1995 Jeep Wrangler Vehicle Hoods
More 1995 Jeep Wrangler Vehicle Hoods
Find your specific 1995 Jeep Wrangler original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1995 Jeep Wrangler Vehicle Hoods
Rugged Ridge – Hood Vent Insert (Part No.17759.10)
from
$234.99
The new JK Hood Louvers from Rugged Ridge mount to the factory JK hood and are designed to provide more ventilation surface area to assist with reducing heat build-up in the engine compartment. Our hood louvers promote proper airflow through and out of th
Product Features:
See More
Product Features:
- Stainless Steel
- Weather Resistant
- Sold Individually
- Installs Directly Covering Factory Hinge Using Existing Hardware
- Limited 5 Year Warranty
Rugged Ridge – Hood Vent Insert (Part No.17759.11)
from
$268.99
The new JK Hood Louvers from Rugged Ridge mount to the factory JK hood and are designed to provide more ventilation surface area to assist with reducing heat build-up in the engine compartment. Our hood louvers promote proper airflow through and out of th
Product Features:
See More
Product Features:
- Primer
- Paintable
- Black Stainless Hardware
- Increase Air Flow
- Use w/ 17759.xx Hoods
Omix – Nut;Hood Hinge;Batte (Part No.17258.18)
from
$2.49
Nut;Hood Hinge;Batte
StrongArm – Back Glass Lift Support: 22.99" Ext Length, 9.14" Travel, 28 Lbs of Force, 1 Pk (Part No.C6602)
from
$26.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10096)
from
$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Rugged Ridge – Hood Lock Kit (Part No.11252.04)
from
$41.49
This hood lock kit features a special design that virtually disappears into the grille without taking away from the appearance of your Jeep’s front-end. These clever applications install in minutes. An upgraded internal lock cover keeps your Jeep’s hood l
Product Features:
See More
Product Features:
- Hidden Behind Grille
- Keeps Your Jeeps Hood Locked
- Internal Lock Cover
- Easy to Install
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Painted, Black, Steel, Single (Part No.55176731AF)
from
$24.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Hood To Fender Bumper Stop (Part No.12031.02)
from
$6.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Single
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Help – Hood Bumper Rest (Part No.45363)
from
$17.99
This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this hood stop support is designed to match the fit and function of the original support on specified vehicles
- Restores functionality – reliable replacement for an original support that has failed due to collision damage or has cracked from fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
RT Offroad – HOOD HINGE (Part No.RT34100)
Rugged Ridge – Hood Hinge (Part No.11205.02)
from
$70.99
This pair of hood hinges from Rugged Ridge comes in a semi-gloss black powder-coated finish to protect your investment against the elements. Hardware included ensuring a trouble free installation.
Product Features:
See More
Product Features:
- Black
- OE Style
- Direct Fit
- Includes Hardware
- Limited 5 Year Warranty
Omix – Hood Hinge Bolt (Part No.12029.30)
from
$2.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Single
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rampage – Complete Hood Kit, Includes Hood Catches/Hinges/Vent/Footman Loop/Windshield Tie Down, Stainless (Part No.7499)
from
$149.99
Complete hood kit. Complete set for the ultimate look. Includes set of hood hinges, windshield tie down kit, hood vent, footman loop and hood catches (except 7465).
Product Features:
See More
Product Features:
- Complete Set For Ultimate Look
- Includes Set Of Hood Hinges
- Black Powder Coat Over Cast Stainless
- Hinges/Windshield Stops/Footman Loop
Rampage – Complete Hood Kit, Includes Hinges/Hood Stops/Footman Loop, Polished Stainless (Part No.87466)
from
$161.99
Complete hood kit. Complete set for the ultimate look. Includes set of hood hinges, windshield tie down kit, hood vent, footman loop and hood catches (except 7465).
Product Features:
See More
Product Features:
- Complete Set For Ultimate Look
- Includes Set Of Hood Hinges
- Polished Stainless Steel
- Hinges/Windshield Stops/Footman Loop
Dorman – Interior Panel Retai (Part No.O6125962213DOR)
from
$2.46
Interior Panel Retai
Crown Auto Jeep Replacmnt – Black, Plastic, Set Of 2 (Part No.488601)
from
$15.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
KAI – Hood Panel (Part No.CH1230256V)
from
$439.99
New Economy Replacement Hood Panel, One Washer Hole, High Strength Steel
Product Features:
See More
Product Features:
- One Washer Hole, Made Of High Strength Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Crown Auto Jeep Replacmnt – Cowl To Windshield Frame, Mounts With Adhesive Backing, Black Rubber (Part No.55009127)
from
$59.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.55395032AI)
from
$94.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Omix – Screw; Hood Bumper S (Part No.12029.35)
from
$7.29
Screw; Hood Bumper S
Omix – Seal; Hood to Grille (Part No.12302.12)
from
$47.99
Seal; Hood to Grille
Crown Auto Jeep Replacmnt – Hood To Fender Grommet, Black, Rubber (Part No.J4007541)
from
$3.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Rubber Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
Rugged Ridge – Cowl Vent Scoop (Part No.11130.01)
from
$138.99
This cowl vent scoop was designed to increase the efficiency of your heater and air conditioner. Constructed of prime 304 stainless steel that has been polished to a mirror finish. 304 stainless steel is virtually rust proof guaranteeing that these parts
Product Features:
See More
Product Features:
- Stainless Steel
- Increase Efficiency of Heater and A/C
- Can Face Either Direction
- Limited 5 Year Warranty
Rugged Ridge – Molded Air Scoop (Part No.11352.01)
from
$68.99
Increase the efficiency of your heater and air conditioner with this easy to install Hood Scoop. Installation is easy with double sided automotive grade tape. No drilling required.
Product Features:
See More
Product Features:
- Smoked Acrylic
- UV Treated
- Easy to Install
- Limited 5 Year Warranty
Popular 1995 Jeep Wrangler Vehicle Hoods Categories
1995 Jeep Wrangler Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 1995 Jeep Wrangler. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 26 different Vehicle Hoods in our inventory ranging from $2.46 to $163.99. That means you can find the exact parts or products you need to keep that 1995 Jeep Wrangler running smoothly.
Vehicle Hoods are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Jeep Wrangler. Omix, StrongArm, and Crown Auto Jeep Replacmnt are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 1995 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 1995 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 1995 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
Popular StrongArm Vehicle Hoods
We carry StrongArm parts in our stock across Lift Supports categories, plus more. For a 1995 Jeep Wrangler, our most popular StrongArm Vehicle Hoods include:
from
$29.99
(3)
Back Glass Lift Support: 25.47" Ext Length, 10.79" Travel, 52 Lbs of Force, 1 Pk
Lift Supports
FAQs for 1995 Jeep Wrangler Vehicle Hoods
What are the most purchased Vehicle Hoods for the 1995 Jeep Wrangler?
Out of 26 Vehicle Hoods for the 1995 Jeep Wrangler, the most popular in our inventory are:
