1997 BMW 328i Engine Parts

Below you will find various in-demand BMW Engine Parts, components and accessories for your 1997 328i. Advance Auto Parts has popular 328i parts like Engine Timing Parts, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other 328i model years including 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and more. Select a category of 1997 BMW 328i Engine Parts below and start saving instantly.

Popular 1997 BMW 328i Engine Parts Categories

Valve Covers

Engine Variable Timing Solenoids

Valve Cover Gaskets

Oil Pan Gaskets

Camshaft Position Sensors

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Mounts

Oil Pans

Valve Cover Grommets

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Crankshaft Seals

Oil Caps

Camshaft Position Sensor Connectors

Timing Chain Tensioners

O-Rings

Crankshaft Pulleys

Main Bearing Repair Sleeves

Timing Cover Seals

Engine Valve Stem Seals

Engine Oil Separators

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Lower Gasket Sets

Turbocharger Coolant Lines

Timing Chains

Camshaft Seals

Oil Pump Chains

Engine Oil Seal Rings

Fuel Tank Sending Unit Gaskets

Dipstick Housing Gaskets

Engine Valve Guides

Piston Pin Bushing Sets

Engine Cylinder Head Nuts

Timing Chain Tensioner Gaskets

Engine Intake Pipe Seals

Engine Oil Cooler Nut

Engine Timing Chain Case Cover Gaskets

Engine Valve Cover Bushing

Essential Engine Parts for 1997 BMW 328is

from

$3.11

Freeze Plug

from

$38.99

Rein Automotive OE quality breather valves fit European vehicles the way the original manufacturer intended. Designed to be a direct replacement for the breather valve, Rein breather valves are identical to the OEM.

Product Features:

Direct replacement for easy installation
Manufactured to strict engineering quality standards.
Component is produced using only the highest quality materials.
Restores proper factory crankcase pressure.

from

$133.01

Crank Position Senso

from

$119.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$49.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$69.18

WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

High-quality design and engineering for perfect performance
Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

from

$7.85

Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features:

Original Equipment Manufacturer
Maximum Load-Bearing Capacity
Fatigue-Resistant, adaptable
Resistant to Wear and Corrosion
Advanced Surface Coatings

from

$350.15

WARNING: This item cannot be returned for a replacement or refund if opened! Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials. All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions. Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$7.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$80.99

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$35.63

MAHLE Original piston rings lead the way in ring technology and innovation for the Aftermarket – after all, MAHLE is the largest manufacturer of piston rings in the world. MAHLE Original rings are at the forefront of light vehicle piston ring technology. Extensive OE connections mean that MAHLE Original rings have the technological edge. Things like the CP-20 oil ring, narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings and coated compression rings for diesels all came from the OE. The MAHLE Original performance line proves time and again that it should be the ring of choice under every hood – regardless of the application. Grey cast iron or ductile iron was traditionally the material of choice for automotive applications – today, steel is preferred over iron by more and more engine builders. Steel compression ring technology has been used in heavy-duty applications for over 30 years. That know-how has become essential to the design and engineering of today’s automotive engines. Steel piston rings offer higher tensile strength, higher yield strength, greater fatigue life, and greater hardness while still offering a lower ring mass. These factors lead to better stress resistance, reduced groove pound-out, longer service life, better conformability, superior oil economy, and improved blow-by control while still lowering friction.

Product Features:

Ease of installation makes them the premier choice for rebuilders everywhere.
The CP-20 rings can withstand the harsh operating environments in today’s engines.
The CP-20 consists of a barrel-faced top compression ring for better seal and quicker break-in, a reverse torsional twist second ring for better oil control
The CP-20 design oil ring that is easier to install
Chemically polished for better oil drain-back
A 20 degree ear angle to ensure side seal around the ring

from

$1.07

Seal Ring – Aluminum

from

$3.76

Oil Dipstick Seal

from

$16.99

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

Prevents moisture and debris from entering and contaminating the system
Direct fit
Manufactured to strict engineering standards/specifications in materials and tolerances
Produced by an original equipment supplier

from

$10.49

GENERAL SEAL

from

$37.90

Oil Pump Chain

from

$10.76

Fuel Sender Seal

from

$603.81

Oil Pan

from

$82.99

Redi-Sleeve

from

$93.99

This replacement engine oil line is engineered to match the fit and durability of the original equipment oil line. It is made from durable materials to withstand the pressure and temperature demands of the engine’s oil system.

Product Features:

Ideal replacement – this oil line matches the fit, function and durability of the original equipment oil line for a reliable, leak-free repair.
Durable construction – this part is specifically designed to withstand the temperatures and pressures of the engine’s lubrication system.
Easy to install – this oil supply line features original equipment-style fittings to ensure quick and secure installation
Quality tested – this part has undergone burst, corrosion and material testing to ensure a long service life

from

$33.49

SHAFT SEAL

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$8.06

Valve Cover Nut

from

$30.02

Timing Guide Rail

from

$31.20

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$136.65

The APA/URO Crankshaft Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment manufacturer.

Product Features:

OE-Equivalent and a direct fit application
Precision machined belt and seal surfaces
Dynamically computer balanced
Durable long life performance

Upgrade your 1997 BMW 328i with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1997 BMW 328i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Engine Parts are key to keeping your 328i functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Engine Parts for the 1997 BMW 328i, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1997 BMW 328i at great prices. Our Engine Parts inventory for this model ranges from just $1.07 to $888.99, with an average price of $65.75. Our 94 Engine Parts in stock come from 31 trusted brands, so you’re sure to find the right part for your 1997 BMW 328i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 BMW 328i, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Carquest Premium, National, and more. FELPRO Engine Parts start at just $9.49 and boast an impressive 5 stars average rating from customers. Carquest Premium and National also bring quality to the table, with Engine Parts available starting at $7.49, and at an average 4 stars rating. With 134 customer reviews and counting, our 1997 BMW 328i Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 BMW 328i is always ready to roll. We’re committed to providing you with everything you need to keep your 328i in top shape, all in one place. Start shopping confidently below for your 1997 BMW 328i!

Best-Selling Engine Timing Parts for 1997 BMW 328is

Enhance the driving experience in your BMW with 9 quality Engine Timing Part components, starting at $7.49.

show more show less

from

$30.02

Timing Guide Rail

from

$33.99

Timing Guide Rail

from

$245.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$93.29

Timing Chain

from

$61.87

Timing Chain

from

$32.04

Chain Tensioner Pist

from

$27.57

Timing Chain Tension

from

$23.99

SHAFT SEAL

from

$7.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Most Popular 1997 BMW 328i Camshafts

Customize your BMW with 10 Camshafts products like Camshaft Position Sensors, Camshaft Seals, and Camshaft Position Sensor Connectors, all priced under $119.99.

show more show less

from

$41.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$119.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$41.49

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$41.19

Camshaft Position Se

from

$33.37

Camshaft Position Se

from

$24.98

Camshaft Follower

from

$10.49

GENERAL SEAL

from

$5.29

Product Features:

Brand may vary by location

Top Picks for 1997 BMW 328i Engine Mounts

Upgrade BMW 328is with top-quality Engine Mounts parts, including 4 OEM and aftermarket selections for your 1997 model.

show more show less

from

$69.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 92-13;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2013
Weight approx: 2 Lbs
HYDRAULIC

from

$92.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Matches Original Equipment design specifications
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$83.27

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$50.90

Engine Mount

In-Demand Valve Cover and Cylinder Heads for 1997 BMW 328is

Select from 17 premium Valve Cover and Cylinder Heads parts for your 1997 BMW 328i, with prices ranging from $3.14 to $350.15.

show more show less

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$3.14

Valve Keeper

from

$161.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$42.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$350.15

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$266.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

from

$226.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

from

$49.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$43.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$33.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$31.20

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$23.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$11.35

Valve Guide

from

$10.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$8.06

Valve Cover Nut

from

$6.26

Valve Cover Mount

from

$3.14

Valve Keeper

Most Sold 1997 BMW 328i Engine Gaskets and Seals

Explore our best-selling BMW parts for the 1997 328i among 19 OEM and aftermarket options starting from $1.07.

show more show less

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$45.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$1.07

Seal Ring – Aluminum

from

$3.76

Oil Dipstick Seal

from

$32.58

Oil Pan Gasket

from

$119.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$52.13

High-quality design and engineering for perfect performance
Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

from

$45.49

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds original equipment specifications.
Zero engine leakage for late model vehicles.

from

$29.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$16.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$15.99

Valve Stem Seal Kit

from

$13.43

Valve Stem Seal Kit

from

$12.81

Timing Case Cover Gasket

from

$11.85

Fuel Sender Seal

from

$10.68

Timing Cover Gasket

from

$1.53

Chain Tensioner Gask

from

$1.21

SEAL RING

from

$1.18

SEAL RING – COPPER

Top-Rated Engine Parts Brands For Your 1997 BMW 328i

Shop for the best-rated brands offering Engine Parts and other products for your 1997 BMW 328is. Below you’ll find some of our best rated Engine Parts from FELPRO, Carquest Premium, and National, and more. Engine Parts from these brands that fit a 1997 328i start at just $7.49 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1997 BMW 328i Engine Parts

When it comes to maintaining or upgrading your 1997 BMW 328i, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1997 BMW 328i. With over 7 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.49, with an average price of just $97.20. Plus, with over 124 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$119.99

This product is not rated

Engine Conversion Gasket Set

“”

from
$226.99

This product is not rated

Cylinder Head Gasket: Composite, Without Head Bolts

“”

from
$161.99

This product is not rated

Cylinder Head Gasket Set

“”

Popular Carquest Premium 1997 BMW 328i Engine Parts

Carquest Premium auto parts is one of the highest quality Engine Part brands in the market. Any 1997 BMW 328i owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1997 328i, Advance Auto Parts carries a full inventory of 6 Carquest Premium Engine Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Carquest Premium Engine Parts range from $12.49 to $245.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$19.99

This product is not rated

A/C Compressor Cut-Out Switch Harness Connector

“”

from
$46.99

This product is not rated

Crankshaft Sensor

“”

from
$12.49

This product is not rated

ABS Wheel Speed Sensor Connector

“”

FAQs for 1997 BMW 328i Engine Parts

Which Engine Parts are best-sellers for 1997 BMW 328is?

Out of 94 Engine Parts that fit 1997 BMW 328is, the following parts are the top sellers:

Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (20688770) – $56.99
Crankshaft Sensor (12351896) – $46.99
Oil Filler Cap (15480084) – $21.99

What’s the price range for 1997 BMW 328i Engine Parts?

Engine Part prices for the 1997 BMW 328i start at $1.07 and go up to $888.99 for the most premium parts.

What’s the average price of a Engine Part for a 1997 BMW 328i?

The average price for Engine Parts for the 1997 BMW 328i is $65.75. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other BMW 328i model years?

Yes, we currently carry Engine Parts for 14 model years of BMW 328is between 1996 and 2016. Engine Parts are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, and 2008.

What are the cheapest Engine Parts for my 1997 BMW 328i?

The cheapest 1997 BMW 328i Engine Parts we carry in stock are:

Seal Ring – Aluminum (11973200) – $1.07
SEAL RING – COPPER (11263320) – $1.18
SEAL RING (11075008) – $1.21
Chain Tensioner Gask (11973154) – $1.53
EXHAUST NUT (11261448) – $2.19

What are the top-rated Engine Parts that fit the 1997 BMW 328i?

Out of 134 reviews by customers, our 1997 BMW 328i Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1997 BMW 328i and their top-rated products:

Valve Cover and Cylinder Heads
- VALVE COVER GROMMET SET (10901058) – $9.49
Engine Gaskets and Seals
- VALVE COVER GROMMET SET (10901058) – $9.49

What types of Engine Parts do you sell for my 1997 BMW 328i?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 1997 BMW 328i:

Can I get help with 1997 BMW 328i Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Engine Parts and more.

What is your return policy for BMW 328i Engine Parts?

Advance Auto Parts keeps returns simple. For new BMW 328i Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 BMW 328i Engine Parts

Febi – Freeze Plug (Part No.A103014658FEB)

Rein – Breather Valve (Part No.ABH0198)

Aftermarket – Crank Position Senso (Part No.A2255411254OEA)

Felpro – Engine Conversion Gasket Set (Part No.CS 26251)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32002-02)

Elring – Valve Cover Gasket Set (Part No.A8029411208ELR)

Glyco – Wrist Pin Bushing (Part No.A206014869GLY)

Elring – Cylinder Head Gasket Set (Part No.A801072152ELR)

National – Multi Purpose Seal (Part No.223802)

Dorman – Turbocharger Feed Line (Part No.667-552)

Mahle – Piston Ring Set (Part No.A2050284251MAH)

CRP – Seal Ring – Aluminum (Part No.4M10011207CRP)

CRP – Oil Dipstick Seal (Part No.A1120266451CRP)

Rein – Cap-Oil (Part No.CPL0036)

FAG US – GENERAL SEAL (Part No.SS2662)

Iwis – Oil Pump Chain (Part No.A603011948IWI)

A.P.A. URO – Fuel Sender Seal (Part No.E2050137234APA)

APA/URO Parts – Oil Pan (Part No.A6060267706APA)

National – Redi-Sleeve (Part No.99353)

Dorman – Engine Oil Supply Line (Part No.625-513)

FAG US – SHAFT SEAL (Part No.SS3383)

Felpro – VALVE COVER GROMMET SET (Part No.ES 72490)

APA/URO Parts – Valve Cover Nut (Part No.A3110336921APA)

Febi – Timing Guide Rail (Part No.A504072685FEB)

TRW – TRW Exhaust Valve (Part No.A4050456536TRW)

APA/URO Parts – Crankshaft Pulley (Part No.A208092608APA)

Febi – Timing Guide Rail (Part No.A504072685FEB)

Febi – Timing Guide Rail (Part No.A5040119445FEB)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1219)

Iwis – Timing Chain (Part No.A510091396IWI)

Iwis – Timing Chain (Part No.A510091395IWI)

Febi – Chain Tensioner Pist (Part No.A517091572FEB)

Febi – Timing Chain Tension (Part No.A511366551FEB)

FAG US – SHAFT SEAL (Part No.SS6284)

National – Multi Purpose Seal (Part No.223802)

National – Shaft Repair Sleeve (Part No.99147)

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1506)

Dorman – Magnetic Camshaft Position Sensor (Part No.907-740)

Autopart International Inc – Camshaft Position Se (Part No.A40151911550API)

WSO – Camshaft Position Se (Part No.A4015114625WSO)

INA – Camshaft Follower (Part No.A4010139735INA)

FAG US – GENERAL SEAL (Part No.SS2662)

Driveworks – Oil Seal (Part No.S-224052)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9003)

Rein – Engine Mount (Part No.AVE0046P)

Corteco – Corteco Engine Mount (Part No.A7000308827CFW)

Autopart International Inc – Engine Mount (Part No.A70001947446API)

Felpro – VALVE COVER GROMMET SET (Part No.ES 72490)

TRW – Valve Keeper (Part No.A4070774061TRW)

Felpro – Cylinder Head Gasket Set (Part No.HS 26252 PT-2)

MAHLE Original – Engine Cylinder Head Bolt Set (Part No.GS33464)

Elring – Cylinder Head Gasket Set (Part No.A801072152ELR)

URO Parts – Valve Cover with Gasket (Part No.11121703341)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.26264 PT)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32002-02)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-31940-00)

MAHLE Original – Engine Cylinder Head Bolt Set (Part No.GS33409)

TRW – TRW Exhaust Valve (Part No.A4050456536TRW)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32101-01)

CRP – Valve Guide (Part No.A3060435500CRP)

Victor Reinz – Engine Valve Cover Grommet Set (Part No.15-33388-01)

APA/URO Parts – Valve Cover Nut (Part No.A3110336921APA)

Febi – Valve Cover Mount (Part No.A316472159FEB)

KS – Valve Keeper (Part No.A407084736KS)

Felpro – Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (Part No.OS 30747 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50601 R)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40681)

CRP – Seal Ring – Aluminum (Part No.4M10011207CRP)

CRP – Oil Dipstick Seal (Part No.A1120266451CRP)

Corteco – Oil Pan Gasket (Part No.A613058718CFW)

Felpro – Engine Conversion Gasket Set (Part No.CS 26251)

Elring – Valve Cover Gasket Set (Part No.A8029275915ELR)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 3 Pieces (Part No.15-31401-01)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-08)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.71-27698-10)

Hebmuller – Valve Stem Seal Kit (Part No.A806939458HEB)