1996 Chevrolet Tahoe Valve Cover and Cylinder Heads
More 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads
Find your specific 1996 Chevrolet Tahoe original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads
Sealed Power – Engine Valve Spring (Part No.VS-1641)
from
$9.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$147.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
ACDelco – Active Fuel Management Valve Lifter (Part No.12645725)
from
$76.99
ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Adjusts the valves on your vehicle’s engine for proper performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Sealed Power – Engine Valve Lifter (Part No.HT-817)
from
$13.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Dorman – Valve Covers: With Gasket, Direct Replacement, Aluminum, Driver Side (Part No.264-965)
from
$184.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
MTC – Valve Cover (Part No.A31601618100MTC)
from
$136.01
Valve Cover
Sealed Power – Engine Rocker Arm Kit (Part No.R-973)
from
$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
MAHLE Original – Head Set (Part No.HS54660A)
from
$301.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Cylinder Head Gasket Set (Part No.HS 26744 PT)
from
$246.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26192 PT)
from
$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
- HANDLES EXTREME ENGINE CONDITIONS — Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mahle – Cylinder Head Gasket (Part No.A8100580062MAH)
from
$90.52
Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head gaskets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials
- Packaged in shrink wrapped tray
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26749 PT)
from
$73.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Sealed Power – Engine Push Rod (Part No.RP-3349)
from
$6.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Push Rod (Part No.RP-3348)
from
$4.29
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- State-of-the-art manufacturing
- Exceptional material quality
- Exacting tolerances
- Heat treated tips
- Stock or mild modified replacement
- Made in USA
Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)
from
$187.99Product Features:
- Case-Hardened Tubing
- Surface Hardening
- Welded Ends
- 0.3125 in. Diameter
- Use with or without Hardened Steel Guideplates
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72220)
from
$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72390)
from
$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)
from
$31.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Intake Valve (Part No.V-4344)
from
$14.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Exhaust Valve (Part No.V-1904)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Exhaust Valve (Part No.V-4345)
from
$14.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Intake Valve (Part No.V-1926)
from
$4.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Mahle – Mahle Exhaust Valve (Part No.A4050259823MAH)
from
$30.25
MAHLE manufactures intake and exhaust valves in forged and hot-extruded versions in a multitude of materials for gasoline and diesel engines of every size. Depending on the stresses they are subjected to, the valves are reinforced around the seat, hardened, nitrided, or chrome-plated. Sodium-filled hollow valves can be used for extremely high thermal and mechanical loads. Since stresses on the components continue to rise in modern engines, MAHLE is focusing on the ongoing development of cooled valves.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Sealed Power – Engine Intake Valve (Part No.V-4644)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Popular 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads Categories
1996 Chevrolet Tahoe Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1996 Chevrolet Tahoe. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 22 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $185.99. That means you can find the exact parts or products you need to keep that 1996 Chevrolet Tahoe running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1996 Chevrolet Tahoe. Sealed Power, Felpro, and Mahle are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1996 Chevrolet Tahoe, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 107 reviews in this category, some of the top rated parts include Engine Rocker Arm Nut with 5.0 stars and Engine Cylinder Head Gasket Set with 4.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1996 Chevrolet Tahoe rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1996 Chevrolet Tahoe Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1996 Chevrolet Tahoe demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Tahoe the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Sealed Power Valve Cover and Cylinder Heads
We carry Sealed Power parts in our stock across Engine Valves and Push Rods categories, plus more. For a 1996 Chevrolet Tahoe, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Top 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads from Felpro
Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1996 Chevrolet Tahoe. Popular Felpro parts include:
FAQs for 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1996 Chevrolet Tahoe?
Out of 22 Valve Cover and Cylinder Heads for the 1996 Chevrolet Tahoe, the most popular in our inventory are:
What are the top-rated 1996 Chevrolet Tahoe Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1996 Chevrolet Tahoe based on customer reviews/ratings are:
from
$104.99
(1)
Engine Cylinder Head Gasket Set
“Good little kit for the price,But wished it came with all new bolts included as these must be purchaced seperatly,Remember to order these so you have ”
