1996 GMC Jimmy Performance Ignition Products
More 1996 GMC Jimmy Performance Ignition Products
Find your specific 1996 GMC Jimmy original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1996 GMC Jimmy Performance Ignition Products
MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)
from
$76.99
When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement coil for GM 1996-1999
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)
from
$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Replacement Coil For GM Dual Connector Coil
- Improved Turns Ratio
- Lower Primary Resistance
- Bolt-In replacement coil
- Produce More Output Voltage
- Smooth Idle
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)
from
$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)
from
$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Solid State Electronics
- Dwell Control Circuit
Accel – GM Ext. Coil 90-95 Ign Module (Part No.35370)
from
$158.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM ignition systems with the externally mounted module. 1990 thru 1995.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Auto Ventshade (AVS) – Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.20004)
from
$69.99
The AVS Carflector® hood shield is custom molded with precision engineering to fit cars, CUVs, and SUVs. The AVS Carflector has a medium profile wrap design to provide excellent protection from road debris for the hood, fenders, and windshield. Off-the-hood design makes it easy for cleaning as well as car-wash safe. Easy to install by attaching with 3M(TM) automotive-grade adhesive or mechanical fasteners. Comes with a limited lifetime warranty. Whatever you drive, AVS has the variety of hoodshield styles to suite your design preferences and vehicle style.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- Medium profile, wrap-around design for Cars and CUVs
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke finish
- Easy, no-drill installation
Popular 1996 GMC Jimmy Performance Ignition Products Categories
1996 GMC Jimmy Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1996 GMC Jimmy. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 4 different Performance Ignition Products in our inventory ranging from $69.99 to $186.99. That means you can find the exact parts or products you need to keep that 1996 GMC Jimmy running smoothly.
Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1996 GMC Jimmy. MSD Ignition, Mallory, and Auto Ventshade (AVS) are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1996 GMC Jimmy, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1996 GMC Jimmy rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1996 GMC Jimmy Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 GMC Jimmy demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Jimmy the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular Mallory Performance Ignition Products
We carry Mallory parts in our stock across Performance Ignition Parts categories, plus more. For a 1996 GMC Jimmy, our most popular Mallory Performance Ignition Products include:
FAQs for 1996 GMC Jimmy Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1996 GMC Jimmy?
Out of 4 Performance Ignition Products for the 1996 GMC Jimmy, the most popular in our inventory are:
from
$69.99
This product is not rated
Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc
Performance Ignition Modules
