1996 GMC K1500 Performance and Racing Products

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1996 K1500. Advance Auto Parts has popular K1500 parts like Performance Engines, Performance Air Intake Kits, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other K1500 model years including 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999 and more. Select a category of 1996 GMC K1500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1996 GMC K1500 Performance and Racing Products Categories

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Shifters

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Engine Cylinder Head Gaskets

Performance Distributor Rotors

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Cover Gasket Sets

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Exhaust Tail Pipes

Performance Leaf Spring Bushings

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Brake Hose Kits

Performance Torque Converters

Performance Turbochargers

Performance Nitrous Systems

Essential Performance and Racing Products for 1996 GMC K1500s

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$174.99

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:

Thicker Than Stock Steel Plate
Ring Gear Securely Welded
Dual Bolt Patterns
Zinc-Dichromate Plated To Resist Corrosion
Withstands High Torque and RPM

from

$118.99

DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our excl usive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
Polished finish for a show quality shine
Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

from

$126.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available – ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

Product Features:

Pre-Assembled
Meets DOT Guidelines And Requirements
Legal In All 50 States
Stainless Steel Braided Hose
Zinc Plated Fittings

from

$89.99

Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:

Chrome plated
Grade 8
12-point head
AN washers with no exposed shoulder for a professional appearance

from

$99.99

Adds a dramatic amount of performance and durability to any vehicle. For cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made Of Superior Hyper-Flex Material
Adds Dramatic Amount Of Performance/Durability
Helps Vehicle Be In Control
Allows The Suspension To Function Properly

from

$52.99

A true performance application component for cars, trucks, hot rods and racing and competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.

Product Features:

Safety Interlock Design
Will Handle Any And All Torque
Outlasts And Outperforms Rubber
Replaces OE 15659675; 15732188

from

$53.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

from

$611.99

Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:

from

$255.99

Designed to replace the often crimped and restrictive OEM pipe that comes off the turbocharger outlet. Mandrel bent for maximum flow. Kits include necessary installation hardware.

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$17.49

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

from

$356.99

Magnum 1.52 Rocker and HE Pushrod Kit for Chevrolet 262-400 Small Block

from

$268.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$243.99

Product Features:

GM 10BL 8.5 R/P 2.73 FRT/REAR MGP

from

$29.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$37.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longevity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.
Not intended for use in emission controlled vehicles.

from

$88.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP DR-37
MSD 8226
Resist Corrosion
W/New Mounting Hardware

from

$84.99

ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:

Fits Most Stock And Modified Distributors
Brass inserts provide for high spark energy flow
Polyester Glass Filled For Durability
Heavy duty for maximum energy transfer

from

$367.99

The K&N AirCharger 63-1007-1 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1007-1 air intake places a round K&N high-flow air filter directly on top of the throttle body allowing large volumes of air to be pulled into the engine delivering a guaranteed gain in horse power. The oversized air filter is capped with an impressive chrome lid for added visual appeal under the hood. This air intake is relatively easy to install using commonly available tools. Not legal for sale or use in California on any pollution controlled motor vehicle.

Product Features:

Guaranteed horsepower gain
Designed to improve throttle response and engine sound
Free-flowing high density polyethylene tube
Replaces entire factory air intake system
K&N No-Hassle Lifetime Limited Warranty
Easy to install, usually in 60 minutes or less
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$49.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$121.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab To Bed Alignment
Replace To Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$255.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$42.99

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$261.99

Flow tech headers are the perfect combination of performance and value. Flow tech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 3/8″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance.

Product Features:

Fuel Economy From The Engine
Precision engineered for fit, performance and economy
Constructed of .049 cold roll flash mild steel tubing
Include All Mounting Hardware
Leakproof O-Ringed Port Seals
Mandrel-Formed Power Plenum
Leak Test For Max Performance

from

$64.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Upgrade your 1996 GMC K1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1996 GMC K1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your K1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Performance and Racing Products for the 1996 GMC K1500, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Air Intake Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1996 GMC K1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,076.99, with an average price of $269.51. Our 89 Performance and Racing Products in stock come from 20 trusted brands, so you’re sure to find the right part for your 1996 GMC K1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 GMC K1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like B & M, FEL-PRO Performance, Accel, and more. B & M Performance and Racing Products start at just $371.99 and boast an impressive 4.3 stars average rating from customers. FEL-PRO Performance and Accel also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.2 stars rating. With 774 customer reviews and counting, our 1996 GMC K1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 GMC K1500 is always ready to roll. We’re committed to providing you with everything you need to keep your K1500 in top shape, all in one place. Start shopping confidently below for your 1996 GMC K1500!

Best-Selling Performance Engines for 1996 GMC K1500s

Enhance the driving experience in your GMC with 27 quality Performance Engine components, starting at $23.99.

show more show less

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$255.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$255.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$51.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
Not intended for use in emission controlled vehicles.

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$921.99

Torque Converter – Traveler Converter with 2000 RPM Stall Speed APPLICATION: GM 4L80E The Traveler converter is intended for use in motorhomes, tow vehicles or other heavy duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. The Traveler is also stronger than a stock converter and has been internally modified to provide about 300 rpm more stall speed for help in initial acceleration without sacrificing normal highway operation. It is manufactured to B&M’s exacting tolerances for long life. Provides slightly higher stall speed than stock to improve pulling power at low speeds. Application: GM 4L80E Please download the attached 4L80E torque converter installation tips. New Precision pump drive tube Heavy duty needle bearings Furnace brazed New sprag and rollers in stator Pressure tested Fully balanced.

Product Features:

Ideal For Motor Homes
Ideal For Towing Applications
Precision Pump Drive Tube
Heavy Duty Needle Bearings
Furnace Brazed
New Sprag and Rollers In Stator
Pressure Tested
Fully Balanced

from

$921.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$819.99

Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$686.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$649.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Magnum 215/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Mild street performance. Slight lope at idle. Stock converter, aftermarket intake and headers. 3.40 to 4.10 gears.

Product Features:

Ultra Pro Magnum Self-Aligning Rocker Arm Set with 1.52 Ratio for V6 with 3/8" Stud

from

$399.99

These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, these rockers fit ’88+ Chevrolet V6 with a 3/8″ diameter stud.

Product Features:

from

$329.99

Any gasket can create a seal, but a good gasket can do it with reduced clamping force and for a long period of time. Edelbrock gaskets are manufactured with extremely high-quality materials and are specifically designed to fit Edelbrock intakes and cylind

Product Features:

Bulk intake gasket sets for Vortec/E-TEC small-block Chevy
Includes 10 sets

Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L

from

$312.99

Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L

Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L

from

$312.99

Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L

from

$89.99

Chrome plated
Grade 8
12-point head
AN washers with no exposed shoulder for a professional appearance

Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 7/16" Stud

from

$51.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, this rocker fits Chevrolet Small Block and V6 with a 7/16″ diameter stud.

Product Features:

Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 7/16" Stud

from

$51.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.6 ratio, this rocker fits Chevrolet Small Block and V6 with a 7/16″ diameter stud.

Product Features:

Ultra Pro Magnum Self-Aligning Rocker Arm with 1.52 Ratio for SBC/V6 with 3/8" Stud

from

$50.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, this rocker fits ’88+ Chevrolet Small Block and V6 with a 3/8″ diameter stud.

Product Features:

Most Popular 1996 GMC K1500 Performance Air Intake Kits

Customize your GMC with 3 Performance Air Intake Kits products like Engine Cold Air Intakes and Performance Air Intake Kits, all priced under $367.99.

show more show less

from

$367.99

K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your C1500, C2500, C35, C3500, K1500, K2500, K3500, Suburban 1500, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
áMADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.

from

$211.99

This Spectre air intake system for Chevrolet and GMC trucks is designed to get large horsepower and torque gains from select C1500, C2500, C3500, K1500, K2500 and K3500 models while working to protect your engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Chevy/GMC pickup engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$367.99

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

Top Picks for 1996 GMC K1500 Performance Ignition Products

Upgrade GMC K1500s with top-quality Performance Ignition Products parts, including 4 OEM and aftermarket selections for your 1996 model.

show more show less

from

$95.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$85.99

Used on 1996-1999 GM vehicles.

Product Features:

Direct performance replacement for GM Coil, 1996-1999
80:1 turns ratio and lower primary resistance produce high voltage output
Works with stock ignition as well as MSD Ignitions
CARB E.O. Approved

from

$34.49

3-wire for ignition box.

Product Features:

Service Part
Makes Connections Quick And Easy

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Product Features:

Classic good looks
High current / voltage output
Spark plug style terminal for excellent coil wire retention
Brass contact terminals
Mounting bracket included
Can be used on inductive and CD ignitions

In-Demand Performance Steering Products for 1996 GMC K1500s

Select from 8 premium Performance Steering Products parts for your 1996 GMC K1500, with prices ranging from $5.99 to $155.99.

show more show less

from

$121.99

Assures Longer Lasting Cab To Bed Alignment
Replace To Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$155.99

Assures Longer Lasting Cab To Bed Alignment
Replace To Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$43.49

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$6.29

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$155.99

Assures Longer Lasting Cab To Bed Alignment
Replace To Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$121.99

Assures Longer Lasting Cab To Bed Alignment
Replace To Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$6.29

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

Most Sold 1996 GMC K1500 Performance Exhaust Products

Explore our best-selling GMC parts for the 1996 K1500 among 13 OEM and aftermarket options starting from $28.99.

show more show less

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$101.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$118.99

Stainless steel construction for lifelong protection
Polished finish for a show quality shine
Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone

from

$441.99

These Flow tech headers fit 1996-1999 Chevy/GMC Truck, 1500/2500, 1996-1997 Suburban, 1996-1997 Tahoe/Yukon: 5.7L, Tube Size 1.5″ O.D., w/o A.I.R.; Silver Ceramic Coated; 50-State Legal header CARB EO #D-115-16.

Product Features:

This is a 50-State Legal header C.A.R.B. EO #D-115-16.
Sturdy 16 gauge tubing
Extra thick 3/8″ flanges for a leak-free seal
Designed as a direct fit replacement for factory exhaust manifolds
Will accommodate all emission control devices
Bolts directly to factory head pipe
Complete with premium gaskets and hardware

from

$82.99

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
Dyno proven to flow up to 700 SCFM

from

$357.99

These Flow tech headers fit 1996-1999 Chevy/GMC Truck, 1500/2500, 1996-1997 Suburban, 1996-1997 Tahoe/Yukon: 5.7L, Tube Size 1.5″ O.D., w/o A.I.R., Black Paint, 50-State Legal header CARB EO #D-115-16.

Product Features:

This is a 50-State Legal header C.A.R.B. EO #D-115-16.
Sturdy 16 gauge tubing
Extra thick 3/8″ flanges for a leak-free seal
Designed as a direct fit replacement for factory exhaust manifolds
Will accommodate all emission control devices
Bolts directly to factory head pipe
Complete with premium gaskets and hardware

from

$156.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$135.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$204.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$224.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Mild to stock exterior exhaust tone
Minimal interior resonance
Excellent choice for large displacement vehicles
Improved horsepower, torque and potential mileage improvement

from

$53.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

from

$169.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Durable fully welded 409 stainless steel
Deep aggressive exhaust note
Noticeable interior resonance
Excellent performance on high horsepower vehicles
No internal packing to blowout

Top-Rated Performance and Racing Products Brands For Your 1996 GMC K1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1996 GMC K1500s. Below you’ll find some of our best rated Performance and Racing Products from B & M, FEL-PRO Performance, and Accel, and more. Performance and Racing Products from these brands that fit a 1996 K1500 start at just $32.99 and are rated as high as 4.3 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular B & M 1996 GMC K1500 Performance and Racing Products

When it comes to maintaining or upgrading your 1996 GMC K1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. B & M ticks all of those boxes. We offer a wide selection of B & M Performance and Racing Products, specifically designed for the 1996 GMC K1500. With over 2 B & M brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $371.99, with an average price of just $455.99. Plus, with over 2 customer reviews and an average rating of 4.3 stars, you can trust that our B & M Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

Popular FEL-PRO Performance 1996 GMC K1500 Performance and Racing Products

FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1996 GMC K1500 owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1996 K1500, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $32.99 to $44.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $32.99

(2)

Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set

“Sealed as expected”

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“Racing application”

FAQs for 1996 GMC K1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1996 GMC K1500s?

Out of 89 Performance and Racing Products that fit 1996 GMC K1500s, the following parts are the top sellers:

Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (18290116) – $82.99
Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID (18370838) – $118.99
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49

What’s the price range for 1996 GMC K1500 Performance and Racing Products?

Performance and Racing Product prices for the 1996 GMC K1500 start at $5.99 and go up to $1,076.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1996 GMC K1500?

The average price for Performance and Racing Products for the 1996 GMC K1500 is $269.51. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC K1500 model years?

Yes, we currently carry Performance and Racing Products for 18 model years of GMC K1500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1998, 1997, 1995, 1994, 1993, 1992, 1991, and 1990.

What are the cheapest Performance and Racing Products for my 1996 GMC K1500?

The cheapest 1996 GMC K1500 Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360833) – $5.99
Tie Rod End Boot (Octagon) – 2-Pack (22906873) – $6.29
Tie Rod End Boot (Octagon) – 2-Pack (22906874) – $6.29
PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.99
Exhaust Manifold Gasket Set (19781778) – $28.99

What are the top-rated Performance and Racing Products that fit the 1996 GMC K1500?

Out of 774 reviews by customers, our 1996 GMC K1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1996 GMC K1500 and their top-rated products:

Performance Drivetrains
- Differential Ring And Pinion (10584326) – $342.99
Performance Air Intake Kits
- Differential Ring And Pinion (10584326) – $342.99
Performance Shifters
- Differential Ring And Pinion (10584326) – $342.99

What types of Performance and Racing Products do you sell for my 1996 GMC K1500?

As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1996 GMC K1500:

Can I get help with 1996 GMC K1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC K1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC K1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 GMC K1500 Performance and Racing Products

K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Washable Air Filter (Part No.57-3039)

Hays – Power Train (Part No.10-025)

Dynomax – Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17519)

Russell – Street Legal Brake Line Kits for 1988-1999 K1500, Braided Stainless Steel, Chevy (Part No.672370)

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Energy Suspension – Rear Spring Set (Part No.3.2128G)

Energy Suspension – Motor Mount (Part No.3.1152R)

Dynomax – Exhaust Tail Pipe 2.5 Inch Inlet OD 2.5 Inch Outlet OD (Part No.54021)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam For Oe Roller Sbc (Part No.08-602-8)

Flowmaster Inc. – Turbo Downpipe and Crossover Kit – Pipes Only – No Mufflers (Part No.17220)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102G)

Accel – Ignition/Electrical (Part No.130120)

Competition Cams – Magnum 1.52 Rocker and HE Pushrod Kit for Chevrolet 262-400 Small Block (Part No.RP1412-16)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885273)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5118R)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2912)

Accel – Gm 1984-95 Remote Supercoil (Part No.140011)

Accel – Chevy/Gmc Vortec V6 High Performance Distributor Cap (Part No.120142)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.63-1007-1)

Mr. Gasket – Intake Gasket (Part No.143)

Energy Suspension – Body Cab Mount Set (Part No.3.4116R)

Weiand – Action Plus Water Pumps (Part No.9208P)

FEL-PRO Performance – Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set (Part No.1411)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Flowtech – Standard Header (Part No.11530FLT)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Weiand – Action Plus Water Pumps (Part No.9240P)

Weiand – Action Plus Water Pumps (Part No.9208P)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

B & M – TRAVELER CONVERTER (Part No.70431)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

B & M – Holeshot 2400 (Part No.70441)

B & M – Holeshot 2400 (Part No.70419)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Competition Cams – Magnum 215/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-420-8)

Competition Cams – Ultra Pro Magnum Self-Aligning Rocker Arm Set with 1.52 Ratio for V6 with 3/8" Stud (Part No.1617-12)

Edelbrock – Intake Manifold Gasket for E-Tec 170 Small-Block Chevy (Part No.72358)

Competition Cams – Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L (Part No.18-123-4)

Competition Cams – Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L (Part No.18-115-4)

Mr. Gasket – Intake Bolt Kit (Part No.5003)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 7/16" Stud (Part No.1604-1)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 7/16" Stud (Part No.1605-1)

Competition Cams – Ultra Pro Magnum Self-Aligning Rocker Arm with 1.52 Ratio for SBC/V6 with 3/8" Stud (Part No.1617-1)

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-3013-2)

Spectre – Spectre Air Intake Kit (Part No.9903)

K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Washable Air Filter (Part No.57-3039)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Ignition Coil, GM, External Single-Connector, 1996-1997 (Part No.8231)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Hyper-Flex Polyurethane Body Cab Mount Set (Part No.3.4123G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Body Cab Mount Set (Part No.3.4122G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5136G)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102R)

Energy Suspension – Extra Cab Body Mounts (2WD/4WD) (Part No.3.4122R)

Energy Suspension – Pickup Body Mount Set (Part No.3.4123R)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102G)

FEL-PRO Performance – Perforated Steel Core with Anti-Stick Coating Exhaust Manifold Gasket Set (Part No.1444)

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)

Dynomax – Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17519)

Flowtech – EO Legal Headers (Part No.91832-1FLT)

Dynomax – Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17748)

Flowtech – EO Legal Headers (Part No.91832FLT)

Dynomax – Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17228)

Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043043)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Dynomax – Exhaust Tail Pipe 2.5 Inch Inlet OD 2.5 Inch Outlet OD (Part No.54021)