1997 Chevrolet S10 Performance Engines
More 1997 Chevrolet S10 Performance Engines
Find your specific 1997 Chevrolet S10 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 Chevrolet S10 Performance Engines
B & M – Holeshot 2400 (Part No.70441)
from
$689.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$717.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Timing Cover Gasket Set (Part No.90)
from
$21.99
Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent sealing and durability. These gaskets can be reused.
Product Features:
See More
Product Features:
- Will not shrink or stick
- Provides excellent sealing and durability
- Reusable
Mr. Gasket – Timing Cover Seal (Part No.18)
from
$16.99
Mr. Gasket manufactures a variety of performance parts and accessories, including carburetor and fuel accessories, cooling system accessories, engine components, fasteners, gaskets, and suspension and drive line components. Besides gaskets and fasteners, the Mr. Gasket brand provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools and suspension and driveline components. Mr .Gasket also includes Ultra-Seal gaskets and fasteners.
Product Features:
See More
Product Features:
- Nitrile rubber and high density cork
- Will not shrink or stick
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1015-1)
from
$58.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro® Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Copper wire rings to essentially eliminate head brinelling and bending.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Cylinder Head Gasket (Part No.1029)
from
$47.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Copper wire rings to essentially eliminate head brinelling and bending.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1002)
from
$68.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1015)
from
$44.49
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro® Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Not intended for use in emission controlled vehicles.
- Steel wire rings for the greatest combustion seal strength.
Edelbrock – Performer 2V-4V; Intake Manifold Gasket Set (Part No.6941)
from
$11.99Product Features:
- Replacement Gasket For PN[3787] Edelbrock Intake
- One Gasket Only
- Goes Between Base PN[3785] And Top PN[3787]
- Also Included in Base PN[3787]
Edelbrock – Performer 4.3L T.B.I. V6; Intake Manifold (Part No.37131)
from
$553.99Product Features:
- Polished Manifold Version of PN[3713]
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Computer Chip Available – Return Card in Packaging
- Accepts All Factory Accessories
- Not for Vehicles with Flash Memory Computer
- Gains 6/10s of a Second in 10 to 70 MPH
- Stock Throttle Body Remains in Stock Position
Mr. Gasket – Intake Manifold Bolts (Part No.6091)
from
$29.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.
Product Features:
See More
Product Features:
- Grade 8 Material
- Extra Thick Flat Washers
- Ideal For Minimal Space
- 12-pt Head And Flange
- Zinc Plated For Protection
Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)
from
$26.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
Product Features:
See More
Product Features:
- Assures Accurate Torque App
- Prevents Galling Manifold
- Grade 5 Material
- Black Oxide Coasted
Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)
from
$205.99
Product Features:
See More
- Matching Top For Edelbrock Base Intake PN[3785]
- Designed for Standard Flange 4-barrel Carburetor
- Contains Necessary Linkage And Bracketry
- Match With Edelbrock Valve Covers Pn[4488]
Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)
from
$361.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Ideal for Light-Duty Pickups and Passenger Cars
- Unique Design Allows Use Of 2 bbl Or 4 bbl Top
Edelbrock – Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold (Part No.3713)
from
$566.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Computer Chip Available – Return Card in Packaging
- Accepts All Factory Accessories
- Not for Vehicles with Flash Memory Computer
- Gains 6/10s of a Second in 10 to 70 MPH
- Stock Throttle Body Remains in Stock Position
Popular 1997 Chevrolet S10 Performance Engines Categories
1997 Chevrolet S10 Performance Engines
Maybe you’re in the middle of a full rebuild of that 1997 Chevrolet S10. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 5 different Performance Engines in our inventory ranging from $20.29 to $689.99. That means you can find the exact parts or products you need to keep that 1997 Chevrolet S10 running smoothly.
Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Chevrolet S10. FEL-PRO Performance, B & M, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1997 Chevrolet S10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1997 Chevrolet S10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1997 Chevrolet S10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Chevrolet S10 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your S10 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Mr. Gasket Performance Engines
We carry Mr. Gasket parts in our stock across Performance Intake Manifolds categories, plus more. For a 1997 Chevrolet S10, our most popular Mr. Gasket Performance Engines include:
FAQs for 1997 Chevrolet S10 Performance Engines
What are the most purchased Performance Engines for the 1997 Chevrolet S10?
Out of 5 Performance Engines for the 1997 Chevrolet S10, the most popular in our inventory are:
from
$20.29
This product is not rated
Engine Timing Cover Gasket
Performance Engine Timing Cover Gasket Sets
from
$68.99
This product is not rated
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
