1996 Peterbilt 330 Brake Parts
Find Your Specific 1996 Peterbilt 330 Brake Parts
Below you will find various in-demand Peterbilt Brake Parts, components and accessories for your 1996 330. Advance Auto Parts has popular 330 parts like Brake Pads and Shoes Air Brake Parts and more. You’ll also find aftermarket and OEM Brake Parts for other 330 model years including
2010,
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018 and more. Select a category of 1996 Peterbilt 330 Brake Parts below and start saving instantly.
Popular 1996 Peterbilt 330 Brake Parts Categories
Essential Brake Parts for 1996 Peterbilt 330s
Dorman – HD Solutions – Air Tank Reservoir (Part No.924-5831)
from
$526.99
Maintain the effectiveness of air-actuated braking and suspension systems by replacing a corroded or leaking air tank with a new reservoir. Designed to fit like the original equipment tank with same port configurations.
Product Features:
See More
Product Features:
- Direct replacement – this air reservoir features the same port configuration and physical dimensions as the original tank.
- Quality construction – this tank is made with precise port locations and finished in a corrosion-resistant coating inside and outside
- Validation tested – has been salt spray chamber tested internally and externally to meet or exceed industry standard for corrosion resistance
- Excellent value – original equipment quality at a lower cost
Dorman – HD Solutions – Air Tank Reservoir (Part No.924-5830)
from
$527.99
Maintain the effectiveness of air-actuated braking and suspension systems by replacing a corroded or leaking air tank with a new reservoir. Designed to fit like the original equipment tank with same port configurations.
Product Features:
See More
Product Features:
- Direct replacement – this air reservoir features the same port configuration and physical dimensions as the original tank.
- Quality construction – this tank is made with precise port locations and finished in a corrosion-resistant coating inside and outside
- Validation tested – has been salt spray chamber tested internally and externally to meet or exceed industry standard for corrosion resistance
- Excellent value – original equipment quality at a lower cost
Carquest Premium – Desiccant Air Dryer Spin-on (Part No.99182)
from
$369.99
Carquest air breathers prevent contamination and water created from fluctuations in the reservoir from entering the system, ensuring proper equipment operation and helping to prevent premature parts wear.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Grease Tube
Carquest Premium – Desiccant Air Dryer (Part No.99183)
from
$172.99
Carquest air breathers prevent contamination and water created from fluctuations in the reservoir from entering the system, ensuring proper equipment operation and helping to prevent premature parts wear.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Threaded Stud: 5/8-11Grease Tube
Carquest Premium – Desiccant Air Dryer Spin-on (Part No.96327)
from
$128.99
Carquest air breathers prevent contamination and water created from fluctuations in the reservoir from entering the system, ensuring proper equipment operation and helping to prevent premature parts wear.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD786AH)
from
$52.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD380)
from
$45.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD184)
from
$88.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD786A)
from
$62.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD225H)
from
$71.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD786)
from
$62.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD225)
from
$44.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD786)
from
$44.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD225)
from
$88.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD786H)
from
$52.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD184H)
from
$71.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Upgrade your 1996 Peterbilt 330 with Top-Quality Brake Parts
When it comes to maintaining or upgrading your 1996 Peterbilt 330, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Peterbilt or enhancing its overall performance, Brake Parts are key to keeping your 330 functioning at its best. At Advance Auto Parts, we offer a wide selection of 11 Brake Parts for the 1996 Peterbilt 330, designed to meet your needs without breaking the bank.
From
Brake Pads and Shoe
replacements to
Air Brake Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1996 Peterbilt 330 at great prices.
Our Brake Parts inventory for this model
ranges from just $44.99 to $527.99, with
an average price of $175.30.
Our 11 Brake Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1996 Peterbilt 330 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1996 Peterbilt 330 is always ready to roll. We’re committed to providing you with everything you need to keep your 330 in top shape, all in one place.
Start shopping confidently below for your 1996 Peterbilt 330!
Best-Selling Brake Pads and Shoes for 1996 Peterbilt 330s
Enhance the driving experience in your Peterbilt with 7 quality Brake Pads and Shoe components, starting at $44.99.
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD184H)
from
$71.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD380)
from
$45.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD184)
from
$88.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Professional Platinum – Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (Part No.PMD225H)
from
$71.99
Carquest Professional Platinum Truck/SUV brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Frontline – Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (Part No.FLD225)
from
$88.99
Carquest Frontline brake pads provide maximum braking performance on towing, heavy hauling and frequent braking applications. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Frontline brake pads utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Frontline brake pads are the ideal choice for severe duty applications that need strong stopping power.
Product Features:
See More
Product Features:
- Severe duty friction formulations dissipate heat faster for extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD225)
from
$44.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
ACDelco – Semi-Metallic Disc Brake Pad Set (Part No.17D184MH)
from
$125.99
ACDelco Gold (Professional) Semi-Metallic Disc Brake Pads are a high quality alternative to Original Equipment (OE) parts. These brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor’s surface while offering premium braking power. They are a high quality replacement for many vehicles on the road today. Noise-dampening shims are included where applicable. Also, no curing is required. Independently tested using SAE J2784 standards. ACDelco Gold (Professional) Semi-Metallic Brake Pads are ready to be installed right out of the box. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Abutment clips and shims where applicable feature a rubberized coating for quiet operation
- Premium chamfers and slots match up with GM original equipment
- Mechanical Retention System backing plates used when possible for shear strength and are galvanized to resist corrosion
- Tested to AMP3 standards for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Most Popular 1996 Peterbilt 330 Air Brake Parts
Customize your Peterbilt with 4 Air Brake Parts products
like Air Brake Dryer Desiccant Cartridges and
Air Brake Reservoirs, all
priced under $527.99.
Carquest Premium – Desiccant Air Dryer Spin-on (Part No.96327)
from
$128.99
Carquest air breathers prevent contamination and water created from fluctuations in the reservoir from entering the system, ensuring proper equipment operation and helping to prevent premature parts wear.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Carquest Premium – Desiccant Air Dryer (Part No.99183)
from
$172.99
Carquest air breathers prevent contamination and water created from fluctuations in the reservoir from entering the system, ensuring proper equipment operation and helping to prevent premature parts wear.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Threaded Stud: 5/8-11Grease Tube
Dorman – HD Solutions – Air Tank Reservoir (Part No.924-5830)
from
$527.99
Maintain the effectiveness of air-actuated braking and suspension systems by replacing a corroded or leaking air tank with a new reservoir. Designed to fit like the original equipment tank with same port configurations.
Product Features:
See More
Product Features:
- Direct replacement – this air reservoir features the same port configuration and physical dimensions as the original tank.
- Quality construction – this tank is made with precise port locations and finished in a corrosion-resistant coating inside and outside
- Validation tested – has been salt spray chamber tested internally and externally to meet or exceed industry standard for corrosion resistance
- Excellent value – original equipment quality at a lower cost
Dorman – HD Solutions – Air Tank Reservoir (Part No.924-5831)
from
$526.99
Maintain the effectiveness of air-actuated braking and suspension systems by replacing a corroded or leaking air tank with a new reservoir. Designed to fit like the original equipment tank with same port configurations.
Product Features:
See More
Product Features:
- Direct replacement – this air reservoir features the same port configuration and physical dimensions as the original tank.
- Quality construction – this tank is made with precise port locations and finished in a corrosion-resistant coating inside and outside
- Validation tested – has been salt spray chamber tested internally and externally to meet or exceed industry standard for corrosion resistance
- Excellent value – original equipment quality at a lower cost
FAQs for 1996 Peterbilt 330 Brake Parts
Which Brake Parts are best-sellers for 1996 Peterbilt 330s?
Out of 11 Brake Parts that fit 1996 Peterbilt 330s, the following parts are the top sellers:
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (10866457) – $71.99
- Brake Pads: Reliable and Dependable Stopping (5754097) – $45.99
- Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (10115844) – $88.99
What’s the price range for 1996 Peterbilt 330 Brake Parts?
Brake Part prices for the 1996 Peterbilt 330 start at $44.99 and go up to $527.99 for the most premium parts.
What’s the average price of a Brake Part for a 1996 Peterbilt 330?
The average price for Brake Parts for the 1996 Peterbilt 330 is $175.30. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Brake Parts for other Peterbilt 330 model years?
What are the cheapest Brake Parts for my 1996 Peterbilt 330?
The cheapest 1996 Peterbilt 330 Brake Parts we carry in stock are:
- Brake Pads: Reliable and Dependable Stopping (19750045) – $44.99
- Brake Pads: Reliable and Dependable Stopping (5754097) – $45.99
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (10866457) – $71.99
- Brake Pads: With Hardware, Semi-metallic, Better Performance, Quiet (10866455) – $71.99
- Severe Duty Brake Pads: With Hardware, Semi-metallic, Ideal for Heavy Towing (10115844) – $88.99
What types of Brake Parts do you sell for my 1996 Peterbilt 330?
As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1996 Peterbilt 330:
Can I get help with 1996 Peterbilt 330 Brake Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Peterbilt Brake Parts and more.
What is your return policy for Peterbilt 330 Brake Parts?
Advance Auto Parts keeps returns simple. For new Peterbilt 330 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
