1996 Eagle Summit Engine Parts
Find Your Specific 1996 Eagle Summit Engine Parts
Below you will find various in-demand Eagle Engine Parts, components and accessories for your 1996 Summit. Advance Auto Parts has popular Summit parts like Engine Timing Parts, Valve Cover and Cylinder Heads, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Summit model years including
1989,
1990,
1991,
1992,
1993,
1994,
1995 and more. Select a category of 1996 Eagle Summit Engine Parts below and start saving instantly.
Popular 1996 Eagle Summit Engine Parts Categories
Essential Engine Parts for 1996 Eagle Summits
Melling – Engine Oil Priming Tool (Part No.MPL-201)
from
$355.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More
Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (Sold by each) (Part No.570-009)
from
$14.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 35.21mm, Height 0.380 (Sold by each) (Part No.555-093)
from
$1.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40672)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Anchor – Engine Mount: Front, 1 Piece (Part No.8821)
from
$76.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-94; EAGLE 92-94; MITS 92-92; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1994
- Weight approx: 2 Lbs
Melling – Stock Replacement OE Type Oil Pump (Part No.M170)
from
$118.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Dayco – Premium Timing Belt, 38.12 Inch With 121 Round Tooth (Part No.95201)
from
$38.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round tooth profile; designed to fit the timing sprockets precisely
Felpro – Engine Crankcase Vent Valve Seal (Part No.TCS 45483)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 70359)
from
$30.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Melling – Stock Replacement Oil Pump Screen (Part No.260S)
from
$69.99
A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.
Product Features:
See More
Product Features:
- Manufactured from high quality durable materials for long wear
- Precision engineering protects the engine from dirt and contaminants
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Dorman – Harmonic Balancer Assembly (Part No.594-106)
from
$101.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
Product Features:
See More
Product Features:
- Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction – stringent specifications and careful construction help ensure longevity
- Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Conversion Gasket Set (Part No.CS 9887)
from
$67.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA2759)
from
$67.99
Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
- O-rings and seals are included if required.
- Weather-tight connectors prevent leaks and corrosion for better reliability.
- Extensive design validation testing and 100% end-of-line tested.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
National – Multi Purpose Seal (Part No.710767)
from
$27.49
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: – 0 Deg. F to 400 Deg. F / – 0 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Dayco – Hydraulic Timing Belt Actuator (Part No.85012)
from
$71.99
Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
Product Features:
See More
Product Features:
- Designed to dampen noise and enhance belt life
- Keeps belt tension at a constant level for better performance
- Meets OE fit, form and function criteria
- Prevents belt flapping
Driveworks – Oil Seal (Part No.S-3771)
from
$9.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dayco – Timing Belt Kit; With Belt, Camshaft Belt Tensioner, 2 Piece Set (Part No.95128K1)
from
$34.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.
Product Features:
See More
Product Features:
- Engineered for both domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and tough, wear-resistant belt
Sealed Power – Engine Balance Shaft Bearing Set (Part No.1810M)
from
$75.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$191.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Spartan – Engine Cylinder Head; Mitsu 4G64 Cyl Head (Part No.2224)
from
$723.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Felpro – Shaft Repair Sleeve (Part No.16275)
from
$11.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Engine$aver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Cloyes Gear – Engine Balance Shaft Belt Tensioner (Part No.9-5197)
from
$14.99
Our tensioners are designed to provide the same fit and function, providing durable long-lasting performance. Extensively tested and measured for function, fitment, and durability to ensure optimal performance. Recommended that the belt tensioner(s) and belt idler(s) also be replaced when the belt is replaced as these components play a vital role in supporting the belt and keeping it tight. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- Designed to absorb changes in the loss of timing belt tension, Timing Belt Tensioners provide constant tension on the timing belt during crankshaft revolution
- Extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Recommended that the belt tensioner(s) and belt idler(s) also be replaced when the belt is replaced as these components play a vital role in supporting the belt and keeping it tight
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
Dorman – Crankshaft Position Sensor Reluctor Wheel (Part No.917-024)
from
$21.99
This crankshaft angle sensor blade is designed to match the fit and function of the original blade on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this crankshaft angle sensor blade is designed to match the fit and function of the original blade on specified vehicles
- Restores functionality – reliable replacement for a missing part that has failed due to corrosion
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10088)
from
$13.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
National – Multi Purpose Seal (Part No.223018)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for prelubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
Sealed Power – Engine Valve Lifter (Part No.HT-6000)
from
$17.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Upgrade your 1996 Eagle Summit with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1996 Eagle Summit, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Eagle or enhancing its overall performance, Engine Parts are key to keeping your Summit functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Engine Parts for the 1996 Eagle Summit, designed to meet your needs without breaking the bank.
From
Engine Timing Part
replacements to
Valve Cover and Cylinder Heads
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1996 Eagle Summit at great prices.
Our Engine Parts inventory for this model
ranges from just $1.79 to $723.99, with
an average price of $66.99.
Our 58 Engine Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1996 Eagle Summit without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Eagle Summit, we stock popular OEM and aftermarket Engine Parts from top names
like Dayco, Dorman, Imperial, and more.
Dayco Engine Parts
start at just $33.99 and boast an impressive 4.5 stars average rating from customers.
Dorman and Imperial also bring quality to the table, with Engine Parts available starting at $18.99, and at an average 4.2 stars rating.
With 183 customer reviews and counting, our 1996 Eagle Summit Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1996 Eagle Summit is always ready to roll. We’re committed to providing you with everything you need to keep your Summit in top shape, all in one place.
Start shopping confidently below for your 1996 Eagle Summit!
Best-Selling Engine Timing Parts for 1996 Eagle Summits
Enhance the driving experience in your Eagle with 12 quality Engine Timing Part components, starting at $3.29.
Driveworks – Oil Seal (Part No.S-223750)
from
$3.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dayco – Timing Component Kit Without Belt, Dayco (Part No.84075)
from
$83.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.
Product Features:
See More
Product Features:
- Engineered for the majority of domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and a tough, wear-resistant belt
- Meets or exceeds OE quality
Dayco – Premium Timing Belt, 34.49 Inch With 92 Round Tooth (Part No.95191)
from
$33.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round tooth profile; designed to fit the timing sprockets precisely
Felpro – Engine Crankcase Vent Valve Seal (Part No.TCS 45483)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Engine Crankshaft Seal (Part No.223750)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Dayco – Premium Timing Belt, 38.12 Inch With 121 Round Tooth (Part No.95201)
from
$38.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round tooth profile; designed to fit the timing sprockets precisely
Dayco – Hydraulic Timing Belt Actuator (Part No.85036)
from
$104.99
Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.
Product Features:
See More
Product Features:
- Designed to dampen noise and enhance belt life
- Keeps belt tension at a constant level for better performance
- Meets OE fit, form and function criteria
- Prevents belt flapping
Sealed Power – Engine Balance Shaft Bearing Set (Part No.1810M)
from
$75.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
NTN Bearing Corporation – NTN Balance Shaft Belt Tensioner (Part No.A502791407NTN)
from
$53.90
The NTN Balance Shaft Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- High quality sealed precision bearing assembly
- OE specified pulley
- Durable long life performance
Dayco – Premium Timing Belt, 46.5 Inch With 124 Round Tooth (Part No.95230)
from
$50.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round tooth profile; designed to fit the timing sprockets precisely
Cloyes Gear – Engine Balance Shaft Belt Tensioner (Part No.9-5197)
from
$14.99
Our tensioners are designed to provide the same fit and function, providing durable long-lasting performance. Extensively tested and measured for function, fitment, and durability to ensure optimal performance. Recommended that the belt tensioner(s) and belt idler(s) also be replaced when the belt is replaced as these components play a vital role in supporting the belt and keeping it tight. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.
Product Features:
See More
Product Features:
- Designed to absorb changes in the loss of timing belt tension, Timing Belt Tensioners provide constant tension on the timing belt during crankshaft revolution
- Extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Recommended that the belt tensioner(s) and belt idler(s) also be replaced when the belt is replaced as these components play a vital role in supporting the belt and keeping it tight
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
National – Multi Purpose Seal (Part No.223018)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Most Popular 1996 Eagle Summit Valve Cover and Cylinder Heads
Customize your Eagle with 2 Valve Cover and Cylinder Heads products
like Engine Valve Lifters and
Cylinder Heads, all
priced under $723.99.
Sealed Power – Engine Valve Lifter (Part No.HT-6000)
from
$17.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Spartan – Engine Cylinder Head; Mitsu 4G64 Cyl Head (Part No.2224)
from
$723.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Top Picks for 1996 Eagle Summit Engine Gaskets and Seals
Upgrade Eagle Summits with top-quality Engine Gaskets and Seals parts, including 4 OEM and aftermarket selections for your 1996 model.
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40648)
from
$31.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40672)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 70660)
from
$66.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
Felpro – Engine Conversion Gasket Set (Part No.CS 9887)
from
$67.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
In-Demand Engine Mounts for 1996 Eagle Summits
Select from 11 premium Engine Mounts parts for your 1996 Eagle Summit, with prices ranging from $21.29 to $63.99.
Anchor – Engine Mount: Rear, 1 Piece (Part No.8689)
from
$44.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-94; EAGLE 92-96; MITS 92-95; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 2 Lbs
Anchor – Engine Mount: Left, 1 Piece (Part No.8820)
from
$63.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-94; EAGLE 95-96; MITS 93-95; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 3 Lbs
Anchor – Engine Mount: Left, 1 Piece (Part No.8685)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to EAGLE 92-96; MITS 92-94; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 5 Lbs
Anchor – Engine Mount: Front, Rear, 1 Piece (Part No.9057)
from
$51.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to EAGLE 92-96; MITS 92-96; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 3 Lbs
- WITH WEIGHT
Anchor – Engine Mount: Left, 1 Piece (Part No.8238)
from
$39.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-95; EAGLE 93-96; MITS 93-96; PLYM 93-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-1996
- Weight approx: 3 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.8690)
from
$29.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to EAGLE 92-96; MITS 92-95; PLYM 92-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 2 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8688)
from
$28.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to EAGLE 96-96; MITS 93-95;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-1996
- Weight approx: 2 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8098)
from
$26.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-95; EAGLE 92-96; MITS 93-96; PLYM 93-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1996
- Weight approx: 2 Lbs
Anchor – Engine Mount: Left, 1 Piece (Part No.8206)
from
$25.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 93-95; EAGLE 93-96; MITS 93-96; PLYM 93-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-1996
- Weight approx: 4 Lbs
Anchor – Transmission Mount: Left, Right, 1 Piece (Part No.8619)
from
$24.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to DODGE 85-90; EAGLE 92-96; MITS 87-96; PLYM 85-90;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1996
- Weight approx: 3 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.8112)
from
$21.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to EAGLE 95-96; MITS 93-96;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-1996
- Weight approx: 2 Lbs
- WIDTH: 1 7/8 INCH
- ID: 3/8 INCH
- CENTER-2-CENTER MOUNT HOLES: 3.75 INCH
- BASE TO CENTER ID: 1 3/4 INCH
Most Sold 1996 Eagle Summit Camshafts
Explore our best-selling Eagle parts for the 1996 Summit among 2 OEM and aftermarket options starting from $7.79.
Driveworks – Oil Seal (Part No.S-3771)
from
$9.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.223014)
from
$7.79
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Top-Rated Engine Parts Brands For Your 1996 Eagle Summit
Shop for the best-rated brands offering Engine Parts and other products for your 1996 Eagle Summits. Below you’ll find some of our best rated Engine Parts from Dayco, Dorman, and Imperial, and more. Engine Parts from these brands that fit a 1996 Summit start at just $18.99 and are rated as high as 4.5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1996 Eagle Summit Engine Parts
When it comes to maintaining or upgrading your 1996 Eagle Summit, using quality Engine Parts is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Engine Parts, specifically designed for the 1996 Eagle Summit. With over 2 Dayco brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.99, with an average price of just $58.99. Plus, with over 10 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$33.99
(8)
Premium Timing Belt, 34.49 Inch With 92 Round Tooth
“Very nice quality. You can trust Dacco for a good product”
from
$83.99
(2)
Timing Component Kit Without Belt, Dayco
“This kit had all the required pullies to perfom a complete timing belt change. Exactly fit, easy to replace the old parts.”
Popular Dorman 1996 Eagle Summit Engine Parts
Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1996 Eagle Summit owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1996 Summit, Advance Auto Parts carries a full inventory of 2 Dorman Engine Parts. Plus you will be keeping your Eagle in peak condition while saving money because prices on these Dorman Engine Parts range from $18.99 to $101.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$18.99
(2)
Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each)
“These worked great for making a skidoo secondary clutch tool.”
from
$101.99
(1)
Harmonic Balancer Assembly
“I bought this as a replacement for the old worn out part and it restored power and gas mileage while making the car run more smoothly”
FAQs for 1996 Eagle Summit Engine Parts
Which Engine Parts are best-sellers for 1996 Eagle Summits?
Out of 58 Engine Parts that fit 1996 Eagle Summits, the following parts are the top sellers:
- Engine Crankshaft Seal (15440092) – $9.99
- Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (Sold by each) (16140204) – $14.99
- Engine Crankcase Vent Valve Seal (5189160) – $8.79
What’s the price range for 1996 Eagle Summit Engine Parts?
Engine Part prices for the 1996 Eagle Summit start at $1.79 and go up to $723.99 for the most premium parts.
What’s the average price of a Engine Part for a 1996 Eagle Summit?
The average price for Engine Parts for the 1996 Eagle Summit is $66.99. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Eagle Summit model years?
What are the cheapest Engine Parts for my 1996 Eagle Summit?
The cheapest 1996 Eagle Summit Engine Parts we carry in stock are:
- Steel Cup Expansion Plug 40.08mm, Height 0.450 (Sold by each) (16140160) – $1.79
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (Sold by each) (16140158) – $1.79
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (3492354) – $2.99
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (22972484) – $2.99
- Oil Seal (18442664) – $3.29
What are the top-rated Engine Parts that fit the 1996 Eagle Summit?
Out of 183 reviews by customers, our 1996 Eagle Summit Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1996 Eagle Summit and their top-rated products:
- Valve Cover and Cylinder Heads
- Engine Valve Lifter (3690032) – $17.99
- Engine Gaskets and Seals
- Engine Valve Lifter (3690032) – $17.99
What types of Engine Parts do you sell for my 1996 Eagle Summit?
As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1996 Eagle Summit:
Can I get help with 1996 Eagle Summit Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Eagle Engine Parts and more.
What is your return policy for Eagle Summit Engine Parts?
Advance Auto Parts keeps returns simple. For new Eagle Summit Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
