1996 Jeep Cherokee Towing Products

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.

Product Features:

• For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
• Protects Tow Vehicle Electronics And Itself From Wiring Shorts
• Self-Resetting
• Includes 12 Ga. Power Lead Wire
• Includes Fuse/Fuse Assembly/Splices/Cable Ties
• Powers Up To 8.0 Amps Per Output
• Receives Power Directly From The Battery
• Includes Vehicle Side 4 Flat
• Includes Dust Cover And Grease Packet To Prevent Corrosion

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:

• For vehicles equipped with independent bulb turn signals or common bulb systems
• Protects tow vehicle electronics from wiring shorts
• Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
• Powers up to 5.0 amps per output
• Receives power directly from the battery
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:

• 60 in. Long
• Adapts Tow Vehicles Taillight System To The Trailers
• Powers Up To 2.1 Amps Per Output
• Double-Molded Weatherproof Design; Includes Dust Cover
• Corrosion Resistant Terminals
• Includes Splices And Terminal Grease
• Complete With Splices And Circuit Tester

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee KL (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 750 lbs. tongue weight
• Compatible with weight distribution hitch (6,000 lbs. WD / 750 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:

• Manufactured With A Vehicle-Specific Design For A Custom Fit
• Precisely-Welded For Superior Strength And Fit
• Co-Cured In A Rust-Resistant Liquid Bonderite Coating
• Strengthened With A Welded, Seamless Collar
• Open-Back Receiver For Easy Cleaning

Husky offers a full line of unique hitch models to provide a custom fit for nearly every vehicle on the road today. Husky receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry leading, rust resistant finish.

Product Features:

• Manufactured With A Vehicle Specific Design For A Custom Fit
• Precisely-Welded For Superior Strength And Fit
• Co Cured In A Rust Resistant Liquid Bonderite (R) Coating
• Strengthened With A Welded, Seamless Collar
• Open Back Receiver For Easy Cleaning

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

• Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
• Fits USCAR-equipped vehicles with factory tow plugs only
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
• Dust covers included to keep connectors clean when not in use
• Slit loom keeps wires contained and well protected
• Metal bracket securely mounts wiring to the vehicle or trailer hitch

The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:

• 60 inch length
• Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
• Double-molded weatherproof design
• Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
• Includes 4 wire flat extension
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

Tow more than one trailer? Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:

• Multi-Tow® provides multiple towing options from one connector
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Includes mounting bracket and hardware
• Impact and corrosion resistant
• Fits in standard 7 blade bracket
• Includes Step-By-Step Instructions

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

For use with 75 Series and HI Series winches.

Product Features:

• Winch Hydraulic Fittings

A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,000 lbs. GTW and 300 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Cherokee, Comanche and Wagoneer (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:

• Rated to 3,000 lbs. gross trailer weight and 300 lbs. tongue weight
• Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
• Made with a vehicle-specific design for a custom fit
• Provides a convenient mount for hitch accessories
• Ideal for attaching a snow plow, cargo carrier or other front hitch mount
• Allows for easy maneuvering of a trailer into a tight spot
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Tow more than one trailer? This exact OEM replacement Multi-Tow® design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:

• Multi-Tow® provides multiple towing options from one connector
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Impact and corrosion resistant
• Pre-greased terminals for added protection
• Includes Step-By-Step Instructions

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:

• Weather-resistant dust cover features a rubber insert to seal out moisture
• Spring-loaded cover also helps keep connector clean when not in use
• Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
• Simple plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power

By incorporating Endurance design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.

Product Features:

• Endurance Professional Grade
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Multi-Tow® provides multiple towing options from one connector
• Weatherproof lid opens 180 degrees
• Oversized hinge offers ultimate durability
• Superior Ergonomics
• For Use w/Factory Tow Package
• Impact And Corrosion Resistant

If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Jeep Cherokee, including Sport (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:

• Plugs into vehicle tail light assembly to provide a 4-way flat socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• Equipped with tail light converter for vehicle-trailer compatibility
• Constructed with SMT circuitry for better performance and durability
• Dust cover included to keep connector clean when not in use
• Backed by a limited one-year warranty

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24″ of bonded wire for easy splicing into your vehicle’s wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:

• Replaces damaged or missing USCAR vehicle harness
• Includes 24″ color-coded, bonded wires for easy installation

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:

• Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
• Simple plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• Spring-loaded dust cover keeps connector clean when not in use

Stress is the last thing you should feel when towing a trailer — whether you’re hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle’s wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM socket. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.

Product Features:

• Plugs into USCAR connection to add 4-way flat and retain use of existing socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• Dust cover included to keep connector clean when not in use
• Slit loom keeps wires contained and well protected

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty. Adapter sold separately, required for install.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty