1995 Plymouth Neon Brake Parts

Essential 1995 Plymouth Neon Brake Parts

Carquest Premium – Brake Fluid Level Sensor (Part No.SBA3681)

Brake Fluid Level Sensor

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Parking Brake Switch (Part No.SBA4536)

Parking Brake Switch

from

$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.41132)

Disc Brake Caliper Repair Kit

from

$6.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Brake Hydraulic Hose Clip (Part No.1457-2)

Brake Hydraulic Hose Clip

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and Exact fitment
  • A necessary safety item for protecting the brake lines from harm
  • Restores brakes to like-new performance
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-73161)

Vacuum Brake Booster: Without Master Cylinder

from

$141.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K1687)

Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$140.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4305S)

Semi Loaded Disc Brake Caliper

from

$63.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+ (Part No.YH145026C)

Coated Brake Rotor: Meets or Exceeds OE Specs, Features RotorShield+

from

$72.99
Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:
  • corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
  • long-lasting performance.
  • Manufactured to exacting quality and dimensional specifications for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • OE configuration to dissipate heat, increasing pad life
  • Proper harmonic design helps to reduce brake noise
  • Non-directional finish for decreased break-in time and reduced brake noise
  • Brand may vary by location
See More

Carquest Premium – Brake Light Switch Connector (Part No.PTC2982)

Brake Light Switch Connector

from

$76.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.1456-2)

Drum Brake Hardware Combi-Kit

from

$1.99
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:
  • Manufactured to restrain high tolerances with quality materials
  • Increases the Life Span and Improves the Performance of the Drum Brakes
  • Coated to eliminate heat and corrosion deterioration
  • Restores brakes to like-new performance
  • This part matches Original Equipment (OE) quality specifications
See More

Carquest Wearever – Drum Brake Hardware Kit (Part No.7206)

Drum Brake Hardware Kit

from

$17.79
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Carquest Wearever – Disc Brake Axle Kit (Part No.H5702)

Disc Brake Axle Kit

from

$14.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
  • Direct replacement for a proper fit
  • Restores brakes to like-new performance
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD641)

Semi-Metallic Brake Pads - (4-Pad Set)

from

$44.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37787)

WHEEL CYLINDER

from

$20.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145023)

Disc Brake Rotor Meets or Exceeds OE Design

from

$59.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620118)

Brake Hose Assembly: Copper Washers Included

from

$37.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Professional Platinum – Brake Pads With Hardware, Semi-Metallic, Better Performance, Longer Life, Quiet (Part No.PMD730AH)

Brake Pads With Hardware, Semi-Metallic, Better Performance, Longer Life, Quiet

from

$62.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Powder-coated backing plate prevents corrosion
See More

Wearever – Master Cylinder (Part No.10-2826)

Master Cylinder

from

$60.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2632)

Drum Brake Self-Adjuster Repair Kit

from

$23.99
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span and maximizes performance of the Drum Brakes
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Carquest Wearever – Parking Brake Shoes (Part No.S643)

Parking Brake Shoes

from

$28.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4305)

Semi Loaded Disc Brake Caliper

from

$50.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style, zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. 100% new, OE design phenolic pistons are precision manufactured from advanced polymers that provide improved resistance to heat transfer and environmental contaminants. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5066)

Disc Brake Caliper Guide Pin Kit

from

$6.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2298)

Multi-Purpose Wire Connector with Leads

from

$37.99
ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Wearever – Drum Brake C Washer (Part No.1175-2)

Drum Brake C Washer

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to restrain high tolerances with quality materials
See More

Carquest – A/C Compressor Clutch Relay Connector (Part No.PT177)

A/C Compressor Clutch Relay Connector

from

$31.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
  • Featuring industrial grade materials for robust performance
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.H5593)

Disc Brake Hardware Kit

from

$9.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
See More

1995 Plymouth Neon Brake Parts

You count on your 1995 Plymouth Neon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 64 Brake Parts ranging in price from $0.33 to $146.99, you’re sure to find everything you need for your 1995 Plymouth Neon.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 13 different brands like Carquest, Cardone, and Carquest Premium. 1995 Plymouth Neon Brake Parts start as low as $0.33!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,245 extensive product reviews on 1995 Plymouth Neon Brake Parts. Some of the top-rated Brake Parts products we carry are Semi-Metallic Brake Pads – (4-Pad Set) with 3.9 stars and Drum Brake Self-Adjuster Repair Kit with 4.3 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1995 Plymouth Neon below to get started!

Top-Rated Brake Parts Brands For Your 1995 Plymouth Neon

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Plymouth Neon running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.

Popular Akebono Brake Parts

You’ll find popular Akebono brand products across Brake Pads and Shoes. All are waiting to get your 1995 Plymouth Neon back on the road. Some of the top-rated Akebono products in these categories are:
Pro-ACT Ultra-Premium OE Ceramic Brake Pads
from $80.19
(1)
Pro-ACT Ultra-Premium OE Ceramic Brake Pads
Front Brake Pads and Shoes

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1995 Plymouth Neon, and some of our most reviewed Carquest Wearever parts include:
Parking Brake Shoes
from $28.99
(75)
Parking Brake Shoes
Parking Brake Pads and Shoes
Brake Hydraulic Hose Clip
from $2.49
(55)
Brake Hydraulic Hose Clip
Brake Hydraulic Hose Clips
Disc Brake Caliper Guide Pin Kit
from $6.49
(53)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins

FAQs for 1995 Plymouth Neon Brake Parts

What are the most purchased Brake Parts for the 1995 Plymouth Neon?

Out of 64 Brake Parts for the 1995 Plymouth Neon, the most popular in our inventory are:
Multi Purpose Relay
from $18.79
This product is not rated
Multi Purpose Relay
ABS Modulator Relays
Brake Pads: Reliable and Dependable Stopping
from $27.99
(37)
Brake Pads: Reliable and Dependable Stopping
Rear Brake Pads and Shoes
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

What are the top-rated 1995 Plymouth Neon Brake Parts?

Top-rated Brake Parts for your 1995 Plymouth Neon based on customer reviews/ratings are:
Semi-Metallic Brake Pads - (4-Pad Set)
from $33.99
(43)
Semi-Metallic Brake Pads – (4-Pad Set)
“It was easy to install the brake pads”
Drum Brake Self-Adjuster Repair Kit
from $17.79
(35)
Drum Brake Self-Adjuster Repair Kit
“Advanced is my go to local shop, typically a little cheaper then AZ………….”
Brake Shoes
from $29.99
(22)
Brake Shoes
“good”