1996 GMC G3500 Suspension Parts

Essential Suspension Parts for 1996 GMC G3500s

Driveworks – Suspension Control Arm Bushing (Part No.DW-K6395)

Suspension Control Arm Bushing

from

$6.79
Driveworks control arm bushings are high-quality, cost-effective parts. They help prevent wear to more expensive or less easily replaced parts, and they absorb vibration that would be transmitted to the interior of the car. Driveworks chassis parts ensure improved steering response and durability to your vehicle.
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

Multi-Purpose Relay

from

$51.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 3600Lb, Aeon Hollow Rubber (Part No.GMRG35)

Rubber Spring, Inside Coil Spring Mount, 3600Lb, Aeon Hollow Rubber

from

$454.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Dorman – SHACKLE BUSHING (Part No.541-608)

SHACKLE BUSHING

from

$20.99
SHACKLE BUSHING

MOOG – Leaf Spring Bushing (Part No.SB351)

Leaf Spring Bushing

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Magnum RV Shock Absorber (Part No.555038)

Magnum RV Shock Absorber

from

$117.99
The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-3/8-inch (60.3 mm) reserve tube The 2″ (555xx Series) or 2-3/8′ (557xx Series) reserve tube holds more fluid or more consistent performance – when required
  • 1-3/8-inch (35 mm) or 1-3/4-inch (44.6 mm) bore The 1-3/8′ (555xx Series) or 1-3/4″ (557xx Series) bore is larger than most shocks to provide more efficient and consistent control – when required
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP15350)

Control Arm Shaft Kit

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

Driveworks – Control Arm with Ball Joint (Part No.DW-K6147)

Control Arm with Ball Joint

from

$21.99
Driveworks control arms are made to meet or exceed OE specifications, and the ball joint is preinstalled in the control arm. Driveworks chassis parts ensure improved steering response and durability.
See More

GM Genuine Parts – RELAY ASM-MULTIUSE (Part No.D1703A)

RELAY ASM-MULTIUSE

from

$9.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Multi Purpose Relay

from

$28.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MOOG – Coil Spring Insulator (Part No.K160045)

Coil Spring Insulator

from

$18.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Rare Parts – Coil Spring Insul (Part No.RP46346)

Coil Spring Insul

from

$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Dorman – Suspension Control Arm (Part No.527-398)

Suspension Control Arm

from

$56.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.527-397)

Suspension Control Arm

from

$56.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – U-Bolt Mounting Kit (Part No.RP19899)

U-Bolt Mounting Kit

from

$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Holds Round Lower Control Arm Shaft to the frame on Chevy & GMC Trucks
See More

Dorman – Rear Position Leaf Spring Shackle Kit (Part No.722-066)

Rear Position Leaf Spring Shackle Kit

from

$53.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle.
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life.
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

MOOG – Leaf Spring Shackle (Part No.K150404)

Leaf Spring Shackle

from

$63.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Body Bolt M6-1.0 x 25mm

from

$3.79
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards.
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34839)

Gas-Magnum Shock Absorber

from

$63.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Rancho – RS7MT Suspension Shock Absorber (Part No.RS77113)

RS7MT Suspension Shock Absorber

from

$101.99
Application tuned for precision on-road and off-road handling, Rancho RS7MT monotube shocks are highly effective in the dissipation of heat, making them ideal for extreme off-road use and larger wheel and tire packages. RS7MT shocks feature an integrated dirt wiper sealing system that keeps dirt and debris out, hardened piston rod that resists scuffs and corrosion plus an internal rebound bumper to smooth out your ride on any terrain.

Product Features:
  • PRECISE HANDLING AND PERFORMANCE — Deflective Disc Valving features digressive, linear or progressive tuning based on application requirements for precision handling and performance on- and off-road
  • STRONG AND DURABLE — Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
  • HANDLES EXTREME TEMPERATURE CHANGES — Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248░F
  • HANDLES EXTREME TEMPERATURE CHANGES — Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • REDUCES FADE — Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
  • SMOOTH PERFORMANCE — Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • THE RIGHT FIT — Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
  • KEEPS DIRT AND DEBRIS OUT — Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
  • BUILT TO LAST — Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling; for extra protection, purchase shock boot RS1952 or RS1961
  • BOLD APPEARANCE — Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
See More

Rancho – RS5000X Shock Absorber (Part No.RS55116)

RS5000X Shock Absorber

from

$96.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

Dorman – Suspension Leaf Spring (Part No.22-901)

Suspension Leaf Spring

from

$461.99
Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.

Product Features:
  • Suspension Leaf Spring
  • Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.
  • Ideal replacement – this leaf spring matches the fit and function of the original equipment suspension spring for certain vehicle applications
See More

Dorman – Suspension Leaf Spring (Part No.22-597HD)

Suspension Leaf Spring

from

$586.99
Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.

Product Features:
  • Suspension Leaf Spring
  • Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.
  • Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life
See More

Dorman – Suspension Leaf Spring (Part No.22-719)

Suspension Leaf Spring

from

$436.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
  • Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life
See More

Upgrade your 1996 GMC G3500 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1996 GMC G3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Suspension Parts are key to keeping your G3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Suspension Parts for the 1996 GMC G3500, designed to meet your needs without breaking the bank. From Air Suspension and Kit replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1996 GMC G3500 at great prices. Our Suspension Parts inventory for this model ranges from just $3.79 to $461.99, with an average price of $62.92. Our 41 Suspension Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1996 GMC G3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 GMC G3500, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Dorman, Moog, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Dorman and Moog also bring quality to the table, with Suspension Parts available starting at $3.79, and at an average 4 stars rating. With 9,551 customer reviews and counting, our 1996 GMC G3500 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 GMC G3500 is always ready to roll. We’re committed to providing you with everything you need to keep your G3500 in top shape, all in one place. Start shopping confidently below for your 1996 GMC G3500!

Best-Selling Air Suspension and Kits for 1996 GMC G3500s

Enhance the driving experience in your GMC with 7 quality Air Suspension and Kit components, starting at $3.79.

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Body Bolt M6-1.0 x 25mm

from

$3.79
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards.
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Multi Purpose Relay

from

$28.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Multi Purpose Relay (Part No.83A1008)

Multi Purpose Relay

from

$17.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

Multi-Purpose Relay

from

$51.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 3600Lb, Aeon Hollow Rubber (Part No.GMRG35)

Rubber Spring, Inside Coil Spring Mount, 3600Lb, Aeon Hollow Rubber

from

$454.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1256)

Multi Purpose Relay

from

$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Popular 1996 GMC G3500 Shocks and Struts

Customize your GMC with 12 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Bellows, all priced under $103.99.

MOOG – Leaf Spring Shackle Bushing (Part No.K200897)

Leaf Spring Shackle Bushing

from

$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59549)

Gas-Matic LT Shock Absorber

from

$38.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34839)

Gas-Magnum Shock Absorber

from

$63.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Magnum RV Shock Absorber (Part No.555036)

Magnum RV Shock Absorber

from

$75.99
The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-3/8-inch (60.3 mm) reserve tube The 2″ (555xx Series) or 2-3/8′ (557xx Series) reserve tube holds more fluid or more consistent performance – when required
  • 1-3/8-inch (35 mm) or 1-3/4-inch (44.6 mm) bore The 1-3/8′ (555xx Series) or 1-3/4″ (557xx Series) bore is larger than most shocks to provide more efficient and consistent control – when required
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Gas-Matic Truck Shock Absorber (Part No.59043)

Gas-Matic Truck Shock Absorber

from

$42.49
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic light trucks and vans
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5478)

High Pressure Monotube Gas Shock

from

$103.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Gm Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Monroe – Magnum RV Shock Absorber (Part No.555035)

Magnum RV Shock Absorber

from

$91.99
The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-3/8-inch (60.3 mm) reserve tube The 2″ (555xx Series) or 2-3/8′ (557xx Series) reserve tube holds more fluid or more consistent performance – when required
  • 1-3/8-inch (35 mm) or 1-3/4-inch (44.6 mm) bore The 1-3/8′ (555xx Series) or 1-3/4″ (557xx Series) bore is larger than most shocks to provide more efficient and consistent control – when required
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5420)

High Pressure Monotube Gas Shock

from

$81.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Gm Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG6407)

High Pressure Monotube Gas Shock

from

$77.99
The KYB Gas-a-just monotube truck shock absorber has additional performance advantages over the twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The Gas-a-Just is available as an OE monotube replacement and as an OE twin-tube performance upgrade. The KYB Gas-a-Just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Heavy Duty Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Dorman – SHACKLE BUSHING (Part No.541-608)

SHACKLE BUSHING

from

$20.99
SHACKLE BUSHING

Top Picks for 1996 GMC G3500 Coil and Leaf Springs

Upgrade GMC G3500s with top-quality Coil and Leaf Springs parts, including 7 OEM and aftermarket selections for your 1996 model.

Dorman – Rear Position Leaf Spring Shackle Kit (Part No.722-006)

Rear Position Leaf Spring Shackle Kit

from

$35.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle.
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life.
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

MOOG – Coil Spring Insulator (Part No.K160045)

Coil Spring Insulator

from

$18.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

MOOG – Leaf Spring Shackle (Part No.K150404)

Leaf Spring Shackle

from

$63.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Leaf Spring Bushing (Part No.SB351)

Leaf Spring Bushing

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Spring Bushing (Part No.RP35400)

Spring Bushing

from

$20.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

Dorman – Suspension Leaf Spring (Part No.22-901)

Suspension Leaf Spring

from

$461.99
Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.

Product Features:
  • Suspension Leaf Spring
  • Fatigued or rusted leaf spring causing a sagging suspension system? This replacement leaf spring will restore proper spring tension and suspension performance.
  • Ideal replacement – this leaf spring matches the fit and function of the original equipment suspension spring for certain vehicle applications
See More

Rare Parts – Coil Spring Insul (Part No.RP46346)

Coil Spring Insul

from

$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

In-Demand Control Arms for 1996 GMC G3500s

Select from 15 premium Control Arms parts for your 1996 GMC G3500, with prices ranging from $6.79 to $75.99.

Driveworks – Control Arm Bushing (Part No.DW-K6395B)

Control Arm Bushing

from

$14.99
Control Arm Bushing

MOOG – Control Arm Bushing Kit (Part No.K6395)

Control Arm Bushing Kit

from

$40.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

MOOG – Control Arm Bushing Kit (Part No.K6327)

Control Arm Bushing Kit

from

$33.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

MOOG – Control Arm Shaft Kit (Part No.K6147)

Control Arm Shaft Kit

from

$73.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

Driveworks – Suspension Control Arm Bushing (Part No.DW-K6395)

Suspension Control Arm Bushing

from

$6.79
Driveworks control arm bushings are high-quality, cost-effective parts. They help prevent wear to more expensive or less easily replaced parts, and they absorb vibration that would be transmitted to the interior of the car. Driveworks chassis parts ensure improved steering response and durability to your vehicle.
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP15350)

Control Arm Shaft Kit

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

TRW – Control Arm Shaft Kit (Part No.L2032455203TRW)

Control Arm Shaft Kit

from

$66.47
Every Febi Control Arm Shaft Kit is manufactured using only the highest quality materials and is designed to maintain suspension geometry.

Product Features:
  • OE expertise and quality
  • Precision manufactured
  • Corrosion protection
See More

Rare Parts – Control Arm Bushing (Part No.RP17010)

Control Arm Bushing

from

$58.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

MOOG – Suspension Control Arm Shaft Kit (Part No.K6135)

Suspension Control Arm Shaft Kit

from

$57.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

Dorman – Suspension Control Arm (Part No.527-397)

Suspension Control Arm

from

$56.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.527-398)

Suspension Control Arm

from

$56.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – U-Bolt Mounting Kit (Part No.RP19899)

U-Bolt Mounting Kit

from

$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Holds Round Lower Control Arm Shaft to the frame on Chevy & GMC Trucks
See More

TRW – Control Arm Bushing (Part No.L2030206864TRW)

Control Arm Bushing

from

$37.05
Control Arm Bushing

Dorman – Control Arm Shaft Kit (Part No.520-190)

Control Arm Shaft Kit

from

$32.49
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm Bushing (Part No.RP22205)

Control Arm Bushing

from

$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Top-Rated Suspension Parts Brands For Your 1996 GMC G3500

Shop for the best-rated brands offering Suspension Parts and other products for your 1996 GMC G3500s. Below you’ll find some of our best rated Suspension Parts from Valvoline, Dorman, and Moog, and more. Suspension Parts from these brands that fit a 1996 G3500 start at just $3.79 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1996 GMC G3500 Suspension Parts

When it comes to maintaining or upgrading your 1996 GMC G3500, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1996 GMC G3500. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Dorman 1996 GMC G3500 Suspension Parts

Dorman auto parts is one of the highest quality Suspension Part brands in the market. Any 1996 GMC G3500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1996 G3500, Advance Auto Parts carries a full inventory of 7 Dorman Suspension Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Suspension Parts range from $3.79 to $461.99, plus, with more than 9 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

Suspension Control Arm
from
$56.99
This product is not rated

Suspension Control Arm

“”

Suspension Control Arm
from
$56.99
This product is not rated

Suspension Control Arm

“”

Suspension Leaf Spring
from
$461.99
This product is not rated

Suspension Leaf Spring

“”

FAQs for 1996 GMC G3500 Suspension Parts

Which Suspension Parts are best-sellers for 1996 GMC G3500s?

Out of 41 Suspension Parts that fit 1996 GMC G3500s, the following parts are the top sellers:

What’s the price range for 1996 GMC G3500 Suspension Parts?

Suspension Part prices for the 1996 GMC G3500 start at $3.79 and go up to $461.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1996 GMC G3500?

The average price for Suspension Parts for the 1996 GMC G3500 is $62.92. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other GMC G3500 model years?

Yes, we currently carry Suspension Parts for 17 model years of GMC G3500s between 1979 and 1995. Suspension Parts are bought most frequently for the following model years: 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988, and 1987.

What are the cheapest Suspension Parts for my 1996 GMC G3500?

The cheapest 1996 GMC G3500 Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 1996 GMC G3500?

Out of 9,551 reviews by customers, our 1996 GMC G3500 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1996 GMC G3500 and their top-rated products:

Can I get help with 1996 GMC G3500 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Suspension Parts and more.

What is your return policy for GMC G3500 Suspension Parts?

Advance Auto Parts keeps returns simple. For new GMC G3500 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.