1996 Geo Prizm Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1996 Geo Prizms

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1166)

Fuel Injection Pressure Regulator

from

$139.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest – Fuel Injector Connector (Part No.PT2318)

Fuel Injector Connector

from

$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Dorman – Help – Fuel Line Connector (Part No.55180)

Fuel Line Connector

from

$18.99
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:
  • Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
  • Quality construction – manufactured from premium materials for a long service life
  • Saves money – replace only the part, not the entire assembly
  • Excellent value – original equipment quality at a lower price
See More

KAI – Fuel Filler Neck (Part No.FFN010143)

Fuel Filler Neck

from

$60.99
New Platinum Pro Fuel Filler Neck, 93-97 Corolla

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Aisan – Fuel Cut Off Valve (Part No.E2015177515AIS)

Fuel Cut Off Valve

from

$9.38
Fuel Cut Off Valve

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33654)

Fuel Injection Nozzle O-Ring Kit

from

$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Idle Air Control Valve (Part No.ACC1006)

Idle Air Control Valve

from

$99.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1077)

Manifold Absolute Pressure Sensor (MAP)

from

$85.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

FAE – Water Temperature Sender, 12mm (Part No.P403660918FAE)

Water Temperature Sender, 12mm

from

$27.17
Water Temperature Sender, 12mm

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1504)

Remanufactured Fuel Injector

from

$45.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$81.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1159)

Exhaust Gas Recirculation (EGR) Valve

from

$145.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Fuel Tank Strap Coated For Rust Prevention (Part No.578-142)

Fuel Tank Strap Coated For Rust Prevention

from

$44.49
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Mark Automotive – Fuel Tank Cap Seal (Part No.E206089586MAM)

Fuel Tank Cap Seal

from

$19.45
Fuel Tank Cap Seal

Motorad – Tethered Fuel Cap (Part No.MGC825T)

Tethered Fuel Cap

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1177)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$4.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
  • Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.EGA1345)

Exhaust Gas Recirculation (EGR) Valve Control Solenoid

from

$104.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – FUEL INJECTOR O-RING SET (Part No.ES 70600)

FUEL INJECTOR O-RING SET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Ishino – Fuel Inject Cushion Ring (Part No.C1011144317ISH)

Fuel Inject Cushion Ring

from

$2.17
Fuel Inject Cushion Ring

KAI – Fuel Tank (Part No.FTK010021)

Fuel Tank

from

$219.99
New Platinum Pro Fuel Tank, 13 Gallon, 93-97 Corolla

Product Features:
  • 13 Gallon Tank
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Delphi – Fuel Pump Strainer (Part No.FS0072)

Fuel Pump Strainer

from

$30.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Delphi – Fuel Pump Strainer (Part No.FS0093)

Fuel Pump Strainer

from

$19.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest – Fuel Pump Lock Ring (Part No.579-071)

Fuel Pump Lock Ring

from

$7.49
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Fuel Tank Lock Ring (Part No.579-034)

Fuel Tank Lock Ring

from

$8.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.

Product Features:
  • Lock ring should be replaced when changing the fuel tank or fuel module
  • Application specific design ensure a perfect fit guarantee
  • OEM fit, form and function
  • OEM design ensures corrosion resistance and prevents leakage from the fuel tank
See More

Carquest Premium – Fuel Pump Includes Wiring Harness (Part No.E260125)

Fuel Pump Includes Wiring Harness

from

$221.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

DENSO – Original Equipment Quality Electric Fuel Pump (Part No.951-0007)

Original Equipment Quality Electric Fuel Pump

from

$123.99
As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Upgrade your 1996 Geo Prizm with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1996 Geo Prizm, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Geo or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Prizm functioning at its best. At Advance Auto Parts, we offer a wide selection of 64 Fuel and Emissions Systems for the 1996 Geo Prizm, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1996 Geo Prizm at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.17 to $879.99, with an average price of $88.10. Our 64 Fuel and Emissions Systems in stock come from 21 trusted brands, so you’re sure to find the right part for your 1996 Geo Prizm without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Geo Prizm, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Carquest Premium, Delphi, and more. Bosch Fuel and Emissions Systems start at just $59.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $4.29, and at an average 4 stars rating. With 1,756 customer reviews and counting, our 1996 Geo Prizm Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Geo Prizm is always ready to roll. We’re committed to providing you with everything you need to keep your Prizm in top shape, all in one place. Start shopping confidently below for your 1996 Geo Prizm!

Best-Selling Oxygen Sensors for 1996 Geo Prizms

Enhance the driving experience in your Geo with 10 quality Oxygen Sensor components, starting at $45.99.

DENSO – Oxygen Sensor: 2 Wire, 11.77" Long, Not Heated, Universal Fit (Part No.234-2000)

Oxygen Sensor: 2 Wire, 11.77" Long, Not Heated, Universal Fit

from

$45.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: Downstream, 4 Wire, 14.17" Long, Heated, Exact Fit (Part No.234-4061)

Oxygen Sensor: Downstream, 4 Wire, 14.17" Long, Heated, Exact Fit

from

$111.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal

from

$80.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

DENSO – Oxygen Sensor: 2 Wire, 18.82" Long, Not Heated, Exact Fit (Part No.234-2003)

Oxygen Sensor: 2 Wire, 18.82" Long, Not Heated, Exact Fit

from

$65.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$81.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Bosch – Oxygen Sensor: 2 Wire, 37.4" Long, Non-heated, Universal (Part No.12211)

Oxygen Sensor: 2 Wire, 37.4" Long, Non-heated, Universal

from

$59.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010100913ND)

First Time Fit Oxygen Sensor

from

$114.84
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Bosch – Oxygen Sensor: 4 Wire, 27.36" Long, Heated, Exact Fit (Part No.13489)

Oxygen Sensor: 4 Wire, 27.36" Long, Heated, Exact Fit

from

$92.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010100853ND)

First Time Fit Oxygen Sensor

from

$91.23
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

DENSO – Universal Oxygen Sensor (Part No.C5010100824ND)

Universal Oxygen Sensor

from

$81.95
Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Most Popular 1996 Geo Prizm Gas Caps

Customize your Geo with 7 Gas Caps products like Gas Caps, all priced under $40.46.

Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)

Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10595)

Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Stant – Locking Fuel Cap (Part No.E201032816STN)

Locking Fuel Cap

from

$26.19
Stant locking gas caps are OEM quality both in construction and materials as well as deterrent to fuel theft and vandalism. A gas/fuel cap performs three very important functions; safety of the vehicle’s occupants, fuel economy and reduce emissions. Safety: Without a fuel cap, gasoline vapors will be present around your car at all times. Those vapors can be ignited by a random spark or flame and are very dangerous if you are involved in an accident or rollover. Fuel Economy: According to Sun Oil Company research, a vehicle with a missing or inoperative fuel cap will allow 176 pounds (22 gallons) of gasoline to evaporate over the period of one year. Emissions: Gasoline vapors emit hydrocarbons which dissolve the earth’s ozone layer and cause smog.

Product Features:
  • A quality locking mechanism deters fuel theft and vandalism
  • Original equipment performance and safety standards
  • OEM quality construction and materials
  • Replacing an old, leaky or missing gas cap can save as much as a gallon of gas every 15 days
  • A new gas cap can pay for itself in less than three months.
See More

Motorad – Tethered Fuel Cap (Part No.MGC825T)

Tethered Fuel Cap

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17595)

Keyed Alike Locking Fuel Cap

from

$11.49
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000584211ACD)

Professional Molded Coolant Hose

from

$40.46
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Gates – Fuel Tank Cap (Part No.E2010606037GAT)

Fuel Tank Cap

from

$24.06
Fuel Tank Cap

Top Picks for 1996 Geo Prizm Fuel Injectors

Upgrade Geo Prizms with top-quality Fuel Injectors parts, including 11 OEM and aftermarket selections for your 1996 model.

Felpro – FUEL INJECTOR O-RING SET (Part No.ES 70600)

FUEL INJECTOR O-RING SET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33654)

Fuel Injection Nozzle O-Ring Kit

from

$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1504)

Remanufactured Fuel Injector

from

$45.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1167)

Fuel Injection Pressure Regulator

from

$118.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10466)

Fuel Injection Pressure Regulator

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Fuel Injection Corp – Fuel Injector, Remanufactured (Part No.C1000144009FIC)

Fuel Injector, Remanufactured

from

$106.43
The FIC fuel injectors are completely remanufactured and are fully tested to exceed OEM specifications. Remanufacturing Process

Product Features:
  • All fuel hose, external seals, filter, pintle cap, etc. are removed.
  • Fuel injector is then fully disassembled.
  • All components are checked to meet OEM specifications and cleaned.
  • Coil is replaced with New FIC Coil.
  • All internal seals are replaced.
  • Injector is re-assembled and calibrated The injector is fully tested for:
  • Coil resistance
  • Spray pattern
  • Fuel delivery – static and dynamic
  • Leak test
  • Once the injector meets all OEM specifications, the filter, pintle cap, all external seals, hose and hose ferrules are replaced.
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1514)

Remanufactured Fuel Injector

from

$48.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11974-01)

Fuel Injector O-Ring Kit

from

$7.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Fuel Injector O-Ring (Part No.C1013975869FEL)

Fuel Injector O-Ring

from

$6.95
Fuel Injector O-Ring

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Fuel Injector Connector

from

$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Ishino – Fuel Inject Cushion Ring (Part No.C1011144317ISH)

Fuel Inject Cushion Ring

from

$2.17
Fuel Inject Cushion Ring

In-Demand Fuel Pumps for 1996 Geo Prizms

Select from 14 premium Fuel Pumps parts for your 1996 Geo Prizm, with prices ranging from $15.99 to $879.99.

DENSO – Original Equipment Quality Electric Fuel Pump (Part No.951-0007)

Original Equipment Quality Electric Fuel Pump

from

$123.99
As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Delphi – Fuel Pump Strainer (Part No.FS0093)

Fuel Pump Strainer

from

$19.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Carquest Premium – Fuel Pump (Part No.E295017)

Fuel Pump

from

$55.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump (Part No.E260149)

Fuel Pump

from

$91.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Electric Fuel Pump: With Hose Clamps, Hose Piece, Isolator, Pall Nut, Seal (Part No.FE0119)

Electric Fuel Pump: With Hose Clamps, Hose Piece, Isolator, Pall Nut, Seal

from

$155.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

DENSO – Electric Fuel Pump: OE-Equivalent, Direct Fit, and Minimized Noise (Part No.E3000130627ND)

Electric Fuel Pump: OE-Equivalent, Direct Fit, and Minimized Noise

from

$190.43
The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:
  • OE-Equivalent and direct fit for easy installation.
  • OE connections and fittings.
  • The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
  • Ultra-high balanced armature to minimize noise and vibration.
  • High pressure check valve provides superior hot fuel handling characteristics.
  • The brushes are designed for durability, efficiency, and low-resistance operation.
  • High quality relief valve to protect the fuel delivery system.
See More

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000334268ND)

First Time Fit Electric Fuel Pump

from

$162.99
The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:
  • OE-Equivalent and direct fit for easy installation.
  • OE connections and fittings.
  • The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
  • Ultra-high balanced armature to minimize noise and vibration.
  • High pressure check valve provides superior hot fuel handling characteristics.
  • The brushes are designed for durability, efficiency, and low-resistance operation.
  • High quality relief valve to protect the fuel delivery system.
See More

DENSO – Original Equipment Quality Fuel Pump & Strainer Kit (Part No.950-0123)

Original Equipment Quality Fuel Pump & Strainer Kit

from

$168.99
As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000130658ND)

First Time Fit Electric Fuel Pump

from

$272.47
The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:
  • OE-Equivalent and direct fit for easy installation.
  • OE connections and fittings.
  • The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
  • Ultra-high balanced armature to minimize noise and vibration.
  • High pressure check valve provides superior hot fuel handling characteristics.
  • The brushes are designed for durability, efficiency, and low-resistance operation.
  • High quality relief valve to protect the fuel delivery system.
See More

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2496343)

Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer

from

$879.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Spectra Premium – Fuel Pump (Part No.SP1123)

Fuel Pump

from

$129.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to increase performance and efficiency, leading to longer life
  • High grade outer shell for life-long corrosion resistance
  • Optimized, precision-wound armature assembly for increased performance
See More

Carquest Premium – Fuel Pump E2287255: Includes Wiring Harness (Part No.E2287255)

Fuel Pump E2287255: Includes Wiring Harness

from

$119.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Most Sold 1996 Geo Prizm Air Flow Sensors

Explore our best-selling Geo parts for the 1996 Prizm among 3 OEM and aftermarket options starting from $29.99.

NTK – Air Charge Temperature Sensor (Part No.EF0105)

Air Charge Temperature Sensor

from

$29.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
  • NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
  • Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1077)

Manifold Absolute Pressure Sensor (MAP)

from

$85.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Delphi – Air Charge Temperature Sensor (Part No.TS10029)

Air Charge Temperature Sensor

from

$68.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors are built with the latest OE technology
  • Delphi temperature sensors are impervious to electrical noise and interference
  • Part is validated, tested and matched to the right vehicle application
  • Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1996 Geo Prizm

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1996 Geo Prizms. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Carquest Premium, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 1996 Prizm start at just $4.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 1996 Geo Prizm Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1996 Geo Prizm, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 1996 Geo Prizm. With over 3 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $59.99, with an average price of just $77.99. Plus, with over 145 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Oxygen Sensor: 4 Wire, 27.36" Long, Heated, Exact Fit
from
$92.99
This product is not rated

Oxygen Sensor: 4 Wire, 27.36" Long, Heated, Exact Fit

“”

Oxygen Sensor: 2 Wire, 37.4" Long, Non-heated, Universal
from
$59.99

(1)

Oxygen Sensor: 2 Wire, 37.4" Long, Non-heated, Universal

“The sensor in the picture has a factory type connector on the end,the one I recieved required splicing into the factory wiring.The description said “E”

Popular Carquest Premium 1996 Geo Prizm Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1996 Geo Prizm owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1996 Prizm, Advance Auto Parts carries a full inventory of 16 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Geo in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $4.29 to $879.99, plus, with more than 53 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Keyed Alike Locking Fuel Cap
from
$11.49
This product is not rated

Keyed Alike Locking Fuel Cap

“”

Remanufactured Fuel Injector
from
$45.99
This product is not rated

Remanufactured Fuel Injector

“”

Exhaust Gas Recirculation (EGR) Valve
from
$145.99
This product is not rated

Exhaust Gas Recirculation (EGR) Valve

“”

FAQs for 1996 Geo Prizm Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1996 Geo Prizms?

Out of 64 Fuel and Emissions Systems that fit 1996 Geo Prizms, the following parts are the top sellers:

What’s the price range for 1996 Geo Prizm Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1996 Geo Prizm start at $2.17 and go up to $879.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1996 Geo Prizm?

The average price for Fuel and Emissions Systems for the 1996 Geo Prizm is $88.10. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Geo Prizm model years?

Yes, we currently carry Fuel and Emissions Systems for 8 model years of Geo Prizms between 1989 and 1997. Fuel and Emissions Systems are bought most frequently for the following model years: 1997, 1995, 1994, 1993, 1992, 1991, 1990, and 1989.

What are the cheapest Fuel and Emissions Systems for my 1996 Geo Prizm?

The cheapest 1996 Geo Prizm Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 1996 Geo Prizm?

Out of 1,756 reviews by customers, our 1996 Geo Prizm Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1996 Geo Prizm and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 1996 Geo Prizm?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1996 Geo Prizm:

Can I get help with 1996 Geo Prizm Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Geo Fuel and Emissions Systems and more.

What is your return policy for Geo Prizm Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Geo Prizm Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.