1996 Volkswagen Jetta Exhaust Mufflers
More 1996 Volkswagen Jetta Exhaust Mufflers
Find your specific 1996 Volkswagen Jetta original or aftermarket Exhaust Mufflers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1996 Volkswagen Jetta Exhaust Mufflers
HJS – Exhaust Gasket (Part No.H4000125941HJS)
from
$9.72
Exhaust Gasket
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55636)
from
$476.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942042)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18470)
from
$106.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.53930)
from
$679.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54889)
from
$817.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55264)
from
$464.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.53949)
from
$592.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842452)
from
$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)
from
$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
Walker – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52171)
from
$211.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION – Internal drainage system helps reduce moisture collection
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18975)
from
$245.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942452)
from
$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Popular 1996 Volkswagen Jetta Exhaust Mufflers Categories
1996 Volkswagen Jetta Exhaust Mufflers
Maybe you’re in the middle of a full rebuild of that 1996 Volkswagen Jetta. Maybe you just need a couple of Exhaust Mufflers. Either way, Advance Auto Parts has 6 different Exhaust Mufflers in our inventory ranging from $9.72 to $227.99. That means you can find the exact parts or products you need to keep that 1996 Volkswagen Jetta running smoothly.
Exhaust Mufflers are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Volkswagen Jetta. Walker, Flowmaster Inc., and HJS are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Mufflers for your 1996 Volkswagen Jetta, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Mufflers to keep your 1996 Volkswagen Jetta rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Mufflers Brands To Make Your 1996 Volkswagen Jetta Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Volkswagen Jetta demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Mufflers make up Advance Auto Parts’ inventory, and all are ready to help make your Jetta the best it can be. Be sure to browse some of our top Exhaust Mufflers brands and parts.
Popular Walker Exhaust Mufflers
We carry Walker parts in our stock across Mufflers categories, plus more. For a 1996 Volkswagen Jetta, our most popular Walker Exhaust Mufflers include:
from
$211.99
(4)
Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance
Mufflers
FAQs for 1996 Volkswagen Jetta Exhaust Mufflers
What are the most purchased Exhaust Mufflers for the 1996 Volkswagen Jetta?
Out of 6 Exhaust Mufflers for the 1996 Volkswagen Jetta, the most popular in our inventory are:
from
$227.99
This product is not rated
DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound
Mufflers
from
$169.99
This product is not rated
50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Mufflers
from
$139.99
This product is not rated
50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
Mufflers
