1996 Buick Roadmaster Suspension Parts

Essential Suspension Parts for 1996 Buick Roadmasters

Dorman – Help – Control Arm Bolt Kit (Part No.13505)

Control Arm Bolt Kit

from

$46.99
The Dorman Suspension Control Arm Bolt Kit includes all necessary components to secure the control arm to the vehicles chassis system. The bolts and hardware available in this repair kit are made from high-quality materials and designed to provide a longer service life.

Product Features:
  • Direct replacement for a proper fit every time
  • Durable steel construction for a longer service life
  • Secures suspension to vehicle frame
  • Manufactured to strict engineering quality standards
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP15813)

Control Arm Shaft Kit

from

$162.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

Multi-Purpose Relay

from

$51.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest – Multi Purpose Relay (Part No.83A1008)

Multi Purpose Relay

from

$17.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

MOOG – Coil Spring Set (Part No.5245)

Coil Spring Set

from

$104.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

TRW – Control Arm Stop (Part No.L2060451692TRW)

Control Arm Stop

from

$16.11
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Stop is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

KYB – Gas Shock (Part No.343130)

Gas Shock

from

$53.99
Product Features:
  • Recommended OEM replacement shock for classic, domestic cars
  • Specifically calibrated to help restore original handling and control characteristics
  • Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
  • Triple chrome plated piston rod and multi-lip oil seals that reduce wear
  • Solid seamless mounting eye rings and bolt bushings to eliminate rattles
See More

Monroe – Load Adjusting Shock Absorber (Part No.58263)

Load Adjusting Shock Absorber

from

$113.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)

Monroe Shock Absorber Air Hose Kit

from

$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1320)

4-Way Male Gray Multi-Purpose Pigtail

from

$61.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Suspension Control Arm Bushing Kit (Part No.533-446)

Suspension Control Arm Bushing Kit

from

$9.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Control Arm Bushing Kit (Part No.K6109)

Control Arm Bushing Kit

from

$24.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA819)

Max-Air Air Shock Absorber

from

$155.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA727)

Max-Air Air Adjustable Air Shock Absorber Pack of 2

from

$106.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Rare Parts – Coil Spring Insul (Part No.RP46353)

Coil Spring Insul

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

MOOG – Coil Spring Insulator (Part No.K6203-2)

Coil Spring Insulator

from

$5.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Dorman – Suspension Air Compressor, With Wire Set And Mounting Hardware (Part No.949-034)

Suspension Air Compressor, With Wire Set And Mounting Hardware

from

$362.99
This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications.
  • Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout.
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Monroe – Air Shock Accessory Kit (Part No.AK16)

Air Shock Accessory Kit

from

$20.49
Monroe® Air Shock Accessory Kits are universal replacement air fittings and/or adapters, for installation of Monroe air shocks and struts.

Product Features:
  • Replacement T-Fittings.
  • Airline adapters for shocks
  • Airline adapters for struts
  • Replacement airline kits
  • Each kit sold separately
See More

Monroe – Gas-Matic Truck Shock Absorber (Part No.59001)

Gas-Matic Truck Shock Absorber

from

$48.49
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic light trucks and vans
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)

Gas-Matic Passenger Car Shock Absorber

from

$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

MOOG – Coil Spring Set (Part No.CS578)

Coil Spring Set

from

$151.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Body Bolt M6-1.0 x 25mm

from

$3.79
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards.
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Upgrade your 1996 Buick Roadmaster with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1996 Buick Roadmaster, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Suspension Parts are key to keeping your Roadmaster functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Suspension Parts for the 1996 Buick Roadmaster, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Coil and Leaf Springs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1996 Buick Roadmaster at great prices. Our Suspension Parts inventory for this model ranges from just $3.79 to $362.99, with an average price of $50.63. Our 67 Suspension Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1996 Buick Roadmaster without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Buick Roadmaster, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Monroe, Moog, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Monroe and Moog also bring quality to the table, with Suspension Parts available starting at $5.29, and at an average 4 stars rating. With 1,775 customer reviews and counting, our 1996 Buick Roadmaster Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Buick Roadmaster is always ready to roll. We’re committed to providing you with everything you need to keep your Roadmaster in top shape, all in one place. Start shopping confidently below for your 1996 Buick Roadmaster!

Best-Selling Shocks and Struts for 1996 Buick Roadmasters

Enhance the driving experience in your Buick with 13 quality Shocks and Strut components, starting at $13.29.

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5906)

OESpectrum Passenger Car Shock Absorber

from

$59.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5955)

OESpectrum Passenger Car Shock Absorber

from

$37.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55802)

Gas-Matic Passenger Car Shock Absorber

from

$44.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Gas Shock (Part No.343157)

Gas Shock

from

$46.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)

Gas-Matic Passenger Car Shock Absorber

from

$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5802)

OESpectrum Passenger Car Shock Absorber

from

$76.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG4515)

High Pressure Monotube Gas Shock

from

$72.99
Product Features:
  • Adds up to 25% more damping performance over original equipment shocks
  • Components and valving designed specifically for classic cars
  • High gas pressure design provides instant, extra control
  • Monotube design outperforms all other standard shock absorbers
  • Unique, air-free, hydraulic unit eliminates performance fade
See More

KYB – Gas Shock (Part No.343130)

Gas Shock

from

$53.99
Product Features:
  • Recommended OEM replacement shock for classic, domestic cars
  • Specifically calibrated to help restore original handling and control characteristics
  • Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
  • Triple chrome plated piston rod and multi-lip oil seals that reduce wear
  • Solid seamless mounting eye rings and bolt bushings to eliminate rattles
See More

Belltech – Nitrogen Gas Charged, 2Year Warranty, Not Adjustable, Without Shock Boot, Single (Part No.2209IH)

Nitrogen Gas Charged, 2Year Warranty, Not Adjustable, Without Shock Boot, Single

from

$71.99
Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV pitch and roll, dive and squat to help keep you confident and in control. The Progressive rebound tuning will complement large aftermarket wheels, keeping the ride smooth but firm and in control.

Product Features:
  • The Ultimate In Premium Street Performance Solution
  • Oversized Construction Provides Additional Damping Control
  • Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
  • Increase In Handling And Performance At Maximum Comfort
See More

Belltech – Nitrogen Gas Charged, Two Year Warranty, Non Adjustable Valving, Single (Part No.10103I)

Nitrogen Gas Charged, Two Year Warranty, Non Adjustable Valving, Single

from

$71.99
Belltech street performance shock absorber has been engineered to provide a premium quality ride for todays larger Trucks and Luxury SUVs. Belltech engineers have developed a great balance between comfort and performance by focusing their attention on tuning the low speed compression and rebound characteristics of this shock absorber

Product Features:
  • Belltech Value Orientated Performance Shock Absorber. The Ultimate In Premium Street Performance Solution
  • Excellent OEM Quality Replacement Upgrade. Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
  • Oversized Construction Provides Additional Damping Control. Increase In Handling And Performance At Maximum Comfort
  • Complements Larger OE And Aftermarket Wheel Or Tire Packages For Increased Tire Contact Area
See More

Most Popular 1996 Buick Roadmaster Coil and Leaf Springs

Customize your Buick with 10 Coil and Leaf Springs products like Shock Absorber and Coil Spring Assemblies, Coil Spring Sets, and Coil Spring Insulators, all priced under $186.99.

MOOG – Coil Spring Insulator (Part No.K160044)

Coil Spring Insulator

from

$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

MOOG – Coil Spring Set (Part No.CC621)

Coil Spring Set

from

$142.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Insulator (Part No.K6203-2)

Coil Spring Insulator

from

$5.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Monroe – Load Adjusting Shock Absorber (Part No.58263)

Load Adjusting Shock Absorber

from

$113.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58574)

Load Adjusting Shock Absorber

from

$186.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

MOOG – Coil Spring Set (Part No.CS578)

Coil Spring Set

from

$151.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.5245)

Coil Spring Set

from

$104.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-920917)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$81.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Rare Parts – Coil Spring Insul (Part No.RP46353)

Coil Spring Insul

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Rare Parts – Coil Spring Insulator (Part No.RP47081)

Coil Spring Insulator

from

$21.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Top Picks for 1996 Buick Roadmaster Air Suspension and Kits

Upgrade Buick Roadmasters with top-quality Air Suspension and Kits parts, including 16 OEM and aftermarket selections for your 1996 model.

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Body Bolt M6-1.0 x 25mm

from

$3.79
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards.
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA819)

Max-Air Air Shock Absorber

from

$155.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)

Monroe Shock Absorber Air Hose Kit

from

$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1236)

Multi Purpose Relay

from

$28.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Gray Multi-Purpose Relay (Part No.13503102)

Gray Multi-Purpose Relay

from

$8.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest – Multi Purpose Relay (Part No.83A1008)

Multi Purpose Relay

from

$17.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

ACDelco – Multi-Purpose Wire Connector (Part No.PT2784)

Multi-Purpose Wire Connector

from

$37.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

Multi-Purpose Relay

from

$51.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Suspension Air Compressor, With Wire Set And Mounting Hardware (Part No.949-034)

Suspension Air Compressor, With Wire Set And Mounting Hardware

from

$362.99
This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications.
  • Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout.
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1320)

4-Way Male Gray Multi-Purpose Pigtail

from

$61.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Air Suspension Compressor Motor Connector (Part No.PTA1776)

Air Suspension Compressor Motor Connector

from

$36.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better
See More

Carquest Premium – Repair Harness (Part No.PTA1223)

Repair Harness

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1256)

Multi Purpose Relay

from

$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Monroe – Air Shock Accessory Kit (Part No.AK16)

Air Shock Accessory Kit

from

$20.49
Monroe® Air Shock Accessory Kits are universal replacement air fittings and/or adapters, for installation of Monroe air shocks and struts.

Product Features:
  • Replacement T-Fittings.
  • Airline adapters for shocks
  • Airline adapters for struts
  • Replacement airline kits
  • Each kit sold separately
See More

In-Demand Control Arms for 1996 Buick Roadmasters

Select from 28 premium Control Arms parts for your 1996 Buick Roadmaster, with prices ranging from $6.99 to $162.99.

Driveworks – Control Arm Bushing (Part No.DW-K6198B)

Control Arm Bushing

from

$13.79
Control Arm Bushing

MOOG – Control Arm Bushing Kit (Part No.K6198)

Control Arm Bushing Kit

from

$21.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

TRW – Control Arm Stop (Part No.L2060451692TRW)

Control Arm Stop

from

$16.11
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Stop is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

MOOG – Control Arm Bumper (Part No.K6606)

Control Arm Bumper

from

$16.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

MOOG – Control Arm Bushing Kit (Part No.K6109)

Control Arm Bushing Kit

from

$24.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Dorman – Help – Control Arm Bolt Kit (Part No.13505)

Control Arm Bolt Kit

from

$46.99
The Dorman Suspension Control Arm Bolt Kit includes all necessary components to secure the control arm to the vehicles chassis system. The bolts and hardware available in this repair kit are made from high-quality materials and designed to provide a longer service life.

Product Features:
  • Direct replacement for a proper fit every time
  • Durable steel construction for a longer service life
  • Secures suspension to vehicle frame
  • Manufactured to strict engineering quality standards
See More

Dorman – Help – Lower Control Arm Bumper (Part No.31061)

Lower Control Arm Bumper

from

$9.49
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Control Arm Shaft Kit (Part No.K6210)

Control Arm Shaft Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

MOOG – Control Arm Bushing (Part No.K6111)

Control Arm Bushing

from

$42.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Rare Parts – Control Arm Bushing (Part No.RP15200)

Control Arm Bushing

from

$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Driveworks – Control Arm Bushing (Part No.DW-K6109B)

Control Arm Bushing

from

$18.79
Control Arm Bushing

Rare Parts – Control Arm Shaft Kit (Part No.RP15813)

Control Arm Shaft Kit

from

$162.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

Rare Parts – Control Arm Bushing (Part No.RP15265)

Control Arm Bushing

from

$88.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

MOOG – Control Arm Bushing Kit (Part No.K6409)

Control Arm Bushing Kit

from

$78.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Rare Parts – Control Arm Bushing (Part No.RP15228)

Control Arm Bushing

from

$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Dorman – Control Arm Shaft Kit (Part No.521-172)

Control Arm Shaft Kit

from

$53.99
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Control Arm Shaft Kit (Part No.521-171)

Control Arm Shaft Kit

from

$45.99
This suspension control arm shaft kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment control arm shafts on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Control Arm Bushing (Part No.K5262)

Control Arm Bushing

from

$43.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

TRW – Control Arm Bushing (Part No.L2030364638TRW)

Control Arm Bushing

from

$40.35
Control Arm Bushing

TRW – Control Arm Bushing Kit (Part No.L2040457121TRW)

Control Arm Bushing Kit

from

$40.07
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Kit includes bushings and hardware – (SEE Note)
See More

Dorman – Suspension Control Arm Bushing Kit (Part No.533-781)

Suspension Control Arm Bushing Kit

from

$38.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm Bushing (Part No.RP15897)

Control Arm Bushing

from

$26.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

TRW – Control Arm Bushing (Part No.L2040212883TRW)

Control Arm Bushing

from

$15.33
Control Arm Bushing

MOOG – Control Arm Bushing (Part No.K3113)

Control Arm Bushing

from

$12.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Dorman – Suspension Control Arm Bushing Kit (Part No.533-437)

Suspension Control Arm Bushing Kit

from

$9.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing Kit (Part No.533-446)

Suspension Control Arm Bushing Kit

from

$9.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Control Arm Stop (Part No.L2060613441DOR)

Control Arm Stop

from

$7.68
Control Arm Stop

Dorman – Suspension Control Arm Bumper (Part No.533-615)

Suspension Control Arm Bumper

from

$6.99
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Top-Rated Suspension Parts Brands For Your 1996 Buick Roadmaster

Shop for the best-rated brands offering Suspension Parts and other products for your 1996 Buick Roadmasters. Below you’ll find some of our best rated Suspension Parts from Valvoline, Monroe, and Moog, and more. Suspension Parts from these brands that fit a 1996 Roadmaster start at just $5.29 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1996 Buick Roadmaster Suspension Parts

When it comes to maintaining or upgrading your 1996 Buick Roadmaster, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1996 Buick Roadmaster. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Monroe 1996 Buick Roadmaster Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1996 Buick Roadmaster owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1996 Roadmaster, Advance Auto Parts carries a full inventory of 14 Monroe Suspension Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Monroe Suspension Parts range from $13.29 to $186.99, plus, with more than 141 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

OESpectrum Passenger Car Shock Absorber
from
$59.99

(4)

OESpectrum Passenger Car Shock Absorber

“Perfect fit”

Max-Air Air Shock Absorber
from
$155.99

(2)

Max-Air Air Shock Absorber

“Everything worked great with my factory Cadillac Fleetwood air suspension on rear exact fit.

Only con: recommended unnecessary adapter kit which I h”

Air Shock Accessory Kit
from
$20.49
This product is not rated

Air Shock Accessory Kit

“”

FAQs for 1996 Buick Roadmaster Suspension Parts

Which Suspension Parts are best-sellers for 1996 Buick Roadmasters?

Out of 67 Suspension Parts that fit 1996 Buick Roadmasters, the following parts are the top sellers:

What’s the price range for 1996 Buick Roadmaster Suspension Parts?

Suspension Part prices for the 1996 Buick Roadmaster start at $3.79 and go up to $362.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1996 Buick Roadmaster?

The average price for Suspension Parts for the 1996 Buick Roadmaster is $50.63. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Buick Roadmaster model years?

Yes, we currently carry Suspension Parts for 14 model years of Buick Roadmasters between 1950 and 1995. Suspension Parts are bought most frequently for the following model years: 1995, 1994, 1993, 1992, 1991, 1958, 1957, 1956, and 1955.

What are the cheapest Suspension Parts for my 1996 Buick Roadmaster?

The cheapest 1996 Buick Roadmaster Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 1996 Buick Roadmaster?

Out of 1,775 reviews by customers, our 1996 Buick Roadmaster Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1996 Buick Roadmaster and their top-rated products:

What types of Suspension Parts do you sell for my 1996 Buick Roadmaster?

Can I get help with 1996 Buick Roadmaster Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Suspension Parts and more.

What is your return policy for Buick Roadmaster Suspension Parts?

Advance Auto Parts keeps returns simple. For new Buick Roadmaster Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.