1995 Mercedes-Benz C220 Brake Parts
Find Your Specific 1995 Mercedes-Benz C220 Brake Parts
Below you will find various in-demand Mercedes-Benz Brake Parts, components and accessories for your 1995 C220. Advance Auto Parts has popular C220 parts like Brake Hoses, Brake Calipers, Brake Rotors and Drums and more. You’ll also find aftermarket and OEM Brake Parts for other C220 model years including
1994
1996 and more. Select a category of 1995 Mercedes-Benz C220 Brake Parts below and start saving instantly.
Popular 1995 Mercedes-Benz C220 Brake Parts Categories
Essential Brake Parts for 1995 Mercedes-Benz C220s
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2661)
from
$90.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040949158ATE)
from
$326.07
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.
Product Features:
See More
Product Features:
- OE quality direct fit application.
- Friction Ready
- Corrosion inhibiting protection
- Ensures long life and maximum performance
- Natural exterior finish
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1875)
from
$59.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1175)
from
$72.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1086)
from
$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.
Product Features:
See More
Product Features:
- Triggers a warning light on the dashboard
- Should be replaced each time the brake pad is replaced
- Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3238)
from
$8.29
The braking system of some vehicle applications provide an indication when the brake pad condition is low and in need of service. This sensor provides an input when the pad thickness becomes low.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK03)
from
$4.89
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.
Product Features:
See More
Product Features:
- PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
- Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
- All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
- Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
- As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
Carquest Wearever – Parking Brake Shoes (Part No.S816)
from
$29.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Pagid – Premium Copper Free Brake Pads (Part No.N1010336426PAG)
from
$36.90
The strategic concept of HELLA PAGID is so successful because it meets the expectations of customers and drivers at many different levels. As you know: Our products comply with the OE quality standards and are subjected to the highest of standards when it comes to safety, quality and future proofness. This is no doubt important, but it is not all. Our goal is to always be one step ahead of the market. This is achieved by engaging in continuous dialog with the automotive industry. This allows us to incorporate consumer preferences and the experience of the industry in terms of braking performance, wear characteristics and comfort directly into the ongoing development of our name-brand products. PAGIDS exceptional ability to match high expectations with reality is achieved with products that are in every way equal to the great challenges of modern traffic conditions. This is due to the fact that PAGIDS research and development is grounded in Germany and the Centers for Excellence production plants (Germany, France, England, etc.) operate in accordance with the exceptional engineering specifications laid down in Germany.
Product Features:
See More
Product Features:
- Copper Free Formulation
- A powder coat finish gives a clean look and protects it from corrosion
- Specifically developed and calibrated for each vehicle application
- The under-layer provides excellent shear strength and thermal barrier resistance
- Disc cracking resistance and noise prevention
- The backing plates for brake pads meet the most demanding requirements PAGID BRAKE PAD BROCHURE
Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD426)
from
$27.49
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
World Brake Resources – Ceramic Brake Pads (Part No.N1010415133WBR)
from
$45.02
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.
Product Features:
See More
Product Features:
- Original Equipment Performance
- Solid Pedal Feel With Smooth Braking Performance
- Ultra-Quiet Ceramic Formulation
- Low Dust – Long Life
- Advanced Material Platform Specific Shims
- Scorched for Easy Break In
- Positive Mold Construction
- All WBR Pads are 100% Shimmed
Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD645)
from
$51.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000939495ZIC)
from
$53.43
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100018102ZIM)
from
$40.54
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1824)
from
$76.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1825)
from
$76.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
A1 Cardone – Friction Choice Remanufactured Brake Caliper (Part No.N1040271050CAR)
from
$122.29
Remanufactured Caliper – Manufacturer recommends replacing calipers in pairs. CARDONE brake calipers are remanufactured to match the exact look and function of the original equipment unit. Cardone calipers come ‘friction ready’ allowing you to select your favorite brand of brake pad. Cardone completely disassembles every worn part, also known as a core, and thoroughly clean and inspect every component. Through reverse engineering, Cardone engineers pinpoint original equipment design weaknesses through examining common wear areas and incorporate fixes into our renewal process as needed to produce a highly reliable caliper.
Product Features:
See More
Product Features:
- OE Quality -Direct fit application
- 100% O.E.-specific rubber seals ensure like-new performance.
- 100% pressure testing guarantees proper braking function on the vehicle.
- Copper washers are included for a perfect seal.
- Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
- Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- Plastic cap plug in brake port line protects threads before installation.
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2058)
from
$55.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Corteco – Brake Hose (Part No.N7000293380CFW)
from
$20.32
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- High durability
- Low volume expansion
- 100% high pressure tested and certified quality
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA620060)
from
$33.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable & long-lasting repair.
Product Features:
See More
Product Features:
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
FTE – FTE Brake Hose (Part No.N7000293380FTE)
from
$31.54
FTE automotive has decades of experience in the development and production of brake hoses for OEMs and the spare parts market. FTE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)
Product Features:
See More
Product Features:
- Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
- Very high ozone resistance, temperature change resistance and so a long service life
- Low water permeation and so extended service life of the brake fluid
- Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38514)
from
$18.79
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620061)
from
$27.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly (Part No.BHA620059)
from
$27.49
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Upgrade your 1995 Mercedes-Benz C220 with Top-Quality Brake Parts
When it comes to maintaining or upgrading your 1995 Mercedes-Benz C220, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Brake Parts are key to keeping your C220 functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Brake Parts for the 1995 Mercedes-Benz C220, designed to meet your needs without breaking the bank.
From
Brake Hose
replacements to
Brake Calipers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1995 Mercedes-Benz C220 at great prices.
Our Brake Parts inventory for this model
ranges from just $2.39 to $326.07, with
an average price of $65.79.
Our 21 Brake Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1995 Mercedes-Benz C220 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Mercedes-Benz C220, we stock popular OEM and aftermarket Brake Parts from top names
like Carquest Carquest Premium, and more.
Carquest Brake Parts
start at just $4.29 and boast an impressive 4 stars average rating from customers.
With 9 customer reviews and counting, our 1995 Mercedes-Benz C220 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1995 Mercedes-Benz C220 is always ready to roll. We’re committed to providing you with everything you need to keep your C220 in top shape, all in one place.
Start shopping confidently below for your 1995 Mercedes-Benz C220!
Best-Selling Brake Hoses for 1995 Mercedes-Benz C220s
Enhance the driving experience in your Mercedes-Benz with 2 quality Brake Hose components, starting at $18.79.
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38514)
from
$18.79
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly (Part No.BHA620059)
from
$27.49
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Most Popular 1995 Mercedes-Benz C220 Brake Calipers
Customize your Mercedes-Benz with 5 Brake Calipers products
like Front Brake Calipers and
Rear Brake Calipers, all
priced under $326.07.
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1174)
from
$72.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1175)
from
$72.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
ATE Premium One – Original Brake Caliper, Friction Ready (Part No.N1040949159ATE)
from
$326.07
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.
Product Features:
See More
Product Features:
- OE quality direct fit application.
- Friction Ready
- Corrosion inhibiting protection
- Ensures long life and maximum performance
- Natural exterior finish
ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040949158ATE)
from
$326.07
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.
Product Features:
See More
Product Features:
- OE quality direct fit application.
- Friction Ready
- Corrosion inhibiting protection
- Ensures long life and maximum performance
- Natural exterior finish
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2058)
from
$55.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Top Picks for 1995 Mercedes-Benz C220 Brake Rotors and Drums
Upgrade Mercedes-Benz C220s with top-quality Brake Rotors and Drums parts, including 2 OEM and aftermarket selections for your 1995 model.
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000939495ZIC)
from
$53.43
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100018102ZIM)
from
$40.54
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
In-Demand Brake Pads and Shoes for 1995 Mercedes-Benz C220s
Select from 9 premium Brake Pads and Shoes parts for your 1995 Mercedes-Benz C220, with prices ranging from $2.39 to $68.30.
Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD645)
from
$51.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1086)
from
$16.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.
Product Features:
See More
Product Features:
- Triggers a warning light on the dashboard
- Should be replaced each time the brake pad is replaced
- Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD426)
from
$27.49
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
ATE – Brake Pad Set (Part No.N1010944890ATE)
from
$68.30
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking
Product Features:
See More
Product Features:
- OE engineered brake system technology assures optimum fit and performance
- Advanced friction vehicle specific formulations
- Reduced dusting and extend pad life
- Application matched premium quality friction grade
- Underlayer design helps reduce noise, vibration and harshness
- Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
World Brake Resources – Ceramic Brake Pads (Part No.N1010415133WBR)
from
$45.02
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.
Product Features:
See More
Product Features:
- Original Equipment Performance
- Solid Pedal Feel With Smooth Braking Performance
- Ultra-Quiet Ceramic Formulation
- Low Dust – Long Life
- Advanced Material Platform Specific Shims
- Scorched for Easy Break In
- Positive Mold Construction
- All WBR Pads are 100% Shimmed
Pagid – Premium Copper Free Brake Pads (Part No.N1010336426PAG)
from
$36.90
The strategic concept of HELLA PAGID is so successful because it meets the expectations of customers and drivers at many different levels. As you know: Our products comply with the OE quality standards and are subjected to the highest of standards when it comes to safety, quality and future proofness. This is no doubt important, but it is not all. Our goal is to always be one step ahead of the market. This is achieved by engaging in continuous dialog with the automotive industry. This allows us to incorporate consumer preferences and the experience of the industry in terms of braking performance, wear characteristics and comfort directly into the ongoing development of our name-brand products. PAGIDS exceptional ability to match high expectations with reality is achieved with products that are in every way equal to the great challenges of modern traffic conditions. This is due to the fact that PAGIDS research and development is grounded in Germany and the Centers for Excellence production plants (Germany, France, England, etc.) operate in accordance with the exceptional engineering specifications laid down in Germany.
Product Features:
See More
Product Features:
- Copper Free Formulation
- A powder coat finish gives a clean look and protects it from corrosion
- Specifically developed and calibrated for each vehicle application
- The under-layer provides excellent shear strength and thermal barrier resistance
- Disc cracking resistance and noise prevention
- The backing plates for brake pads meet the most demanding requirements PAGID BRAKE PAD BROCHURE
Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3238)
from
$8.29
The braking system of some vehicle applications provide an indication when the brake pad condition is low and in need of service. This sensor provides an input when the pad thickness becomes low.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK03)
from
$4.89
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.
Product Features:
See More
Product Features:
- PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
- Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
- All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
- Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
- As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
Bowa – Brake Pad Wear Sensor (Part No.N103026105BOW)
from
$2.39
Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.
Product Features:
See More
Product Features:
- Exact Replacement with OE Fittings and Connectors
- Highly Durable and Resistant to Temperatures
- Supplied with OE style electrical connectors
- Bowa is an OE supplier to Brake and Vehicle Manufacturers
Most Sold 1995 Mercedes-Benz C220 Brake Kits
Explore our best-selling Mercedes-Benz parts for the 1995 C220 among 1 OEM and aftermarket options starting from $4.29.
Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Top-Rated Brake Parts Brands For Your 1995 Mercedes-Benz C220
Shop for the best-rated brands offering Brake Parts and other products for your 1995 Mercedes-Benz C220s. Below you’ll find some of our best rated Brake Parts from Carquest and Carquest Premium, and more. Brake Parts from these brands that fit a 1995 C220 start at just $4.29 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest 1995 Mercedes-Benz C220 Brake Parts
When it comes to maintaining or upgrading your 1995 Mercedes-Benz C220, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1995 Mercedes-Benz C220. With over 5 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.29, with an average price of just $19.47. Plus, with over 6 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 1995 Mercedes-Benz C220 Brake Parts
Carquest Premium auto parts is one of the highest quality Brake Part brands in the market. Any 1995 Mercedes-Benz C220 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1995 C220, Advance Auto Parts carries a full inventory of 6 Carquest Premium Brake Parts. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Brake Parts range from $8.29 to $72.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.
FAQs for 1995 Mercedes-Benz C220 Brake Parts
Which Brake Parts are best-sellers for 1995 Mercedes-Benz C220s?
Out of 21 Brake Parts that fit 1995 Mercedes-Benz C220s, the following parts are the top sellers:
- Brake Pads: Semi-metallic, Long Life and Quiet (22973606) – $27.49
- Disc Brake Hardware Kit (10168315) – $4.29
- Semi Loaded Disc Brake Caliper (18620231) – $72.99
What’s the price range for 1995 Mercedes-Benz C220 Brake Parts?
Brake Part prices for the 1995 Mercedes-Benz C220 start at $2.39 and go up to $326.07 for the most premium parts.
What’s the average price of a Brake Part for a 1995 Mercedes-Benz C220?
The average price for Brake Parts for the 1995 Mercedes-Benz C220 is $65.79. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Brake Parts for other Mercedes-Benz C220 model years?
What are the cheapest Brake Parts for my 1995 Mercedes-Benz C220?
The cheapest 1995 Mercedes-Benz C220 Brake Parts we carry in stock are:
- Brake Pad Wear Sensor (10768356) – $2.39
- Disc Brake Hardware Kit (10168315) – $4.29
- Disc Brake Pad Electronic Wear Sensor (10857885) – $4.89
- Disc Brake Pad Wear Sensor (12573859) – $8.29
- Brake Pad Wear Sensor (18023628) – $16.79
What are the top-rated Brake Parts that fit the 1995 Mercedes-Benz C220?
Out of 9 reviews by customers, our 1995 Mercedes-Benz C220 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1995 Mercedes-Benz C220 and their top-rated products:
- Brake Pads and Shoes
- Brake Pads: Semi-metallic, Long Life and Quiet (22973467) – $51.99
- Brake Pad Wear Sensor (18023628) – $16.79
- Brake Hoses
- Brake Pads: Semi-metallic, Long Life and Quiet (22973467) – $51.99
- Brake Pad Wear Sensor (18023628) – $16.79
What types of Brake Parts do you sell for my 1995 Mercedes-Benz C220?
As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1995 Mercedes-Benz C220:
Can I get help with 1995 Mercedes-Benz C220 Brake Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Brake Parts and more.
What is your return policy for Mercedes-Benz C220 Brake Parts?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz C220 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
