1996 GMC C1500 Differentials

Essential 1996 GMC C1500 Differentials

USA Standard Gear – Rear Axle For ’80-’87 GM 2WD Truck (Part No.35172)

Rear Axle For '80-'87 GM 2WD Truck

from

$246.99
USA Standard Gear rear axle for ’80-’87 GM 2WD truck. 31 5/16″ long, 28 spline.

Product Features:
  • 28 spline
  • 5 lug
  • 31 5/16″ long
  • Fits GM 8.5″ in 1980-1987 GM 2WD truck
See More

Pro-King – Pinion Nut (Part No.740A961)

Pinion Nut

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Minor Install Kit For GM 12 Bolt Truck Differential (Part No.12044)

Minor Install Kit For GM 12 Bolt Truck Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:
  • Fits GM 12 bolt truck
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Pro-King – Differential Cross Shaft (Part No.742G673)

    Differential Cross Shaft

    from

    $28.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Install Kit For GM 12 Bolt Truck Differential (Part No.13057)

    Pinion Install Kit For GM 12 Bolt Truck Differential

    from

    $232.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 12 bolt truck
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    USA Standard Gear – Mini Spool For GM 8.5", 28 Spline (Part No.59011)

    Mini Spool For GM 8.5", 28 Spline

    from

    $139.99
    Product Features:
    • Fits GM 8.5″ with 28 spline axles
    • Installs into a standard open carrier case
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    • Mini spool
    See More

    Yukon Gear – Dura Grip Positraction For GM 8.5" With 28 Spline Axles (Part No.26015)

    Dura Grip Positraction For GM 8.5" With 28 Spline Axles

    from

    $859.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

    Product Features:
    • Fits GM 8.5″ with 28 spline axles
    • 2.73 ratio and up only
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33166)

    Pinion Nut Washer

    from

    $23.99
    Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

    Product Features:
    • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
    See More

    Yukon Gear – Master Overhaul Kit For ’79-’97 GM 9.5" Semi-Float Differential (Part No.14096)

    Master Overhaul Kit For '79-'97 GM 9.5" Semi-Float Differential

    from

    $464.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Econ shims.

    Product Features:
    • Fits 1997 and down GM 9.5″
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

    Differential Mini Spool

    from

    $124.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

    Differential Gear Install Kit

    from

    $65.99


    Product Features:
    • MINI INSTALL KIT GM 8.5 REAR
    See More

    USA Standard Gear – Ring & Pinion Gear Set For GM 12 Bolt Truck In A 3.42 Ratio (Part No.36174)

    Ring & Pinion Gear Set For GM 12 Bolt Truck In A 3.42 Ratio

    from

    $334.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits GM 12 bolt truck
    • 8.875″ ring gear diameter
    • 30 spline pinion
    • 12 ring gear bolts
    • 3.42 ratio
    See More

    Yukon Gear – Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T (Part No.33406)

    Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T

    from

    $23.99
    Standard Open and positraction cross pin shaft for GM 12T, 12P, and 55T.

    Product Features:
    • Cross pin shaft for GM 12 bolt passenger car and truck
    • Fits standard open and positraction applications
    See More

    Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

    12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

    from

    $109.99
    12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
    See More

    MTC – Differential Drain P (Part No.J7065587755MTC)

    Differential Drain P

    from

    $12.52
    Differential Drain P

    Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

    14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

    from

    $404.99
    Product Features:
    • Clutch kit
    • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
    • 14 piece kit
    • Carbon fiber clutches
    See More

    Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

    Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

    from

    $28.99
    Positraction cross pin bolt for GM 12P and 12T.

    Product Features:
    • Cross pin bolt for GM 12 bolt passenger car and truck
    • For OEM positraction applications only
    See More

    Yukon Gear – 9.5 Standard Open Pinion Gear Thrust Washer (Part No.33374)

    9.5 Standard Open Pinion Gear Thrust Washer

    from

    $28.99
    9.5 Standard Open Pinion gear Thrust Washer.

    Product Features:
    • Pinion gear thrust washer
    • Fits GM 9.5″
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Pro-King – Differential Pinion Seal (Part No.743B070A)

    Differential Pinion Seal

    from

    $23.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Powertrax – Grip LS Traction System (Part No.LS231230)

    Grip LS Traction System

    from

    $480.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Pro-King – Differential Axle Bearing (Part No.742G280A)

    Differential Axle Bearing

    from

    $28.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

    Cast Yoke For GM 8.5" With A 1350 U/Joint Size

    from

    $234.99
    Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Strap style
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

    DIFFERENTIAL GASKET

    from

    $7.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

    Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

    from

    $57.99
    Product Features:
    • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
    See More

    ACDelco – Differential Bearing (Part No.J7060723477ACD)

    Differential Bearing

    from

    $88.94
    Differential Bearing

    Yukon Gear – Differential Carrier (Part No.57015)

    Differential Carrier

    from

    $251.99
    Differential Carrier

    1996 GMC C1500 Differentials

    Maybe you’re in the middle of a full rebuild of that 1996 GMC C1500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 270 different Differentials in our inventory ranging from $1.99 to $1,944.99. That means you can find the exact parts or products you need to keep that 1996 GMC C1500 running smoothly.

    Differentials are only as good as their brand. We stock 21 different brands to make sure you have plenty of trusted parts to choose from for your 1996 GMC C1500. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1996 GMC C1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,664 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.1 stars and Rear Differential Cover with 4.8 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1996 GMC C1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1996 GMC C1500 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 GMC C1500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C1500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Spectre Differentials

    We carry Spectre parts in our stock across Differential Covers categories, plus more. For a 1996 GMC C1500, our most popular Spectre Differentials include:
    Differential Cover
    from $59.99
    (1)
    Differential Cover
    Differential Covers

    Top 1996 GMC C1500 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1996 GMC C1500. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Differential Cover Gasket
    from $7.99
    (20)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    FAQs for 1996 GMC C1500 Differentials

    What are the most purchased Differentials for the 1996 GMC C1500?

    Out of 270 Differentials for the 1996 GMC C1500, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings

    What are the top-rated 1996 GMC C1500 Differentials?

    Top-rated Differentials for your 1996 GMC C1500 based on customer reviews/ratings are:
    Rear Differential Cover
    from $32.99
    (14)
    Rear Differential Cover
    “Heavy steel with the original magnet. Fits like original.. Not a cheap stamping by any means”
    Rear Differential Cover
    from $55.99
    (11)
    Rear Differential Cover
    “Good quality cover, nice coat of paint on it. Should outlast the truck.”
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    “great”