from

$27.49

STRUT BELLOW

from

$54.63

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$11.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$31.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$21.49

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$16.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$32.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$21.32

The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$34.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$35.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$20.79

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability
Engineered to meet or exceed OE requirements
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$67.36

The CTR control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$154.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$53.74

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$37.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part
Quality construction – manufactured from same materials as original equipment for safety and reliability
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$97.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$92.53

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control. The KYB Excel-G is identical to the GR2 except for the product name and paint color.

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUV,s

from

$230.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$93.64

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control. The KYB Excel-G is identical to the GR2 except for the product name and paint color.

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUV,s

from

$106.52

The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control

Product Features:

Direct fit application for ease of installation
Calibrated to compensate for worn suspensions
Components and valving are designed specifically for each application
The best choice to restore OE performance and normal driving conditions
Built with quality that matches or exceeds OE
Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

from

$93.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

#1 recommended Original Equipment replacement choice for Asian cars
Specifically calibrated to help restore the original handling and control characteristics of your Infiniti G20
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Triple chrome plated piston rod and multi-lip oil seals that reduce wear
Features a precision, sintered iron strut rod guide to help retain correct wheel alignment
Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
To reduce the chance of noise and vibration KYB recommends installing new strut mounts, part number: SM5123
Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB101

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$14.49

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures