1996 Mercedes-Benz C220 Fuel and Emissions Systems
Find Your Specific 1996 Mercedes-Benz C220 Fuel and Emissions Systems
Below you will find various in-demand Mercedes-Benz Fuel and Emissions Systems, components and accessories for your 1996 C220. Advance Auto Parts has popular C220 parts like Oxygen Sensors, Gas Caps, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other C220 model years including
1994
1995 and more. Select a category of 1996 Mercedes-Benz C220 Fuel and Emissions Systems below and start saving instantly.
Popular 1996 Mercedes-Benz C220 Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1996 Mercedes-Benz C220s
Delphi – Electric Fuel Pump (Part No.FE0693)
from
$371.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Febi – Ambient Temp Sensor (Part No.P4025378043FEB)
from
$25.65
Ambient Temp Sensor
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Blau – Fuel Tank (Gas) Cap (Part No.E201088909BLA)
from
$41.32
Blau Fuel Tank Caps are manufactured to meet OE quality, and performance for reliable operation.
Product Features:
See More
Product Features:
- Meets OE vehicle standards
- Factory type retaining strap for user convenience
- OE quality seal ensures fuel tank emissions are maintained preventing check engine warnings.
Delphi – Mass Air Flow Sensor (Part No.AF10341)
from
$389.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
APA/URO Parts – Vacuum Hose Connecto (Part No.B202573187APA)
from
$5.28
Vacuum Hose Connecto
Elring – Fuel Injector Seal (Part No.C1010681908ELR)
from
$2.51
Fuel Injector Seal
Delphi – Fuel Tank Sending Un (Part No.E2030116791DEL)
from
$257.31
Fuel Tank Sending Un
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11189-02)
from
$32.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Pump Relay (Part No.RAA1915)
from
$64.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Elaplast – Crankcase Breather Hose (Part No.B201072132ELA)
from
$9.30
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Pierburg – Vacuum Change Over Valve (Part No.O404570190APG)
from
$121.49
Vacuum Change Over Valve
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Beck/Arnley – Relay (Part No.203-0177)
from
$63.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with high quality materials for internal coil and switch
- Includes anti-corrosion terminals
- Constructed to withstand an underhood environment
- Application specific for this vehicle
Bosch – Fuel Injector Seal (Part No.C101016838BOS)
from
$2.06
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1261)
from
$99.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Bosch – Bosch Fuel Pressure Regulator (Part No.C300053377BOS)
from
$89.69
An essential part of the Fuel System, the Fuel Pressure Regulators’ sole purpose is to maintain fuel pressure at a constant differential to manifold vacuum under all engine load conditions.
Product Features:
See More
Product Features:
- Corrosion resistant housing material
- Premium diaphragm materials for longer service life
- Internal precision components maintain stable fuel pressure and ensure adequate fuel return
- Meets or exceeds OEM specifications
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4700)
from
$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Check Valve (Part No.E303027620BOS)
from
$29.20
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1085)
from
$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1935)
from
$44.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest – EGR Valve (Part No.EGR1862)
from
$446.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All stainless steel internal components and fully encapsulated copper windings and connections on Our electronic EGR valves ensure precision operation and greater protection against the tough operating environment
- Our premium EGR valves are engineered and tested to ensure an extended service life
- Our EGR products contain feature rich design and componentry yielding market leadership performance
- BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC2221)
from
$767.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Elring – Oil Filter Insert Housing O-Ring (Part No.A6001771810ELR)
from
$2.89
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
Upgrade your 1996 Mercedes-Benz C220 with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1996 Mercedes-Benz C220, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your C220 functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Fuel and Emissions Systems for the 1996 Mercedes-Benz C220, designed to meet your needs without breaking the bank.
From
Oxygen Sensor
replacements to
Gas Caps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1996 Mercedes-Benz C220 at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $2.06 to $767.99, with
an average price of $103.48.
Our 45 Fuel and Emissions Systems in stock come from 18 trusted brands, so you’re sure to find the right part for your 1996 Mercedes-Benz C220 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Mercedes-Benz C220, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Carquest Premium, and more.
Carquest Premium Fuel and Emissions Systems
start at just $2.99 and boast an impressive 4 stars average rating from customers.
With 21 customer reviews and counting, our 1996 Mercedes-Benz C220 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1996 Mercedes-Benz C220 is always ready to roll. We’re committed to providing you with everything you need to keep your C220 in top shape, all in one place.
Start shopping confidently below for your 1996 Mercedes-Benz C220!
Best-Selling Oxygen Sensors for 1996 Mercedes-Benz C220s
Enhance the driving experience in your Mercedes-Benz with 3 quality Oxygen Sensor components, starting at $69.99.
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Exact Fit (Part No.15727)
from
$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4700)
from
$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15736)
from
$104.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Most Popular 1996 Mercedes-Benz C220 Gas Caps
Customize your Mercedes-Benz with 3 Gas Caps products
like Gas Caps, all
priced under $41.32.
Carquest Premium – Fuel Cap: 10843, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10843)
from
$19.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Blau – Fuel Tank (Gas) Cap (Part No.E201088909BLA)
from
$41.32
Blau Fuel Tank Caps are manufactured to meet OE quality, and performance for reliable operation.
Product Features:
See More
Product Features:
- Meets OE vehicle standards
- Factory type retaining strap for user convenience
- OE quality seal ensures fuel tank emissions are maintained preventing check engine warnings.
APA/URO Parts – Fuel Tank Cap (Part No.E2010273332APA)
from
$35.81
Fuel Tank Cap
Top Picks for 1996 Mercedes-Benz C220 Fuel Pumps
Upgrade Mercedes-Benz C220s with top-quality Fuel Pumps parts, including 9 OEM and aftermarket selections for your 1996 model.
Bosch – Turbine Electric Fuel Pump (Part No.E3000464893BOS)
from
$194.74
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.
Product Features:
See More
Product Features:
- OE-Equivalent Direct fit for easy installation.
- OE connections and fittings.
- Superior turbine pump design that virtually eliminates fuel pulsation.
- Precision, spin-balanced armature to reduce noise and vibration.
- Premium carbon brushes, utilizing advanced materials.
- Noise suppression coil that eliminates radio frequency interference.
- Illustrated step-by-step instructions are included.
Carquest Premium – Fuel Pump E2496064 (Part No.E2496064)
from
$191.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Delphi – Electric Fuel Pump (Part No.FE0693)
from
$371.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Pierburg – Electric Fuel Pump Assembly (Part No.E300152644APG)
from
$317.26
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles
Product Features:
See More
Product Features:
- Made in Europe – 100% from OE factories and thus OE Standard
- Optimal hot fuel supply properties and low noise level
- Online Service and Product Information
- Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
Autopart International Inc – Fuel Pump (Part No.E30002019304API)
from
$295.47
Fuel Pump
Autopart International Inc – Fuel Pump (Part No.E30001915313API)
from
$91.66
Fuel Pump
Carquest Premium – Fuel Pump Relay (Part No.RAA1915)
from
$64.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Bosch – Check Valve (Part No.E303027620BOS)
from
$29.20
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
In-Demand Air Flow Sensors for 1996 Mercedes-Benz C220s
Select from 3 premium Air Flow Sensors parts for your 1996 Mercedes-Benz C220, with prices ranging from $16.79 to $49.99.
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Febi – Ambient Temp Sensor (Part No.P4025378043FEB)
from
$25.65
Ambient Temp Sensor
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1534)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Most Sold 1996 Mercedes-Benz C220 Fuel Injectors
Explore our best-selling Mercedes-Benz parts for the 1996 C220 among 14 OEM and aftermarket options starting from $2.06.
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)
from
$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Bosch – Bosch Fuel Pressure Regulator (Part No.C300053377BOS)
from
$89.69
An essential part of the Fuel System, the Fuel Pressure Regulators’ sole purpose is to maintain fuel pressure at a constant differential to manifold vacuum under all engine load conditions.
Product Features:
See More
Product Features:
- Corrosion resistant housing material
- Premium diaphragm materials for longer service life
- Internal precision components maintain stable fuel pressure and ensure adequate fuel return
- Meets or exceeds OEM specifications
Delphi – Fuel Injection Pressure Regulator (Part No.FP10377)
from
$84.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1935)
from
$44.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Delphi – Mass Air Flow Sensor (Part No.AF10341)
from
$389.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1261)
from
$99.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1085)
from
$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11189-02)
from
$32.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-76944-01)
from
$17.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Bosch – Fuel Injector Seal Kit (Part No.C106016844BOS)
from
$10.99
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. This 5-piece kit contains 3 O-rings (black), 1 support ring (gray), and 1 protective cap (yellow). Use one kit per injector.
See More
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)
from
$3.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Bosch – Fuel Injector Seal (Part No.C101016838BOS)
from
$2.06
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Top-Rated Fuel and Emissions Systems Brands For Your 1996 Mercedes-Benz C220
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1996 Mercedes-Benz C220s. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1996 C220 start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1996 Mercedes-Benz C220 Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1996 Mercedes-Benz C220, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1996 Mercedes-Benz C220. With over 9 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $136.75. Plus, with over 12 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1996 Mercedes-Benz C220 Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1996 Mercedes-Benz C220s?
Out of 45 Fuel and Emissions Systems that fit 1996 Mercedes-Benz C220s, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (11906669) – $9.99
- Fuel Injector Seal Kit (11450096) – $2.99
What’s the price range for 1996 Mercedes-Benz C220 Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1996 Mercedes-Benz C220 start at $2.06 and go up to $767.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1996 Mercedes-Benz C220?
The average price for Fuel and Emissions Systems for the 1996 Mercedes-Benz C220 is $103.48. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Mercedes-Benz C220 model years?
What are the cheapest Fuel and Emissions Systems for my 1996 Mercedes-Benz C220?
The cheapest 1996 Mercedes-Benz C220 Fuel and Emissions Systems we carry in stock are:
- Fuel Injector Seal (10740455) – $2.06
- Fuel Injector Seal (11474383) – $2.51
- Oil Filter Insert Housing O-Ring (12073671) – $2.89
- Fuel Injector Seal Kit (11450096) – $2.99
- Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (11906761) – $3.29
What types of Fuel and Emissions Systems do you sell for my 1996 Mercedes-Benz C220?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1996 Mercedes-Benz C220:
Can I get help with 1996 Mercedes-Benz C220 Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Fuel and Emissions Systems and more.
What is your return policy for Mercedes-Benz C220 Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz C220 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
