC Sonoma. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 337 different Differentials in our inventory ranging from $1.99 to $1,839.99. That means you can find the exact parts or products you need to keep that 1997 GMC Sonoma running smoothly.

    Differentials are only as good as their brand. We stock 23 different brands to make sure you have plenty of trusted parts to choose from for your 1997 GMC Sonoma. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1997 GMC Sonoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,057 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 4.9 stars and Rear Differential Cover with 4.5 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1997 GMC Sonoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1997 GMC Sonoma Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 GMC Sonoma demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Sonoma the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1997 GMC Sonoma Differentials

    What are the most purchased Differentials for the 1997 GMC Sonoma?

    Out of 337 Differentials for the 1997 GMC Sonoma, the most popular in our inventory are:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Taper Bearing Set
    from $10.79
    (33)
    Taper Bearing Set
    Differential Bearings

    What are the top-rated 1997 GMC Sonoma Differentials?

    Top-rated Differentials for your 1997 GMC Sonoma based on customer reviews/ratings are:
    DIFFERENTIAL GASKET
    from $7.99
    (45)
    DIFFERENTIAL GASKET
    “Some say no need for a gasket and to use gasket sealer only its just as good. I like to make sure that the cover is installed properly to avoid any l”
    Rear Differential Cover
    from $20.99
    (38)
    Rear Differential Cover
    “Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
    Rear Differential Cover
    from $32.99
    (14)
    Rear Differential Cover
    “Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”