1995 Toyota Corolla Clutch Systems
More 1995 Toyota Corolla Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1995 Toyota Corolla, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1995 Toyota Corolla Clutch Systems
NSK – TKZ Clutch Release Bearing (Part No.I202084535NSK)
from
$38.33
Lightweight, low-cost bearings for optimum performance and extended operating life In response to continued requirements for improved fuel efficiency and greater environmental friendliness, NSK has developed TKZ clutch release bearings – lightweight and lLow torque – By adopting inner-ring rotation and light-contact seals, low torque is achieved while grease leakage is minimized.Low noise – The noise level of TKZ bearings is less than 55 dB when new. No shaft wear With NSK’s new resin sleeve, even aluminum shafts are free from wear.
See More
Nachi – Self-Aligning Clutch Release Bearing (Part No.I2020326957NAC)
from
$22.72
NACHI Self-aligning Clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Design for high temperature, and high rotating speed.
- Design for exclusive use in manual transmission clutch.
- Designed with aligning function and positioning features .
- Low-friction factor resin reduces rotation abrasion of the axle.
Koyo – Clutch Release Bearing (Part No.I202025718KOY)
from
$21.11
Koyo designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Product Features:
See More
Product Features:
- Extended service life
- Compact, lightweight design
- Sealed for life with high performance, application-specific grease
- Integrated functionality
- Design for high temperature, and high rotating speed
Driveworks – Clutch Release Bearing (Part No.S-614152)
LuK – Clutch Master Cylinder (Part No.LMC268)
from
$56.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Master Cylinder (Part No.LMC316)
from
$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
AISIN – Clutch Master Cylinder (Part No.I3000307981ASC)
from
$96.30
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability.
Product Features:
See More
Product Features:
- Precision honing of hydraulic cylinders are monitored under OE quality control standards
- Anodizing and Kanizen plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Heat resistant and extended life Ethylene Propylene Rubber (EPDM) seals prevent leakage
- Quick response design reacts to driver’s clutch and brake
LuK – Clutch Master Cylinder (Part No.LMC396)
from
$59.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Kit: 7 7/8" Disc Diameter, 1" Input Shaft Diameter, 21 Tooth Spline (Part No.16-042)
from
$111.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 8 13/16" Disc Diameter, 1 3/16" Input Shaft Diameter, 21 Tooth Spline (Part No.16-065)
from
$172.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 8 1/4" Disc Diameter, 1" Input Shaft Diameter, 21 Tooth Spline (Part No.16-055)
from
$151.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 7 1/2" Disc Diameter, 1" Input Shaft Diameter, 21 Tooth Spline (Part No.16-066)
from
$131.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 7 7/8" Disc Diameter, 1" Input Shaft Diameter, 21 Tooth Spline (Part No.04-152)
from
$122.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – OE Quality Flywheel (Part No.LFW388)
from
$127.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LUK – Flywheel (Part No.I1000845332LUK)
from
$104.40
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
LUK – Flywheel (Part No.I1000835812LUK)
from
$193.14
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
LuK – OE Quality Flywheel (Part No.LFW212)
from
$74.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LuK – OE Quality Flywheel (Part No.LFW244)
from
$111.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
AISIN – Clutch Disc (Part No.I2010175958ASC)
from
$107.49
Engineered to exacting OE Specifications, The AISIN Clutch Disc is designed to deliver optimal drivetrain efficiency. One of Asian’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.
Product Features:
See More
Product Features:
- OE Quality and a direct fit application.
- Improved product life by adopting facings with excellent heat and wear resistance.
- Clutch drag prevented by using circumferential grooves in the facings and ensuring sufficient groove depth.
- Improved spline sliding properties by using nickel coated splines.
- Smoother clutch engagement by adopting facings with excellent anti-shudder properties.
- Reduced drive system vibration and noise through the use of a rigid clutch disc structure and reduced deflection of immobile cushion rubbers.
AISIN – Clutch Disc (Part No.I2010104107ASC)
from
$72.31
Engineered to exacting OE Specifications, The AISIN Clutch Disc is designed to deliver optimal drivetrain efficiency. One of Asian’s unique and innovative technologies, the NVR (Noise Vibration Reduction) Clutch proves performance and environmental awareness can go hand in hand. The NVR clutch system has been adopted into the automotive industry as Original Equipment.
Product Features:
See More
Product Features:
- OE Quality and a direct fit application.
- Improved product life by adopting facings with excellent heat and wear resistance.
- Clutch drag prevented by using circumferential grooves in the facings and ensuring sufficient groove depth.
- Improved spline sliding properties by using nickel coated splines.
- Smoother clutch engagement by adopting facings with excellent anti-shudder properties.
- Reduced drive system vibration and noise through the use of a rigid clutch disc structure and reduced deflection of immobile cushion rubbers.
LUK – Clutch Slave Cylinder (Part No.I3010836482LUK)
from
$35.66
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LUK – Clutch Slave Cylinder (Part No.I3010836373LUK)
from
$47.13
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LUK – Clutch Slave Cylinde (Part No.I3010836324LUK)
from
$59.41
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
AISIN – Clutch Slave Cylinder (Part No.I301037809ASC)
from
$48.69
AISIN’s original equipment technology and know-how is applied to design and engineer hydraulics. Each part is manufactured vehicle specific, ensuring product quality and reliability.
Product Features:
See More
Product Features:
- Precision honing of hydraulic cylinders are monitored under OE quality control standards
- Anodizing and Kanizen plating of cylinder bodies strengthens surface, ensuring smooth operation of the piston, and resists corrosion
- Heat resistant and extended life Ethylene Propylene Rubber (EPDM) seals prevent leakage
- Quick response design reacts to driver’s clutch and brake
LUK – Clutch Slave Cylinder (Part No.I3010836448LUK)
from
$56.13
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – Clutch Slave Cylinder (Part No.LSC259)
from
$24.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Slave Cylinder (Part No.LSC112)
from
$29.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Slave Cylinder (Part No.LSC606)
from
$45.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Popular 1995 Toyota Corolla Clutch Systems Categories
1995 Toyota Corolla Clutch Systems
You count on your 1995 Toyota Corolla to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 12 Clutch Systems ranging in price from $24.49 to $386.99, you’re sure to find everything you need for your 1995 Toyota Corolla.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 6 different brands like LuK, National, and ATP. 1995 Toyota Corolla Clutch Systems start as low as $24.49!
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1995 Toyota Corolla below to get started!
FAQs for 1995 Toyota Corolla Clutch Systems
What are the most purchased Clutch Systems for the 1995 Toyota Corolla?
Out of 12 Clutch Systems for the 1995 Toyota Corolla, the most popular in our inventory are:
from
$147.99
This product is not rated
Clutch Kit: 8 1/4" Disc Diameter, 1" Input Shaft Diameter, 21 Tooth Spline
Clutch Sets
