1996 Mercedes-Benz SL500 Cooling and Climate Controls
Find Your Specific 1996 Mercedes-Benz SL500 Cooling and Climate Controls
Below you will find various in-demand Mercedes-Benz Cooling and Climate Controls, components and accessories for your 1996 SL500. Advance Auto Parts has popular SL500 parts like Blower Motor and Related Products, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other SL500 model years including
1998,
1999,
2000,
2001,
2002,
2003,
2004,
2005,
2006 and more. Select a category of 1996 Mercedes-Benz SL500 Cooling and Climate Controls below and start saving instantly.
Popular 1996 Mercedes-Benz SL500 Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 1996 Mercedes-Benz SL500s
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Behr – Blower Motor (Part No.R203166429BEH)
from
$302.44
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.
Product Features:
See More
Product Features:
- OEM Quality.
- Direct Fit Replacement.
- Highly efficient
- Quiet-running
- Meets or exceeds OE design and performance.
Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G5010112881BEH)
from
$167.98
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.
Product Features:
See More
Product Features:
- Out of box, drop in replacements
- Factory mounts for easy install
- Exact fit
- Reduced labor time
- Higher customer satisfaction
Carquest Premium – Blower Motor: With Wheel (Part No.75898)
from
$152.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – A/C Tube and Fin Evaporator (Part No.T54128)
from
$199.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.14569)
from
$49.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
ACM – A/C Hose, Hansa (Part No.R102073286ACM)
from
$716.04
ACM is a supplier of Original Equipment quality climate control products. Suction.
See More
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3658)
from
$299.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)
from
$19.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-310)
from
$183.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
- Complete package – assembly is designed with the same materials and components as the original part.
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)
from
$6.13
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More
Febi – Rivet (Part No.Q20011324407FEB)
from
$2.02
Rivet
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)
from
$119.99
Trimline Straight Blade Electric Fan
CRP – Thermostat O-Ring (Part No.G403032487)
from
$2.29
Thermostat O-Ring
MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C31633)
from
$2.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Autopart International Inc – A/C Compressor (Part No.R10003200491API)
from
$355.06
A/C Compressor
Beck/Arnley – Water Pump Gasket (Part No.039-4177)
from
$9.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Metal where applicable
- Quality construction for durability
- Packaged in clear plastic for easy visibility and identification of all components
- Application specific for this vehicle
Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1502)
from
$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Santech – A/C Pressure Switch (Part No.R1054178181SII)
from
$20.70
A/C Pressure Switch
Behr – Radiator Drain Plug (Part No.G106034117BEH)
from
$8.14
Radiator Drain Plug
Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)
from
$8.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)
from
$54.53
ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.
See More
Rein – Thermostat Insert 80C (Part No.CTI0019)
from
$14.99
Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Matches original equipment design specifications
- All gaskets or seals necessary for installation are supplied with thermostats
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Thermostat set to 80 degrees Celsius to maintain optimal running temperature
Rein – Water Pump- Metal Impeller (Part No.WPR0017)
from
$129.99
Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.
Product Features:
See More
Product Features:
- Pump is produced with silicon carbide seals providing improved durability and service life
- Pump uses OE designed bearings by ensuring to extend pumps service life
- Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty
Carquest Premium – A/C Filter Drier (Part No.T33389)
from
$28.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)
from
$1.61
Rivet, Plastic Spread Rivet
Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)
from
$46.66
A/C ACC Temp Sensor
Upgrade your 1996 Mercedes-Benz SL500 with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 1996 Mercedes-Benz SL500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your SL500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Cooling and Climate Controls for the 1996 Mercedes-Benz SL500, designed to meet your needs without breaking the bank.
From
Blower Motor and Related Product
replacements to
Air Conditioning Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1996 Mercedes-Benz SL500 at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $0.99 to $716.04, with
an average price of $110.82.
Our 55 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 1996 Mercedes-Benz SL500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Mercedes-Benz SL500, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like Permatex Carquest Premium, and more.
Permatex Cooling and Climate Controls
start at just $6.99 and boast an impressive 5 stars average rating from customers.
With 316 customer reviews and counting, our 1996 Mercedes-Benz SL500 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1996 Mercedes-Benz SL500 is always ready to roll. We’re committed to providing you with everything you need to keep your SL500 in top shape, all in one place.
Start shopping confidently below for your 1996 Mercedes-Benz SL500!
Best-Selling Blower Motor and Related Products for 1996 Mercedes-Benz SL500s
Enhance the driving experience in your Mercedes-Benz with 1 quality Blower Motor and Related Product components, starting at $218.04.
APA/URO Parts – Blower Motor (Part No.R203166429APA)
from
$218.04
Blower Motor
Most Popular 1996 Mercedes-Benz SL500 Air Conditioning Parts
Customize your Mercedes-Benz with 22 Air Conditioning Parts products
like AC Compressor Without Clutch,
Expansion Valve and Orifice Tubes, and
Accumulator and Receiver Driers, all
priced under $716.04.
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39210)
from
$29.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Factory Air – Green Round O-Ring (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Green Round O-Ring (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)
from
$54.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Behr – A/C Pressure Switch (Part No.R1054178181BEH)
from
$35.56
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More
ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)
from
$54.53
ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.
See More
ACM – A/C Hose, Hansa (Part No.R102073286ACM)
from
$716.04
ACM is a supplier of Original Equipment quality climate control products. Suction.
See More
Behr – A/C Evaporator (Part No.R113066129BEH)
from
$587.56
A/C Evaporator
DENSO – New Compressor With Clutch (Part No.471-1227)
from
$385.99
As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Carquest Premium – New Compressor with Clutch, Nippondenso 10PA17C (Part No.T58336)
from
$334.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Validated for fit, form, and function to OE standards
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3658)
from
$299.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57336)
from
$261.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
ACM – ACM A/C Receiver Drier (Part No.R1040148407ACM)
from
$206.63
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meets or exceeds the vehicle manufacturer specifications.
- Utilizes factory style fittings and connectors.
- Includes the required o-rings and associated hardware
Carquest Premium – A/C Tube and Fin Evaporator (Part No.T54128)
from
$199.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ABA1074)
from
$135.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Autopart International Inc – A/C Expansion Valve (Part No.R10453349390API)
from
$45.11
A/C Expansion Valve
Carquest Premium – A/C Filter Drier (Part No.T33390)
from
$36.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
KAI – A/C Expansion Valve, L6 Engine (Part No.ACX011004)
from
$35.99
New Standard Replacement A/C Expansion Valve, L6 Engine
Product Features:
See More
Product Features:
- L6 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – HVAC Pressure Switch (Part No.ACA1572)
from
$27.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
- All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
Carquest Premium – HVAC Pressure Switch (Part No.ACA1672)
from
$23.29
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
- All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
Santech – A/C Pressure Switch (Part No.R1054178181SII)
from
$20.70
A/C Pressure Switch
ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)
from
$6.13
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More
Top Picks for 1996 Mercedes-Benz SL500 Engine Cooling Parts
Upgrade Mercedes-Benz SL500s with top-quality Engine Cooling Parts parts, including 31 OEM and aftermarket selections for your 1996 model.
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)
from
$9.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C31633)
from
$2.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)
from
$8.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Rein – Cap-Expansion Tank (Part No.CPE0026P)
from
$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Carquest Premium – Integrated Thermostat Housing: With Seal, 176 Degrees (Part No.14598)
from
$49.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Beck/Arnley – Thermostat, 195 Degrees Fahrenheit (Part No.143-0636)
from
$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
- Constructed with premium materials for durability
- Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
- Application specific for this vehicle
Rein – Radiator Cap (Part No.G101030351RIN)
from
$16.62
Radiator Cap
Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)
from
$519.99
X-Treme S-Blade Electric Fan
Bosch – Auxiliary Water Pump (Part No.G305028293BOS)
from
$203.61
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.
Product Features:
See More
Product Features:
- OE Quality, reliability and service life
- Leak-proof sealing of the drive
- Fuel savings and reduced emissions
- Cooling even without operation of the engine
- CO²-reduction by optimized efficiency, speed control and reduced weight
- Coverage of a wide hydraulic performance range
- Reduced noise level
Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-310)
from
$183.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
- Complete package – assembly is designed with the same materials and components as the original part.
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Autopart International Inc – Fan Clutch (Part No.G50101903944API)
from
$180.76
Fan Clutch
Carquest Premium – New Premium Water Pump (Part No.T3119)
from
$145.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.
Product Features:
See More
Product Features:
- This pump is used on accessory belt driven applications
- All gaskets or seals necessary for installation are supplied with pump
- Durable housing features precisely machined mounting surfaces for proper sealing
- The latest impeller upgrades engineered for maximum coolant flow
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – Universal Standard Rotation Thermal Standard Duty Fan Clutch (Part No.215079)
from
$137.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Graf – Water Pump (Part No.G3000948653GRA)
from
$129.20
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.
Product Features:
See More
Product Features:
- All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
- The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
- The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
- The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
- On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
- After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)
from
$119.99
Trimline Straight Blade Electric Fan
Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 176 Degrees (Part No.902-5144)
from
$58.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)
from
$46.66
A/C ACC Temp Sensor
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1502)
from
$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Rein – Cap-Expansion Tank (Part No.CPE0029P)
from
$29.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Worldpac – EXPANSION TANK CAP (Part No.G10403566322BEH)
from
$20.03
EXPANSION TANK CAP
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)
from
$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Behr – Radiator Drain Plug (Part No.G106034117BEH)
from
$8.14
Radiator Drain Plug
APA/URO Parts – Radiator Cap (Part No.G101030351APA)
from
$7.65
Radiator Cap
MAHLE Original – Water Pump Gasket (Part No.K32290)
from
$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
CRP – Thermostat O-Ring (Part No.G403032487)
from
$2.29
Thermostat O-Ring
Febi – Rivet (Part No.Q20011324407FEB)
from
$2.02
Rivet
Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)
from
$1.61
Rivet, Plastic Spread Rivet
In-Demand Heating Parts for 1996 Mercedes-Benz SL500s
Select from 1 premium Heating Parts parts for your 1996 Mercedes-Benz SL500.
Behr – Blower Motor (Part No.R203166429BEH)
from
$302.44
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.
Product Features:
See More
Product Features:
- OEM Quality.
- Direct Fit Replacement.
- Highly efficient
- Quiet-running
- Meets or exceeds OE design and performance.
Top-Rated Cooling and Climate Controls Brands For Your 1996 Mercedes-Benz SL500
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1996 Mercedes-Benz SL500s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 1996 SL500 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 1996 Mercedes-Benz SL500 Cooling and Climate Controls
When it comes to maintaining or upgrading your 1996 Mercedes-Benz SL500, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1996 Mercedes-Benz SL500. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$26.99
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
“it worked great,thank you marv and your crew.”
Popular Carquest Premium 1996 Mercedes-Benz SL500 Cooling and Climate Controls
Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1996 Mercedes-Benz SL500 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1996 SL500, Advance Auto Parts carries a full inventory of 16 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $8.79 to $334.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 1996 Mercedes-Benz SL500 Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 1996 Mercedes-Benz SL500s?
Out of 55 Cooling and Climate Controls that fit 1996 Mercedes-Benz SL500s, the following parts are the top sellers:
- Radiator Cap: 20 PSI (17110023) – $8.79
- Radiator Cap: 20 PSI (10049228) – $9.49
- Green Round O-Ring (18890169) – $1.99
What’s the price range for 1996 Mercedes-Benz SL500 Cooling and Climate Controls?
Cooling and Climate Control prices for the 1996 Mercedes-Benz SL500 start at $0.99 and go up to $716.04 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 1996 Mercedes-Benz SL500?
The average price for Cooling and Climate Controls for the 1996 Mercedes-Benz SL500 is $110.82. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz SL500 model years?
What are the cheapest Cooling and Climate Controls for my 1996 Mercedes-Benz SL500?
The cheapest 1996 Mercedes-Benz SL500 Cooling and Climate Controls we carry in stock are:
- Green Round O-Ring (18890254) – $0.99
- Rivet, Plastic Spread Rivet (11033756) – $1.61
- Green Round O-Ring (18890169) – $1.99
- Rivet (12026625) – $2.02
- Thermostat O-Ring (10748538) – $2.29
What are the top-rated Cooling and Climate Controls that fit the 1996 Mercedes-Benz SL500?
Out of 316 reviews by customers, our 1996 Mercedes-Benz SL500 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1996 Mercedes-Benz SL500 and their top-rated products:
- Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Radiator Cap: 20 PSI (10049228) – $9.49
- Engine Coolant Thermostat Housing Gasket (10307383) – $2.49
- Air Conditioning Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Radiator Cap: 20 PSI (10049228) – $9.49
- Engine Coolant Thermostat Housing Gasket (10307383) – $2.49
What types of Cooling and Climate Controls do you sell for my 1996 Mercedes-Benz SL500?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1996 Mercedes-Benz SL500:
Can I get help with 1996 Mercedes-Benz SL500 Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.
What is your return policy for Mercedes-Benz SL500 Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz SL500 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
