1996 Chevrolet Express 1500 Drivetrains
Find Your Specific 1996 Chevrolet Express 1500 Drivetrains
Below you will find various in-demand Chevrolet Drivetrains, components and accessories for your 1996 Express 1500. Advance Auto Parts has popular Express 1500 parts like Drive Shafts and Axles, Transfer Cases, 4WD Components and more. You’ll also find aftermarket and OEM Drivetrains for other Express 1500 model years including
2006,
2007,
2008,
2009,
2010,
2011,
2012,
2013,
2014 and more. Select a category of 1996 Chevrolet Express 1500 Drivetrains below and start saving instantly.
Popular 1996 Chevrolet Express 1500 Drivetrains Categories
Essential Drivetrains for 1996 Chevrolet Express 1500s
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Pinion Install Kit For ’08 & Down GM 8.6" Differential (Part No.13073)
from
$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 2008 and down GM 8.6″
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Dorman – Driveshaft Slip Yoke (Part No.697-517)
from
$169.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles.
- Effective fix – replacement restores safe, smooth driveline operation.
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Sealed Power – Engine Balance Shaft Bearing (Part No.3204DR)
from
$14.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Pro-King – Differential Internal Nest Kit (Part No.742G717C)
from
$233.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Minor Install Kit For GM 8.6" Rear Differential (Part No.12059)
from
$101.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)
Product Features:
See More
Product Features:
- Fits GM 8.6″
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-1009)
from
$447.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)
from
$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
USA Standard Gear – Standard Spider Gear Set For 33 Spline GM 9.5" And Pre ’06 GM 9.25IFS (Part No.39029)
from
$214.99
Product Features:
See More
- Spider gear kit
- Fits GM 9.5″ open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
FAG US – SHAFT SEAL (Part No.SS2983)
from
$14.29
SHAFT SEAL
Motive Gear – Performance Differential Ring and Pinion (Part No.G885410)
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
SKF – Differential Bearing (Part No.J70601671569SKF)
from
$61.21
Differential Bearing
FAG US – SHAFT SEAL (Part No.SS2685)
from
$11.29
SHAFT SEAL
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Spool (Part No.FS10-30)
Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)
Yukon Gear – Polished Aluminum Cover For 8.6", 8.2" And 8.5" GM Rear (Part No.32030)
from
$255.99
Polished aluminum cover for 8.6″, 8.2″ and 8.5″ GM rear.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- Finned polished aluminum
Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)
from
$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Richmond Gear – Differential Mini Spool (Part No.78-1028-1)
from
$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)
from
$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
National – Multi Purpose Bearing (Part No.HB-108-D)
from
$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)
from
$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.
Product Features:
See More
Product Features:
- Fits GM 8.5″ with aftermarket positraction
- Works with Heavy Duty Bearings
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – Replacement Bare Case For GM 8.5" & 8.6" Dura Grip (Part No.20107)
from
$386.99
Replacement bare case for GM 8.5″ & 8.6″ Yukon Dura Grip. Fits both 28 & 30 spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a stock positraction.
Product Features:
See More
Product Features:
- Dura Grip positraction carrier case
- Does not include spider gears
- Fits GM 8.5″ and 8.6″
- Fits 2.76 and up ratios only
Upgrade your 1996 Chevrolet Express 1500 with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1996 Chevrolet Express 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your Express 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 310 Drivetrains for the 1996 Chevrolet Express 1500, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1996 Chevrolet Express 1500 at great prices.
Our Drivetrains inventory for this model
ranges from just $1.99 to $1,638.99, with
an average price of $233.17.
Our 310 Drivetrains in stock come from 27 trusted brands, so you’re sure to find the right part for your 1996 Chevrolet Express 1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Chevrolet Express 1500, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline, FELPRO, Moog, and more.
Valvoline Drivetrains
start at just $14.49 and boast an impressive 5 stars average rating from customers.
FELPRO and Moog also bring quality to the table, with Drivetrains available starting at $9.99, and at an average 5 stars rating.
With 1,486 customer reviews and counting, our 1996 Chevrolet Express 1500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1996 Chevrolet Express 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 1500 in top shape, all in one place.
Start shopping confidently below for your 1996 Chevrolet Express 1500!
Best-Selling Drive Shafts and Axles for 1996 Chevrolet Express 1500s
Enhance the driving experience in your Chevrolet with 29 quality Drive Shafts and Axle components, starting at $5.29.
National – Shaft Repair Sleeve (Part No.99174)
from
$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Universal Joint (Part No.DW-331BL)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Pro-King – Differential Axle Seal (Part No.742A074)
from
$6.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Multi Purpose Bearing (Part No.HB-108-D)
from
$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6064)
from
$121.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 96-12;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1988-2012
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.60 INCH / 66 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- WITH PLATE
- WITH STUDS
- STYLE: ROUND FRAME
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)
from
$24.99
Product Features:
See More
- Fits GM 8.6″ and 9.5″
- Sleeve to adapt standard yoke to use late model triple lip pinion seal
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6091)
from
$103.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 94-12;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1988-2012
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- WITHOUT PLATE
- WITH STUDS
Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)
from
$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- 2.800″ O.D.
- 1.620″ I.D.
Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)
Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)
from
$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits 1988 and up GM half ton truck
- 2.800″ O.D.
- 1.620″ I.D.
Yukon Gear – 9.5" GM C/Clip (Part No.33081)
Spicer – Universal Joint (Part No.5-3615X)
from
$51.99
Universal Joint
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
Dorman – Driveshaft Slip Yoke (Part No.697-517)
from
$169.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles.
- Effective fix – replacement restores safe, smooth driveline operation.
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Dorman – Rear Drive Shaft (Part No.936-096)
from
$945.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Yoke For GM 9.5" With A 1350 U/Joint Size (Part No.41077)
from
$209.99
Yukon yoke for GM 9.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses GM3920486 straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
FAG US – AXLE SHAFT REPAIR BE (Part No.DR0151K)
from
$109.99
AXLE SHAFT REPAIR BE
Spicer – Center Support Bearing (Part No.211793-1X)
from
$88.99
Center Support Bearing
FAG – Wheel Bearing (Part No.K8000204410FAG)
from
$75.93
Wheel Bearing
Spicer – Center Support Bearing (Part No.211260X)
from
$66.99
Center Support Bearing
Autopart International Inc – Wheel Bearing (Part No.K8000651790API)
from
$44.91
Wheel Bearing
FAG US – AXLE BEARING (Part No.FC68302)
from
$35.49
AXLE BEARING
Most Popular 1996 Chevrolet Express 1500 Transfer Cases
Customize your Chevrolet with 4 Transfer Cases products
like Input Shaft Bearings and
Transfer Case Vents, all
priced under $15.99.
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Auto Transmission Case Vent (Part No.14689)
from
$6.99
This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles.
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
FAG US – CUP (Part No.M88010)
from
$11.29
CUP
Top Picks for 1996 Chevrolet Express 1500 4WD Components
Upgrade Chevrolet Express 1500s with top-quality 4WD Components parts, including 1 OEM and aftermarket selections for your 1996 model.
Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)
from
$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
In-Demand Differentials for 1996 Chevrolet Express 1500s
Select from 247 premium Differentials parts for your 1996 Chevrolet Express 1500, with prices ranging from $1.99 to $1,638.99.
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Driveworks – Oil Seal (Part No.S-2043)
from
$7.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)
Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)
Felpro – Differential Cover Gasket (Part No.RDS 55028-1)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)
National – Bearings (Part No.M802048)
from
$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rear Differential Cover (Part No.697-700)
from
$32.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
- Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
- Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Ring and Pinion (Part No.GM10-373)
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RMK)
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RMKT)
from
$135.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG & SEAL GM 10 BOLT MASTER NON IFS FRONT / REAR
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10REMK)
from
$113.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 10 BOLT 8.5″ MSTR KIT W/EATON OR AUBURN PRO
Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)
Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-100)
from
$195.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
- Related repair – smart to have on hand when installing a differential ring and pinion.
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.49
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – Ring Gear Bolt (Part No.33049)
from
$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
- 7/16″ x 20
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Dorman – Help – Pinion Crush Sleeves (Part No.81057)
from
$5.29
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Roller Bearing (Part No.S-M-802048)
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Crush Sleeve (Part No.1234726)
from
$4.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Motive Gear – Differential Carrier (Part No.GM8.6L)
from
$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)
from
$48.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)
from
$74.99
Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.
Product Features:
See More
Product Features:
- Fits GM 8.2″, 8.5″ and 8.6″
- Chrome
Yukon Gear – Pinion Nut (Part No.33152)
from
$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
- 7/8″ x 14 thread
- 1 1/4″ socket
USA Standard Gear – Standard Spider Gear Set For GM 8.5", 30 Spline (Part No.39027)
from
$214.99
Product Features:
See More
- Spider gear kit
- Fits GM 8.5″ 30 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)
from
$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)
from
$57.99
Product Features:
See More
- Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
Yukon Gear – Pinion Seal For GM 8.5", 8.2", Buick, Oldsmobile, And Pontiac (Part No.30017)
from
$9.99
Pinion seal for GM 8.5″, 8.2″, Buick, Oldsmobile, and Pontiac.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits GM 8.5″ rear, 8.2″ and 8.2″ in Buick, Oldsmobile and Pontiac
Motive Gear – Performance Differential Ring and Pinion (Part No.G885488)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Standard Open Cross Pin (0.795" Diameter) For 8.5" GM – Fits Some Eaton Positractions (Part No.33401)
from
$49.99
Standard open cross pin (0.795″ diameter) for 8.5″ GM. fits some Eaton positractions.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 8.5″ and 8.6″
- Fits standard open differentials only
- 0.795″ diameter
Yukon Gear – 9.5" GM Cover Gasket (Part No.23023)
Yukon Gear – Crush Sleeve (Part No.33099)
from
$13.99
Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
- 0.640″ tall
Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)
from
$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for GM 8.5″ and 8.6″
- Fits standard open differentials only
- 0.795″ I.D.
Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)
from
$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″ with 30 spline axles
- 2.73 ratio and up only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Pro-King – Differential Rebuild Kit (Part No.742G004)
from
$82.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.
Product Features:
See More
Product Features:
- Contains the highest quality Japanese bearings
Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)
from
$29.99
9.5″ GM differential carrier Supershim kit.
Product Features:
See More
Product Features:
- Super carrier shim kit for GM 9.5″
- Interlocking design makes installation much easier
Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)
from
$12.99
GM 9.5″ ring gear bolt. 12mm x 1.5.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 9.2″
- 12mm x 1.5
Most Sold 1996 Chevrolet Express 1500 Universal Joints
Explore our best-selling Chevrolet parts for the 1996 Express 1500 among 26 OEM and aftermarket options starting from $2.59.
Neapco – Universal Joint (Part No.1-0025)
Neapco – Universal Joint (Part No.2-3010)
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Universal Joint (Part No.DW-331)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)
from
$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Neapco – Universal Joint (Part No.2-3011)
Neapco – Universal Joint (Part No.2-0053)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331C)
from
$42.99
Backed by superior materials and rigorous testing, MOOG Anti-Galvanic universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installations.
Product Features:
See More
Product Features:
- INHIBITS GALVANIC REACTION — Designed specifically for aluminum yokes to avoid a galvanic reaction that leads to corrosion
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- CORROSION PROTECTION — Bearing cups and snap rings are chemically-coated to protect aluminum yokes
- KEEPS DIRT OUT — Nitrile rubber grease seals with double lip design protects components from wear-causing contaminants
- GREASABLE DESIGN — Radial design of bearing cups allows 360 Degrees lubricant distribution to all bearing surfaces to flush out contaminants and moisture to reduce corrosion and wear
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)
from
$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
See More
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Yukon Gear – Mechanics 3R Lifetime Series U/Joint (Part No.42020)
from
$65.99
Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.
See More
Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)
from
$23.99
7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.
Product Features:
See More
Product Features:
- u-joint strap
- Fits GM 7.5″, 7.625″ and 8.5″
- Mechanics 3R u-joint size
- One single strap
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)
from
$449.99
Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$359.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)
Spicer – Universal Joint (Part No.5-1350-1X)
from
$49.99
Universal Joint
Yukon Gear – Mechanics 3R U/Joint (Part No.42014)
from
$46.99
Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.
See More
Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)
from
$17.99
U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
- 1350 and 1410 u-joint size
- Includes two straps and four bolts
Neapco – Universal Joint (Part No.2-0052)
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
Top-Rated Drivetrains Brands For Your 1996 Chevrolet Express 1500
Shop for the best-rated brands offering Drivetrains and other products for your 1996 Chevrolet Express 1500s. Below you’ll find some of our best rated Drivetrains from Valvoline, FELPRO, and Moog, and more. Drivetrains from these brands that fit a 1996 Express 1500 start at just $9.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1996 Chevrolet Express 1500 Drivetrains
When it comes to maintaining or upgrading your 1996 Chevrolet Express 1500, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1996 Chevrolet Express 1500. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$14.49
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”
I pu”
Popular FELPRO 1996 Chevrolet Express 1500 Drivetrains
FELPRO auto parts is one of the highest quality Drivetrain brands in the market. Any 1996 Chevrolet Express 1500 owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1996 Express 1500, Advance Auto Parts carries a full inventory of 1 FELPRO Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FELPRO Drivetrains range up to $9.99, plus, with more than 195 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$9.99
$9.99
(195)
“Product easy to put on and easy to work with worked great so far”
FAQs for 1996 Chevrolet Express 1500 Drivetrains
Which Drivetrains are best-sellers for 1996 Chevrolet Express 1500s?
Out of 310 Drivetrains that fit 1996 Chevrolet Express 1500s, the following parts are the top sellers:
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Greaseable Super Strength Universal Joint (10086947) – $36.99
What’s the price range for 1996 Chevrolet Express 1500 Drivetrains?
Drivetrain prices for the 1996 Chevrolet Express 1500 start at $1.99 and go up to $1,638.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1996 Chevrolet Express 1500?
The average price for Drivetrains for the 1996 Chevrolet Express 1500 is $233.17. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Chevrolet Express 1500 model years?
What are the cheapest Drivetrains for my 1996 Chevrolet Express 1500?
The cheapest 1996 Chevrolet Express 1500 Drivetrains we carry in stock are:
- Differential Ring Gear Bolt (10282159) – $1.99
- Ring Gear Bolt (20520168) – $2.49
- Spindle Washer – I.D. 20.1mm O.D. 44.0mm Thickness 2.6mm (sold by each) (22148791) – $2.49
- Differential Pinion Gear Washer (10282533) – $2.59
- Universal Joint (18270063) – $2.59
What are the top-rated Drivetrains that fit the 1996 Chevrolet Express 1500?
Out of 1,486 reviews by customers, our 1996 Chevrolet Express 1500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1996 Chevrolet Express 1500 and their top-rated products:
- Universal Joints
- Universal Joint (18270063) – $2.59
- Universal Joint (5270038) – $8.99
- Universal Joint (10265721) – $15.99
What types of Drivetrains do you sell for my 1996 Chevrolet Express 1500?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1996 Chevrolet Express 1500:
Can I get help with 1996 Chevrolet Express 1500 Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.
What is your return policy for Chevrolet Express 1500 Drivetrains?
Advance Auto Parts keeps returns simple. For new Chevrolet Express 1500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
