1997 Dodge Neon Performance and Racing Products
More 1997 Dodge Neon Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1997 Dodge Neon, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1997 Dodge Neon Performance and Racing Products
Energy Suspension – Control Arm Bushing Set (Part No.5.3116G)
from
$69.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.5.7114G)
from
$35.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Sway Bar Bushing Set (Part No.5.5156R)
from
$14.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.5.5149G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Bully Dog – Watch Dog Economy Monitor (Part No.40400)
from
$241.99
Reads and erases diagnostic trouble codes (dtc’s). Tests horsepower, torque and performance. Internet updateable. Transferable to any applicable vehicle application. Easy to use capacitive touch buttons. Full color LCD.
Product Features:
See More
Product Features:
- Reads And Erases Diagnostic Trouble Codes (DTCs)
- Tests HP/Torque And Performance
- Internet Updateable
- Transferable to Any Applicable Vehicle Application
- Easy To Use Capacitive Touch Buttons
- Full Color LCD
Energy Suspension – End Link Bushing Set (Part No.5.8102G)
from
$13.99
Get real performance for both on the road and off. Popular performance car, truck and SUV applications. A real must for competition use – or just for that seat-of-the-pants fun. Increases vehicle stability and control as well as durability. Reduces wheel hop and traction loss. Proven for many years, by both professional and amateur racers alike. Both restores and improves better than new. Made of Energy’s Hyper-Flex performance polyurethane. Heavy duty metal components are used for increased strength, when applicable.
Product Features:
See More
Product Features:
- Easy to Install
- Increase Efficiency
- Superior Performance and Greater Longevity
- Last Much Longer Than OEM Rubber End Links
Energy Suspension – Sway Bar End Link Kit (Part No.9.8124G)
from
$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13103G)
from
$6.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Strut Rod Bushing Set (Part No.5.7110G)
from
$44.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Flowmaster Inc. – 60 Delta Flow Muffler – 2.00 Center In / 2.00 Offset Out – Moderate Sound (Part No.952062)
from
$145.99
The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Delta Flow Muffler – 2.25 Center In / 2.00 Dual Out – Moderate Sound (Part No.9424502)
from
$118.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942452)
from
$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Edelbrock – Nitrous Performer EFI Wet System (Part No.71820)
from
$730.99Product Features:
- Best Way To Get A Major Power Increase
- Power Increases From 50-70 HP
- Work With Stock ECU
- Simple Installation
MSD Ignition – Coil; Mitsubishi; Dodge; 96-on (Part No.8239)
from
$112.99
MSD offers these two 4-tower coils as replacements for a variety of years ranging from 1994-2003 on vehicles including Mitsubishi, Neon’s and others. Note: flat terminals are used on PN 8239. Some OE coils use round terminals. The MSD coil features flat terminals. Contact MSD customer service for the connector to convert round terminals to flat. If you plan to run an MSD DIS ignition please look at PN 8883 for a direct plug-in wiring harness.
Product Features:
See More
Product Features:
- Performance replacement for Mitsubishi 2.0L 1996 to early 1999
- Performance replacement for Dodge 2.0L from mid 1997 to 2002
- 77:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- Flat terminal connection only
- CARB E.O. Approved
Energy Suspension – Motor Mount Insert (Part No.5.1109G)
from
$39.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Energy Suspension – Motor Mount Insert (Part No.5.1107R)
from
$60.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
K&N – Cold Air Intake: Adds Up To 5 Horsepower, With Million Mile Air Filter (Part No.57-1534)
from
$375.99
The K&N 57-1534 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Dodge Neon models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-1534 air intake comes with a vented rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the air filter and into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.57-1512)
from
$329.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Popular 1997 Dodge Neon Performance and Racing Products Categories
1997 Dodge Neon Performance and Racing Products
You count on your 1997 Dodge Neon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 18 Performance and Racing Products ranging in price from $5.99 to $730.99, you’re sure to find everything you need for your 1997 Dodge Neon.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 6 different brands like Energy Suspension, MSD Ignition, and Flowmaster Inc.. 1997 Dodge Neon Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 18 extensive product reviews on 1997 Dodge Neon Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1997 Dodge Neon below to get started!
Top-Rated Performance and Racing Products Brands For Your 1997 Dodge Neon
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Dodge Neon running right for years to come. In our inventory you’ll find brands like Energy Suspension, MSD Ignition, Flowmaster Inc., and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Intake Kits. All are waiting to get your 1997 Dodge Neon back on the road. Some of the top-rated K&N products in these categories are:
from
$329.99
(1)
Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits
Top-Rated Performance and Racing Products
If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1997 Dodge Neon, and some of our most reviewed parts include:
FAQs for 1997 Dodge Neon Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1997 Dodge Neon?
Out of 18 Performance and Racing Products for the 1997 Dodge Neon, the most popular in our inventory are:
from
$184.99
This product is not rated
60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Performance Exhaust Mufflers
