1995 Mazda Miata Transmission Parts

Below you will find various in-demand Mazda Transmission Parts, components and accessories for your 1995 Miata. Advance Auto Parts has popular Miata parts like Automatic Transmission Kits, Automatic Transmission Pan and Gaskets, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Miata model years including 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1995 Mazda Miata Transmission Parts below and start saving instantly.

Popular 1995 Mazda Miata Transmission Parts Categories

OE Transmission Coolers

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Transmission Master Repair Kits

Transmission Oil Pan Gaskets

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Manual Transmission Bearing and Seal Overhaul Kits

Automatic and Manual Transmission Shift Boots

Essential Transmission Parts for 1995 Mazda Miatas

from

$7.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$19.49

Automatic Transmission Seal

from

$6.99

Product Features:

Brand may vary by location

from

$324.99

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Include steels, frictions, gaskets, and filter
Includes Band and Modulator (if applicable)

from

$8.46

Automatic Transmission Pan Gasket

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

from

$15.41

Automatic Transmission Pan Gasket

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$6.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$7.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$9.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$8.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$26.19

Output Shaft Seal

Upgrade your 1995 Mazda Miata with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1995 Mazda Miata, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Transmission Parts are key to keeping your Miata functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Transmission Parts for the 1995 Mazda Miata, designed to meet your needs without breaking the bank. From Automatic Transmission Kit replacements to Automatic Transmission Pan and Gaskets upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1995 Mazda Miata at great prices. Our Transmission Parts inventory for this model ranges from just $6.99 to $324.99, with an average price of $61.00. Our 24 Transmission Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1995 Mazda Miata without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Mazda Miata, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex Imperial, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. With 220 customer reviews and counting, our 1995 Mazda Miata Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Mazda Miata is always ready to roll. We’re committed to providing you with everything you need to keep your Miata in top shape, all in one place. Start shopping confidently below for your 1995 Mazda Miata!

Best-Selling Automatic Transmission Kits for 1995 Mazda Miatas

Enhance the driving experience in your Mazda with 1 quality Automatic Transmission Kit components, starting at $324.99.

show more show less

from

$324.99

Include steels, frictions, gaskets, and filter
Includes Band and Modulator (if applicable)

Most Popular 1995 Mazda Miata Automatic Transmission Pan and Gaskets

Customize your Mazda with 9 Automatic Transmission Pan and Gaskets products like Transmission Pan Gaskets and Transmission Oil Pan Gaskets, all priced under $32.99.

show more show less

from

$11.49

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$7.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$28.49

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

from

$8.46

Automatic Transmission Pan Gasket

Top Picks for 1995 Mazda Miata Transmission Cooler and Parts

Upgrade Mazda Miatas with top-quality Transmission Cooler and Parts parts, including 9 OEM and aftermarket selections for your 1995 model.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

In-Demand Transmission Seals for 1995 Mazda Miatas

Select from 3 premium Transmission Seals parts for your 1995 Mazda Miata, with prices ranging from $6.99 to $273.99.

show more show less

from

$26.19

Output Shaft Seal

from

$6.99

Product Features:

Brand may vary by location

from

$273.99

ManTransBrg-SealKit

Most Sold 1995 Mazda Miata Transmission Bearings

Explore our best-selling Mazda parts for the 1995 Miata among 1 OEM and aftermarket options starting from $44.49.

show more show less

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

Top-Rated Transmission Parts Brands For Your 1995 Mazda Miata

Shop for the best-rated brands offering Transmission Parts and other products for your 1995 Mazda Miatas. Below you’ll find some of our best rated Transmission Parts from Permatex and Imperial, and more. Transmission Parts from these brands that fit a 1995 Miata start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1995 Mazda Miata Transmission Parts

When it comes to maintaining or upgrading your 1995 Mazda Miata, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 1995 Mazda Miata. With over 7 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $18.48. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 1995 Mazda Miata Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1995 Mazda Miata owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1995 Miata, Advance Auto Parts carries a full inventory of 9 Imperial Transmission Parts. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 114 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

FAQs for 1995 Mazda Miata Transmission Parts

Which Transmission Parts are best-sellers for 1995 Mazda Miatas?

Out of 24 Transmission Parts that fit 1995 Mazda Miatas, the following parts are the top sellers:

High Performance Transmission Oil Cooler (15230020) – $85.99
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (20230013) – $80.99
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (12079746) – $16.99

What’s the price range for 1995 Mazda Miata Transmission Parts?

Transmission Part prices for the 1995 Mazda Miata start at $6.99 and go up to $324.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1995 Mazda Miata?

The average price for Transmission Parts for the 1995 Mazda Miata is $61.00. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Mazda Miata model years?

Yes, we currently carry Transmission Parts for 14 model years of Mazda Miatas between 1990 and 2005. Transmission Parts are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1997, and 1996.

What are the cheapest Transmission Parts for my 1995 Mazda Miata?

The cheapest 1995 Mazda Miata Transmission Parts we carry in stock are:

Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
Oil Seal (10659477) – $6.99
Transmission Oil Pan Gasket (5723744) – $7.79
Automatic Transmission Pan Gasket (10786954) – $8.46
Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49

What are the top-rated Transmission Parts that fit the 1995 Mazda Miata?

Out of 220 reviews by customers, our 1995 Mazda Miata Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1995 Mazda Miata and their top-rated products:

Transmission Cooler and Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (20230023) – $59.99
Automatic Transmission Pan and Gaskets
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (20230023) – $59.99

What types of Transmission Parts do you sell for my 1995 Mazda Miata?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 1995 Mazda Miata:

Can I get help with 1995 Mazda Miata Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Transmission Parts and more.

What is your return policy for Mazda Miata Transmission Parts?

Advance Auto Parts keeps returns simple. For new Mazda Miata Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Mazda Miata Transmission Parts

Driveworks – Oil Seal (Part No.S-223830)

Koyo – Automatic Transmission Seal (Part No.J507048821KOY)

Driveworks – Oil Seal (Part No.S-2025)

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-45)

Ishino – Automatic Transmission Pan Gasket (Part No.J504031695ISH)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Mark Automotive – Automatic Transmission Pan Gasket (Part No.J504024645MAM)

National – Bearings (Part No.306)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18644)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18646)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

National – Multi Purpose Seal (Part No.710319)

Corteco – Output Shaft Seal (Part No.J1157246008CFW)

Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-45)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18644)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Ishino – Automatic Transmission Pan Gasket (Part No.J504031695ISH)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Corteco – Output Shaft Seal (Part No.J1157246008CFW)

Driveworks – Oil Seal (Part No.S-2025)

USA Standard Gear – ManTransBrg-SealKit (Part No.72580)

National – Bearings (Part No.306)