Name: GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart
Brand: Castrol
SKU: 15980E
Price: 30.99 USD
Rating: 5.0 (670 reviews)

Essential Oil and Lubricants for 1996 Volkswagen Passats

from

$30.99

Castrol GTX High Mileage 5W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
MB-Approval 229.5
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$29.99

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

from

$31.99

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear and tear. Pentosin HP 5W-30 is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL/CL and is a standard full synthetic oil.

Product Features:

An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces engine oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
Fully Synthetic Composition: PENTO HP 5W-30 1L is a fully synthetic engine oil, providing superior protection and performance for your vehicle’s engine.
High Performance Formula: This engine oil is specifically designed for high performance vehicles with extended oil service intervals, ensuring optimal engine performance and longevity.

from

$6.49

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-Speed Pre-Ignition Control
Chain Wear Protection
Piston Cleanliness
Turbo-Compatibility
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
High-Quality Conventional Base Stocks: FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks for reliable engine protection.
Versatile Compatibility: Suitable for modern gas-direct engines (GDI), turbo gas-direct engines (TGDI), and older carbureted or normally fuel-injected gasoline engine designs.
Meets Industry Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories.
Broad Operating Range: Designed to provide reliable engine protection across a broad range of operating conditions.

from

$9.99

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

from

$6.49

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-Speed Pre-Ignition Control
Chain Wear Protection
Piston Cleanliness
Turbo-Compatibility
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
SAE oil weight of 10W-30, making it a dependable choice for various engine types.

from

$19.99

FRAM Heavy Duty 15W-40 Diesel Oil is premium high performance diesel engine oil utilizing the latest in engine oil additive technology to offer the ultimate protection of your engine. Designed to meet or exceed the latest OEM and API CK-4 requirements, it is also backwards compatible to previous OEM and API specifications such as CJ-4, CI-4, CI-4+, and CH-4. STP 15W-40 Diesel Oil carries the API SN classification for use in gasoline engines and is an excellent choice for operators with mixed fleets. The FRAM HD 15W-40 diesel oil is specially designed to protect EGR/Low-Emission Diesel Engines while maximizing the durability of Diesel Particulate Filters (DPF’s).

Product Features:

High soot handling
Improved sludge control
Excellent component protection for corrosion and wear
Superior oxidation stability
Shear stable formulation
One oil for mixed Fleets
Exceptional oil consumption control.
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

from

$11.99

Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
ACEA A5/B5, C2
Exceeds API SP/SN PLUS/SN/SM
GM dexos1 Gen 3
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$39.99

High soot handling
Improved sludge control
Excellent component protection for corrosion and wear
Superior oxidation stability
Shear stable formulation
One oil for mixed Fleets
Exceptional oil consumption control

from

$34.99

Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

Conventional 10W-40 that provides durable wear protection and reduces engine wear
Provides corrosion protection against harmful acids generated by engine contaminants
Maintains viscosity from start to finish, providing optimal oil film protection
Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
Combats engine sludge and deposits
Formulated to exceed the requirements of industry specification API SN and all previous categories
Formerly known as Quaker State Advanced Durability 10W-40 motor oil

from

$6.29

Conventional 10W-40 that provides durable wear protection and reduces engine wear
Provides corrosion protection against harmful acids generated by engine contaminants
Maintains viscosity from start to finish, providing optimal oil film protection
Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
Combats engine sludge and deposits
Formulated to exceed the requirements of industry specification API SN and all previous categories
Formerly known as Quaker State Advanced Durability 10W-40 motor oil
Rust Protection: Provides rust protection from harmful acids generated by engine contaminants, extending the life of your engine.

from

$12.49

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 10W-40. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 10W-40 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing¿results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

Mobil 1 high mileage full-synthetic engine oil 10w-40 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes. (1)
Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
Manufacturer part number: 103536

from

$59.99

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

Best-Selling Motor Oil for 1996 Volkswagen Passats

Enhance the driving experience in your Volkswagen with 91 quality Motor Oil components, starting at $5.89.

show more show less

from

$38.99

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Porsche A40
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C961-A1

from

$30.99

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
MB-Approval 229.5
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$37.99

Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

1.2X Better viscosity control to help engines run better for longer (1)
2X Better engine cleanliness to help maximize engine performance (1)
(1) As measured in DV6 test vs. test limit
Approved and licensed specifications:
ACEA A3/B4
API SP
BMW Longlife-01
ILSAC GF-6
MB-Approval MB 229.5
Renault RN0700 / RN0710
VW 502 00 / 505 00
Meets engine test requirements of Chrysler MS 12991

from

$37.99

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending February 25, 2023)

Product Features:

Mobil 1 fs european car formula full synthetic engine oil 0w-40 helps to extend engine life even in severe conditions
Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes(1)
Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees f ) and low temperature protection (up to -40 degrees f )
Manufacturer part number: 120760

from

$37.99

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
ILSAC GF-6
Exceeds API SP/SN PLUS/SN/SM
GM dexos1 Gen 3
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$30.99

Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
ILSAC GF-6
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$11.99

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
ACEA A5/B5, C2
Exceeds API SP/SN PLUS/SN/SM
GM dexos1 Gen 3
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$11.99

Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes(1)
Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
Manufacturer Part Number: 112628
Turbocharged Engine Protection: Approved for many Mercedes-Benz, VW, Audi, and Porsche vehicles, this formula offers excellent protection for turbocharged engines.

from

$12.49

1.2X Better viscosity control to help engines run better for longer (1)
2X Better engine cleanliness to help maximize engine performance (1)
(1) As measured in DV6 test vs. test limit
Approved and licensed specifications:
ACEA A3/B4
API SP
BMW Longlife-01
MB-Approval MB 229.5
Renault RN0700 / RN0710
VW 502 00 / 505 00
Meets engine test requirements of Chrysler MS 12991

from

$12.99

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C960-A1
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$29.99

Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.

Product Features:

Premium-quality base oils and anti-wear additives that help extend engine life
Superior protection against engine sludge
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
ILSAC GF-6
Meets Ford WSS-M2C946-B1

from

$10.49

Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1)Based on API and ACEA volatility specifications
Approved for BMW M-Models
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$29.99

Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C961-A1

from

$12.49

Castrol EDGE Euro 5W-30 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

1.2X Better viscosity control to help engines run better for longer (1)
2X Better engine cleanliness to help maximize engine performance (2)
(1) As measured in DV6 test vs. test limit
(2) As measured in OM646LA test vs. test limit
Approved and licensed specifications:
ACEA A3/B4
API SL
Meets Ford WSS-M2C946-B1
BMW Longlife-01
MB-Approval 229.5
VW 502 00 / 505 00

from

$11.99

Castrol EDGE 5W-50 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
Meets Ford WSS-M2C945-B1
Exceeds API SP/SN PLUS/SN/SM

from

$11.49

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
Extra wear protection vs. industry and oem standards with advanced anti-wear additives
Superior performance for european gasoline and diesel engines
Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
Superior engine sludge and varnish protection for European-made gasoline and diesel engines.

from

$29.99

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

from

$12.49

CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1 quart container.

Product Features:

Optimized to deliver 40% better performance than required by acea standards.
Recommended by world leading auto manufacturers
Engine protection for the entire drain interval even under extreme pressure of high output engines
Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
Formerly known as castrol slx
Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.

from

$9.99

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

Premium-quality base oils and anti-wear additives that help extend engine life
Superior protection against engine sludge
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets or exceeds the following specifications:
Meets Ford WSS-M2C945-B1
Meets Ford WSS-M2C960-A1

from

$11.49

Pennzoil Platinum Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum Euro motor oil.

Product Features:

No other leading engine oil provides better protection from friction1? 1 based on sequence iva wear test using sae 0w-40.
Better fuel economy2 2 meets the requirements of mb 229.5 which includes fuel economy improvement (fei) requirement as determined in industry standard gasoline engines
Protects horsepower
Nothing keeps your engine close to factory clean3 3 based on sequence vh and m-111 sludge test using sae 0w-40.
Complete protection and performance for European vehicles.
Extends engine life and protects for up to 15 years or 500,000 miles, whichever comes first.

from

$9.99

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C960-A1

from

$10.49

Phosphorus Replacement Technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
Meets or exceeds the following specifications:
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SM
ILSAC GF-6

from

$37.99

Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
Exceeds API SP/SN PLUS/SN/SM

from

$56.99

High-tech low-friction motor oil based on synthetic technology. Ensures excellent engine cleanliness and exceeds even the strictest test requirements of well-known vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.). Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine.

Product Features:

Outstanding protection against wear
Reduces oil and fuel consumption
Ensure fast oil penetration of the engine
High tech low friction based on synthetic technology
Made in Germany
Reduces Deposits: Effectively reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.), maintaining optimal engine performance.
Extended Oil Change Intervals: Specifically designed for vehicles with extremely long oil change intervals (WIV, etc.), making it a cost-effective and convenient choice for long-term use.
Maximizes DPF Life: Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF), contributing to lower maintenance costs and enhanced vehicle longevity.

from

$11.49

Pennzoil Platinum Euro SAE 5W-40 Full Synthetic motor oil with PurePlus Technology is a full synthetic motor oil that is formulated for most Mercedes-Benz, VW, Porsche & Audi Vehicles. PurePlus Technology converts pure natural gas into a base oil with lower friction, better low temperature properties and greater stability than conventional motor oil made from crude. Pennzoil Platinum Euro Full Synthetic motor oil is formulated for most European vehicles. It can be used in both passenger car gasoline and light duty diesel applications.

Product Features:

Nothing keeps your engine closer to factory clean
Better fuel economy
Protects horsepower
Superior wear and corrosion protection
Excellent performance in extreme temperatures
PurePlus Technology: The PurePlus Technology used in the Pennzoil Platinum Euro Full Synthetic Engine Oil provides complete protection to your engine. It converts pure natural gas into a base oil with lower friction, better low temperature properties and
For a full list of equipment approvals and recommendations, please consult your local shell technical help desk and always consult your owner’s manual.

from

$29.99

Castrol GTX 20W-50 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM

from

$11.99

3X Stronger than the leading full synthetic (1)
10X Better high stress performance (2)
20,000 miles between oil changes (3)
(1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
(2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
(3) Or one year, whichever comes first
Approved and Licensed Specifications:
Exceeds API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$79.99

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear. Pentosin HP 5W-30 Synthetic Motor Oil is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL,CL.

Product Features:

An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces engine oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
Fully Synthetic Formula: Pento High Performance Engine Oil is made with a full synthetic formula, providing superior protection and performance for your engine.
Meets API SL/CL Specs: This engine oil meets the latest API SL/CL specifications, ensuring that it meets the highest standards for engine protection and performance.

from

$9.99

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM

from

$9.99

Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
(1) When tested in engines with a high level of sludge
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM

from

$12.99

Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$12.99

Castrol EDGE High Mileage 10W-40 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM

from

$8.49

Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.

Product Features:

Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
Engineered for greater protection against thermal breakdown
Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
Made in the usa
Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.

from

$21.99

5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed to be used in vehicles that call for extended oil drain intervals. This oil is blended by using some of the most modern additives available and carefully selected synthetic based oils. By doing this the oil is considered a Low SAPS formulation that preserves catalysts, the environment, and maintains outstanding engine performance.

Product Features:

An all- season motor oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces motor oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
High Performance Formula: The 5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed for vehicles with extended oil drain intervals.
Advanced Additives: Blended using some of the most modern additives available, ensuring superior engine protection and performance.
Full Synthetic Composition: Made with carefully selected synthetic-based oils, providing excellent lubrication and stability.
Low SAPS Formulation: This oil is a Low SAPS (Sulfated Ash, Phosphorus, and Sulfur) formulation, which helps preserve catalytic converters and is environmentally friendly.
Exceeds Industry Standards: SP III 5W-30 Synthetic Motor Oil exceeds API SM, CF; ACEA A3, B3, B4, C3 standards, ensuring top-notch quality and reliability.

from

$28.49

Pentosin HP II 5W-40 Synthetic Motor Oil is a high-performance engine oil that is designed to provide excellent protection for your vehicle all year round. This fully synthetic oil is formulated to offer longer changing intervals, reduce motor oil sludge and fuel deposits, and preserve the catalyst and the environment. It contains special friction modifiers that help to improve fuel efficiency and maintain outstanding engine performance. Pentosin HP II 5W-40 Synthetic Motor Oil exceeds service class API SM ACEA A3,B4, making it an ideal choice for drivers who demand the best from their vehicles. Whether you’re driving in extreme temperatures or under heavy loads, Pentosin HP II 5W-40 Synthetic Motor Oil will help keep your engine running smoothly and efficiently.

Product Features:

An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces engine oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
Fully Synthetic Oil Composition: PENTO HP II 5W-40 1L is made up of fully synthetic oil composition, which provides superior protection to the engine and ensures longer engine life.
Longer Changing Intervals: The newly formulated PENTO HP II 5W-40 1L allows for longer changing intervals, which means less frequent oil changes and reduced maintenance costs.

from

$9.99

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

from

$31.99

Advanced protection against viscosity and thermal breakdown
Superior protection against engine sludge
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption
(1) When tested in engines with a high level of sludge
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM

from

$31.99

MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

from

$15.99

Castrol EDGE 10W-60 is approved for use in automobile gasoline and diesel engines. This formulation held BMW’s exclusive approval for BMW M-Models from 2000-2014.

Product Features:

Approved and Licensed Specifications include: ACEA A3/B3, A3/B4, API SN/CF, BMW Approved fpr BMW M-Models, VW 501 01 / 505 00

from

$25.99

Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:

Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks

from

$25.99

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes. Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced motor oil formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Available in 1-qt. and 5-qt. bottles, Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. (Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending January 2, 2021)

Product Features:

Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time
Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
Helps extend engine life by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)

from

$5.89

Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks

from

$38.99

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6

from

$31.99

An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces engine oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
Fully Synthetic Composition: PENTO HP 5W-30 1L is a fully synthetic engine oil, providing superior protection and performance for your vehicle’s engine.
High Performance Formula: This engine oil is specifically designed for high performance vehicles with extended oil service intervals, ensuring optimal engine performance and longevity.

from

$114.99

An all- season motor oil offering great protection against harsh start-up conditions and extreme temperature changes.
Formulated for long service life intervals.
Reduces motor oil sludge and fuel deposits.
Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
High Performance Formula: The 5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed for vehicles with extended oil drain intervals.
Advanced Additives: Blended with some of the most modern additives available, ensuring superior engine protection and performance.
Full Synthetic Composition: Made from carefully selected synthetic based oils, providing excellent lubrication and stability.
Low SAPS Formulation: Preserves catalysts and the environment while maintaining outstanding engine performance.
Exceeds Industry Standards: Meets and exceeds API SM, CF; ACEA A3, B3, B4, C3 specifications, ensuring top-tier quality and reliability.

from

$6.99

Mobil Super 10W-40 synthetic blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus. (Or your vehicle’s OEM recommended oil change interval, whichever is longer. Some limitations apply, see Mobil Super Limited Warranty: https://www.mobil.com/en/lubricants/for-personal-vehicles/our-products/mobil-limited-warranties/mobil-super-limited-warranty)

Product Features:

Mobil Super synthetic blend motor oil 10W-40 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil ) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks
Manufacturer Part Number: 124402

from

$27.99

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

from

$25.99

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

1996 Volkswagen Passat Oil and Lubricants

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No.15980E)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)

Pentosin – HP 5W-30 Synthetic Engine Oil meets service class API SL/CL (Part No.8043107)

FRAM – 20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart (Part No.F650)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-40 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797977)

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

FRAM – 15W40 Conventional Heavy Duty Diesel Engine Oil, 1 Gallon (Part No.F645-1G)

Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)

FRAM – Conventional Heavy Duty 15W-40 Motor Oil: 2.5 Gallon (Part No.F645-2.5G)

Quaker State – 10W-40 Motor Oil 5 Quart (Part No.550044961)

Quaker State – 10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart (Part No.550034964)

Mobil 1 – 10W-40 High Mileage Full Synthetic Engine Oil, 1 Quart (Part No.14993)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt (Part No.15906E)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No.15980E)

Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15B6FE)

Mobil 1 – FS European Car Formula Full Synthetic Engine Oil 0W-40, 5 Quart (Part No.54526)

Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.1598B1)

Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil, 5 Quart (Part No.1597B0)

Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)

Mobil 1 – FS European Car Formula 0W-40 Full Synthetic Motor Oil, 1 Quart (Part No.44962)

Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C7E)

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979F)

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)

Castrol – GTX 10W-30 Conventional Motor Oil, 5 Quarts (Part No.15B7AA)

Castrol – EDGE Euro 5W-30 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15484E)

Castrol – EDGE 5W-50 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C6F)

Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart (Part No.VV966)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)

Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart (Part No.154BC4)

Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts (Part No.15A66C)

Pennzoil – Full Synthetic 5W-40 Engine Oil – Helps Extend Engine Life – 1 Qt Bottle (Part No.550051120)

Castrol – GTX 10W-30 Conventional Motor Oil, 1 Quart (Part No.15B400)

Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)

Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.1598B6)

LIQUI MOLY – TopTec 4200 Long Life 5W-30 Full Synthetic Motor Oil: Long Life, Reduces Build Up, 5 Liter (Part No.2011)

Pennzoil – Platinum Euro 5W-40 Full Synthetic Engine Oil, 1 Quart (Part No.550040834)

Castrol – GTX 20W-50 Conventional Motor Oil, 5 Quarts (Part No.15984B)

Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152E4E)

Pentosin – HP 5W-30 Synthetic Engine Oil meets service class API SL,CL (Part No.8043206)

Castrol – GTX 20W-50 Conventional Motor Oil, 1 Quart (Part No.151A8E)

Castrol – GTX 10W-40 Conventional Motor Oil, 1 Quart (Part No.14CD5A)

Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979B)

Castrol – EDGE High Mileage 10W-40 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15989F)

Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)

Pentosin – Super Performance III 5W-30 Full Synthetic Motor Oil, Exceeds API SM,CF; ACEA A3,B3,B4,C3, 1 Liter (Part No.8078106)

Pentosin – HP II 5W-40 Synthetic Engine Oil exceeds service class API SM ACEA A3,B4 (Part No.8042107)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-40 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797977)

Castrol – GTX 10W-40 Conventional Motor Oil, 5 Quarts (Part No.15982E)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart (Part No.779462)

Castrol – EDGE Full Synthetic Motor Oil, 10W-60 (1 Quart) (Part No.12064/12535)

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98008)

Mobil Super – 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98010)

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.97025)

Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15906F)

Pentosin – HP 5W-30 Synthetic Engine Oil meets service class API SL/CL (Part No.8043107)

Pentosin – Super Performance III 5W-30 Full Synthetic Motor Oil, Exceeds API SM,CF; ACEA A3,B3,B4,C3, 5 Liter (Part No.8078206)

Mobil Super – Super 10W-40 Synthetic Blend Motor Oil, 1 Quart (Part No.97026)

FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

Quaker State – 10W-40 Motor Oil 5 Quart (Part No.550044961)

Quaker State – 10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart (Part No.550034964)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)