from

$4.49

Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
Helps deliver a quieter, more efficient braking system

from

$556.99

POWER BRAKE BOOSTER

from

$168.99

Wearever power brake boosters are built to meet or exceed original equipment (OE) performance standards for fit, form and function. Every brake booster is completely disassembled, cleaned, inspected, and remanufactured with OE-quality components. We also use reverse engineering to gain insight into why the original unit failed, often resulting in an improved product. All Wearever power brake boosters are 100 percent tested to ensure proper fit and function.

Product Features:

100 percent O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
New mounting nuts and washers ensure proper, hassle-free installation.
All units are 100 percent tested to ensure reliable performance.
Guaranteed fit and function.
Meets or exceeds O.E. performance.

from

$123.99

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to prevent warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$89.99

Carquest Professional coated rotors with high carbon content are built to meet or exceed original equipment specifications delivering superior stopping power. Rotors built with a high carbon content provide superior resistance to pedal pulsation and noise. The high carbon content helps these Carquest Professional rotors dissipate heat faster for better performance and longer-lasting brakes. Carquest Professional coated rotors also feature a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor.

Product Features:

High carbon content dissipates heat faster for better performance and longer-life
Superior resistance to pedal pulsation and noise
Engineered to withstand 120 hours of salt spray testing
Features RotorShield+ coating to maintain a like-new appearance
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Dampened iron helps to reduce brake noise

from

$32.99

This automotive brake hydraulic hose was precision engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles.
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$49.99

This automotive brake hydraulic hose was precision engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles.
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$38.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$82.99

Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes. Carquest Brakes also offers technical support at 1-833-BRAKE HQ (833-272-5347) for help with product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Powder-coated backing plate prevents corrosion

from

$69.99

Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Powder-coated backing plate prevents corrosion

from

$10.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$18.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$11.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels
Helps deliver a quieter, more efficient braking system

from

$79.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$244.99

Disc Brake Caliper failures are not as common compared to brake pads replacements, but undoubtedly normal/heavy usage over time will cause wear and eventually failure. Failures may include brake fluid leakages or simply lockage of your brake pads – both are major safety concerns. HL Mando brand new OE brake calipers are same brake calipers as the original ones found on your vehicle. HL Mando calipers come factory coated as specified by Hyundai and Kia, which is especially important in the snowy-wet regions of the world. Don’t settle for just any value line brake caliper, replace proudly with HL Mando – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$85.99

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
Brackets included where required for complete system restoration
OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
Stainless steel pad abutment hardware included when applicable

from

$61.99

Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels. Designed with the European car owner in mind, Brembo’s Low-Met Brake Pads are formulated for superior braking performance in all driving conditions. Brembo’s Low-Met formulations are comparable to the OE with all Low-Met pads receiving an ECE-R90 approval.

Product Features:

Premium stainless-steel hardware & lubricant included in most applications
Minimize braking distances & provide safe braking experience in all road conditions
OE-equivalent formulations specifically engineered to enhance braking power

from

$102.99

Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels. Designed with the European car owner in mind, Brembo’s Low-Met Brake Pads are formulated for superior braking performance in all driving conditions. Brembo’s Low-Met formulations are comparable to the OE with all Low-Met pads receiving an ECE-R90 approval.

Product Features:

Provides XTRA safety and performance with a sporty touch
OE-equivalent or better quality
XTRA range is fully ECE-R90 Certified

from

$79.99

ADVICS Disc Brake Pads Deliver Consistent Braking Performance Through the Use of Approved Ceramic Friction Materials; Designed and Manufacturing Under Original Equipment Specifications Assuring Superior Quality; Quiet, Smooth and Low Dust Operation Under All Braking Conditions; Brake Shims Meet or Exceed OE Specifications to Achieve Extreme Low Noise and Reduce Vibrations; Organic Formula Provides Longer Pad and Rotor Life.

Product Features:

Leading ceramic friction technology produces quiet, safe and reliable braking.
Designed and tested to OEM specifications and feature OEM mirrored slots and chamfers to reduce NVH.
Includes Stainless Steel hardware kits (where applicable).

from

$52.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$95.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$157.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$34.49

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$26.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$6.99

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

1995 Kia Sportage Brake Parts

Carquest Wearever – Disc Brake Hardware Kit (Part No.5461A)

MANDO – POWER BRAKE BOOSTER (Part No.27A1095)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2504)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH321785)

Carquest Professional – Coated Brake Rotor: High Carbon Content for Improved Performance, RotorShield+ (Part No.YH737139HC)

CQ Premium Brake Hoses – Brake Hydraulic Hose (Part No.BHA620603)

CQ Premium Brake Hoses – Brake Hydraulic Hose (Part No.BHA622644)

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Rear (Part No.NAD1157)

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Rear (Part No.PXD2299H)

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet – Rear (Part No.PXD2098H)

Carquest Wearever – Disc Brake Caliper Guide Pin (Part No.14192)

Carquest Wearever – Disc Brake Caliper Guide Pin (Part No.14142)

Carquest Wearever – Disc Brake Caliper Guide Pin (Part No.14153)

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B6403)

MANDO – New OE Disc Brake Caliper, Direct Replacement (Part No.16A5308)

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B6405)

Brembo – Premium Low-Met OE Equivalent Disc Brake Pad Set – Front (Part No.P30056)

Brembo – XTRA Low-Met Disc Brake Pad Set – Front (Part No.P30056X)

AISIN – Ultra-Premium Ceramic Brake Pads (Part No.AD0924)

Wearever – Remanufactured Brake Master Cylinder (Part No.11-2989)

Carquest Wearever – New Brake Master Cylinder: with Reservoir, Exact Fit, 1" Bore (Part No.MCA630012)

Carquest Wearever – New Brake Master Cylinder: with Reservoir, Exact Fit, 1" Bore (Part No.MCA630762)

Carquest Wearever – Wheel Cylinder (Part No.WCA610005)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA610004)

Economy Black – Disc Brake Caliper Repair Kit (Part No.41098)

Carquest Standard – Brake Pads: Ceramic, Reliable and Dependable Stopping – Front (Part No.NAD670)

PowerStop – Autospecialty Brake Shoes (Part No.B706)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5063)

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2100)

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2101)

Economy Black – Disc Brake Caliper Repair Kit (Part No.41098)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH145066)

Brembo – Premium Vented Brake Rotor (Part No.09.8546.10)

CQ Premium Brake Hoses – Brake Hydraulic Hose (Part No.BHA620024)

CQ Premium Brake Hoses – Brake Hydraulic Hose (Part No.BHA381337)