1996 Chevrolet C2500 Performance and Racing Products

Essential 1996 Chevrolet C2500 Performance and Racing Products

MSD Ignition – Harness; MSD to Late Model; GMs; 96-on (Part No.8877)

Harness; MSD to Late Model; GMs; 96-on

from

$72.99
MSD Ignition control are easy to install, but we also offer several direct plug-in harnesses for late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Product Features:
  • Plug-In Harness w/Color Coded Wires
  • No Cutting Or Splicing
  • Quick Easy Installation
  • Provides A Direct Plug-In Installation
  • When Adding An MSD Ignition Control
See More

B & M – Holeshot 2400 (Part No.70441)

Holeshot 2400

from

$709.99
Holeshot 2400 for GM 1998 to 2002 4L60E Camaro and Firebird with an LS1 engine Application: GM 1998 to 2002 4L60E Camaro and Firebird with LS1 A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benef

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5822)

Ultra Seal: Intake Gasket

from

$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

from

$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Accel – High Performance Distributor Cap for Chevy/GMC Vortec V8 (Part No.120141)

High Performance Distributor Cap for Chevy/GMC Vortec V8

from

$89.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Brass inserts provide for high spark energy flow
  • Polyester Glass Filled For Durability
  • Heavy duty for maximum energy transfer
See More

Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)

High-Performance Distributor Rotor for GM 4.3L-7.4L Engines

from

$29.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:
  • Max stability for all RPM ranges
  • Heavy duty for maximum energy transfer
  • Fits Most Stock And Modified Distributors
  • Polyester Glass Filled For Durability
See More

Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)

Super Competition Header Gasket

from

$23.29
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:
  • Tear Resistant
  • Precisely Cut To Match Header
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

Leaf Spring Bushing Set

from

$91.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Engine Crankshaft Seal Kit

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.57-3026)

Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Edelbrock – Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy (Part No.7070)

Victor Ram 23-Degree Intake Manifold Base for Small-Block Chevy

from

$576.99
Product Features:
  • 6500-10000 RPM Range
  • Dual Plane Quad Type – 4150 Style Flange
  • 7.13 in. Front Height, 7.13 in. Center Height, 7.13 in. Rear Height
  • Satin Finish
  • Base Only
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885308)

Performance Differential Ring and Pinion

from

$228.99


Product Features:
  • GM 10BL 8.5 R/P 3.08 FRT/REAR MGP
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Oil Pan Bolt Kit

from

$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Energy Suspension – Hyper-Flex System (Part No.3.18107G)

Hyper-Flex System

from

$377.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3147G)

Control Arm Bushing Set

from

$87.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Spectre – SBC Aluminum Center Bolt Valve Cover (Part No.4995)

SBC Aluminum Center Bolt Valve Cover

from

$214.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1987-1999 Chevrolet 305 and 1987-2000 Chevrolet 350 Center bolt engines, this valve cover features polished aluminum construction and a ball milled design. Sold in pairs, this stock profile cover includes baffles and bolts to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:
  • Designed for 1987-1999 Chevrolet 305 and 1987-2000 Chevrolet 350 Center bolt engines
  • Baffled for breather system compatibility
  • Sold in pairs
  • Polished aluminum construction
  • Stock height
  • Features OEM style sealing edge
  • Includes bolts for installation
See More

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

Shift Improver Kit For 93-02 4L60E

from

$73.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Fram – High Performance Spin-on Oil Filter: Ideal for Racing Oil (Part No.HP4)

High Performance Spin-on Oil Filter: Ideal for Racing Oil

from

$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

Product Features:
  • Proven protection for up to 10,000 miles
  • Engineered for use with synthetic or conventional motor oils
  • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
  • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
See More

Dynomax – Dual – 2.5in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17363)

Dual - 2.5in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$759.99
DynoMax® Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglas

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
  • Dyno proven to flow up to 700 SCFM
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4122G)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

MSD Ignition – Distributor; Street Fire; GM V8 Vortec; 96-00 (Part No.5592)

Distributor; Street Fire; GM V8 Vortec; 96-00

from

$373.99
These Street Fire distributors are ready to drop into your V8 engine to replace the worn OEM piece. A factory style ignition module is included along with a durable new cap and rotor. GM moved to this distributor in the late 1990s and only used them for a few years. The unique flat cap design acts as a ‘correct-a-cap’ meaning that the even number spark plug wires are all on the passenger side while the odd numbers are all on the driver’s side.

Product Features:
  • Great OEM Update; w/Performance Upgrades
  • Unique Flat Cap Design Acts As A Correct-A-Cap
  • Odd Wires On Driver Side; Even On The Passenger
  • Perfect For Budget Minded Enthusiasts
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$62.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)

Tst GM 96-00 5.0/5.7L Vortech

from

$236.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Complete Super Tune Kit
  • 8mm Spiral Core Wires
  • Accel Classic Core Plugs
  • High Performance Cap And Rotor
  • Reduced Emissions
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

Control Arm Bump Stop Set

from

$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Spectre – Differential Cover (Part No.6080)

Differential Cover

from

$59.99
Spectre’s Chrome GM Differential Covers feature a 14 bolt design and include the chrome bolts and gasket needed for an easy install. Made to OEM specifications these differential covers are triple chrome plated ensuring they perform as well as they look. This product fits the following vehicles with a 9.5 inch ring gear: 1981 and up Chevy/GMC (rear), 1973-1995 Chevy/GMC 3/4 ton-1 ton 2/4 wheel drive (rear). Includes 14 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • Fits the following vehicles with 9.5″ ring gear: ’81-up Chevy/GMC (rear), ’73-’95 Chevy/GMC 3/4-1 ton 2/4WD (rear)
  • Triple chrome plated
  • 14 bolt design cover
  • 14 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5178G)

Sway Bar Bushing Set

from

$46.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Popular 1996 Chevrolet C2500 Performance and Racing Products Categories

1996 Chevrolet C2500 Performance and Racing Products

You count on your 1996 Chevrolet C2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 111 Performance and Racing Products ranging in price from $5.99 to $1,117.00, you’re sure to find everything you need for your 1996 Chevrolet C2500.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 23 different brands like Energy Suspension, Accel, and FEL-PRO Performance. 1996 Chevrolet C2500 Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 683 extensive product reviews on 1996 Chevrolet C2500 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter with 4.7 stars and High Performance Spin-on Oil Filter: Ideal for Racing Oil with 4.9 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1996 Chevrolet C2500 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1996 Chevrolet C2500

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Chevrolet C2500 running right for years to come. In our inventory you’ll find brands like Energy Suspension, Accel, FEL-PRO Performance, and even more.

Popular Edelbrock Performance and Racing Products

You’ll find popular Edelbrock brand products across Performance Engines. All are waiting to get your 1996 Chevrolet C2500 back on the road. Some of the top-rated Edelbrock products in these categories are:
Intake Manifold Gasket for E-Tec 170 Small-Block Chevy
from $44.99
(1)
Intake Manifold Gasket for E-Tec 170 Small-Block Chevy
Performance Engine Intake Manifold Gaskets

Top-Rated Accel Performance and Racing Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1996 Chevrolet C2500, and some of our most reviewed Accel parts include:
High-Performance Distributor Rotor for GM 4.3L-7.4L Engines
from $29.49
(37)
High-Performance Distributor Rotor for GM 4.3L-7.4L Engines
Performance Distributor Rotors
High Performance Distributor Cap for Chevy/GMC Vortec V8
from $89.99
(32)
High Performance Distributor Cap for Chevy/GMC Vortec V8
Performance Distributor Caps
Tst GM 96-00 5.0/5.7L Vortech
from $236.99
(14)
Tst GM 96-00 5.0/5.7L Vortech
Performance Distributor Cap and Rotor Kits

FAQs for 1996 Chevrolet C2500 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1996 Chevrolet C2500?

Out of 111 Performance and Racing Products for the 1996 Chevrolet C2500, the most popular in our inventory are:
High Performance Transmission Mount for Street & Racing Vehicles
from $41.99
(17)
High Performance Transmission Mount for Street & Racing Vehicles
Performance Engine and Transmission Mounts
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets

What are the top-rated 1996 Chevrolet C2500 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1996 Chevrolet C2500 based on customer reviews/ratings are:
Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter
from $349.99
(19)
Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter
“Great and fast service delivery within three days and product is worth it .”
High Performance Spin-on Oil Filter: Ideal for Racing Oil
from $16.99
(9)
High Performance Spin-on Oil Filter: Ideal for Racing Oil
“Worked as it should”
Hei Remote Mount Super Coil
from $65.99
(7)
Hei Remote Mount Super Coil
“works pretty good”