1997 GMC K3500 Drive Shafts and Axles

More 1997 GMC K3500 Drive Shafts and Axles

Find your specific 1997 GMC K3500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1997 GMC K3500 Drive Shafts and Axles

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More
View Product

Yukon Gear – Thrust Washer For GM 9.25" IFS Stub Shaft (Part No.33525)

Thrust Washer For GM 9.25" IFS Stub Shaft

from

$41.99
Product Features:
  • Stub shaft thrust washer
  • Fits GM 9.25″ IFS
See More
View Product

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

(1 reviews)
View Product

Yukon Gear – Replacement Inner Axle Seal For Dana 60 Front (Part No.30082)

Replacement Inner Axle Seal For Dana 60 Front

from

$18.99
Replacement Inner axle seal for Dana 60 front.Yukon Mighty seal.

Product Features:
  • Front inner axle seal
  • Fits Dana Spicer 60 front
See More
View Product

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

(11 reviews)
View Product

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88508-AA)

Multi Purpose Bearing

from

$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(1 reviews)
View Product

National – Multi Purpose Seal (Part No.481181N)

Multi Purpose Seal

from

$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More
View Product

USA Standard Gear – Replacement Outer Stub For GM D60, 12", 35 Spline (Part No.35012)

Replacement Outer Stub For GM D60, 12", 35 Spline

from

$203.99
Product Features:
  • 35 spline
  • 12.0″ long
  • Fits Dana Spicer 60 in GM and Dodge
  • Outer stub
  • 5-332x U-joint
See More
View Product

USA Standard Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 60 & 70, 35 Spline, 12" Long (Part No.35095)

4340 Chrome-Moly Replacement Outer Stub For Dana 60 & 70, 35 Spline, 12" Long

from

$239.99
Product Features:
  • Fits Dana Spicer 60 front in GM and Dodge trucks
  • 4340 Chromoly
  • Outer stub
  • 35 spline
  • 12″ from end of splines to center of u-joint bore
See More
View Product

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10061)

CV Axle Shaft Assembly

from

$135.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

(7 reviews)
View Product

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.936-524)

Rear Drive Shaft: Greaseable, Adjustable

from

$936.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-224)

Front Drive Shaft: Greaseable, Adjustable

from

$479.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

EMPI/Empire – Axle Nut (Part No.K40301617413EMP)

Axle Nut

from

$4.93
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More
View Product

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(3 reviews)
View Product

Yukon Gear – Long Shaft Inner Clip For 9.25" GM IFS (Part No.33371)

Long Shaft Inner Clip For 9.25" GM IFS

from

$29.99
Long shaft inner clip for 9.25″ GM IFS.

Product Features:
  • Stub axle snap ring
  • Fits GM 9.25″ IFS
See More
View Product

Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)

Spindle Bearing For Dana 44

from

$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.

Product Features:
  • Spindle bearing
  • Fits Dana Spicer 44
See More
View Product

National – Bearings (Part No.B-2410)

Bearings

from

$24.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More
View Product

Yukon Gear – Axle Bearing & Seal Kit For 10.5" GM 14 Bolt Truck (Part No.10036)

Axle Bearing & Seal Kit For 10.5" GM 14 Bolt Truck

from

$178.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for GM 14T (full-floating). This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More
View Product

Yukon Gear – Axle Bearing & Seal Kit For GM 9.25" IFS Front (Part No.10037)

Axle Bearing & Seal Kit For GM 9.25" IFS Front

from

$197.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Left, Right, and intermediate axle bearings and seals for 9.25″ GM IFS. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM 9.25″ IFS
  • Includes intermediate bearing, axle bearings and seals
See More
View Product

Yukon Gear – Dana 50/60 Rear Axle Bearing And Seal Kit Replacement (Part No.10009)

Dana 50/60 Rear Axle Bearing And Seal Kit Replacement

from

$129.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for Dana 50 and 60, ’78 to ’97 Ford, ’78 to ’88 Chevy, and ’74 to ’93 Dodge front. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits 1978-1997 Ford, 1978-1988 GM and 1974-1993 Dodge 1-Ton fronts
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More
View Product

Yukon Gear – AxleHubBolt (Part No.33583)

AxleHubBolt

from

$5.99
AxleHubBolt
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$39.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1960-2015
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • NO STUDS
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2012
  • Weight approx: 1 Lbs
  • CUSHION INSERT ONLY
  • FOR COMPLETE MOUNT SEE PART 6056
See More
View Product

Spicer – Center Support Bearing (Part No.211793-1X)

Center Support Bearing

from

$88.99
Center Support Bearing
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6091)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$103.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 94-12;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1988-2012
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • WITHOUT PLATE
  • WITH STUDS
See More
View Product

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)

Drive Shaft Center Support

from

$29.49
Drive Shaft Center Support

(4 reviews)
View Product

1997 GMC K3500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1997 GMC K3500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 57 different Drive Shafts and Axles in our inventory ranging from $3.99 to $936.99. That means you can find the exact parts or products you need to keep that 1997 GMC K3500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1997 GMC K3500. Spicer, Felpro, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1997 GMC K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 408 reviews in this category, some of the top rated parts include CV Axle Shaft Assembly with 3.7 stars and Drive Shaft Center Support with 2.5 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1997 GMC K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1997 GMC K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 GMC K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Axle Shaft Lock C-Clips categories, plus more. For a 1997 GMC K3500, our most popular Dorman – Help Drive Shafts and Axles include:
Axle Shaft Lock Assortment
from $6.49
(3)
Axle Shaft Lock Assortment
Axle Shaft Lock C-Clips

Top 1997 GMC K3500 Drive Shafts and Axles from Spicer

Spicer products are another trusted brand when it comes to Drive Shafts and Axles for your 1997 GMC K3500. Popular Spicer parts include:
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $44.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints

FAQs for 1997 GMC K3500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1997 GMC K3500?

Out of 57 Drive Shafts and Axles for the 1997 GMC K3500, the most popular in our inventory are:
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Multi Purpose Bearing
from $73.99
(17)
Multi Purpose Bearing
Drive Shaft Center Supports

What are the top-rated 1997 GMC K3500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1997 GMC K3500 based on customer reviews/ratings are:
CV Axle Shaft Assembly
from $135.99
(7)
CV Axle Shaft Assembly
“Exactly as what I needed”
Drive Shaft Center Support
from $29.49
(4)
Drive Shaft Center Support
“great part excellent service”
Multi Purpose Seal
from $11.99
(3)
Multi Purpose Seal
“no leaks”

More Popular Parts for All Makes