1995 Jeep Wrangler Engine Parts

Below you will find various in-demand Jeep Engine Parts, components and accessories for your 1995 Wrangler. Advance Auto Parts has popular Wrangler parts like Engine Mounts, Valve Cover and Cylinder Heads, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1995 Jeep Wrangler Engine Parts below and start saving instantly.

Popular 1995 Jeep Wrangler Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Engine Computers

Crankshaft Pulleys

Rocker Arms

Engine Valve Stem Seals

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Cylinder Head Bolts

Oil Pump Kits

Standard Piston Rings

Freeze Plug – Block Kits

Fuel Pump Flange Gaskets

Timing Chain Guides

Standard Individual Rod Bearings

Fuel Tank Sending Unit Gaskets

Engine Crankshaft Position Sensor Brackets

Engine Rocker Arm Pivots

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Oil Slinger

Engine Oil Pump Pickup Tube O-Rings

Intake Tuning Valves

Engine Oil Pump Sleeve

Essential Engine Parts for 1995 Jeep Wranglers

from

$8.99

The crankshaft position sensor provides a signal to the engine control module (ECM) or ignition control module (ICM) pinpointing the exact location of the crankshaft for spark and fuel injection timing. The electronic control unit (ECU) will also use the signal to identify specific cylinders for misfire detection and cylinder deactivation on some applications. The crankshaft sensor can be found in-line with the crankshaft either mounted to the engine block, or near the flywheel, or the crankshaft damper pulley.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$21.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$143.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to JEEP 07-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2011
Weight approx: 10 Lbs
PART GROUP: 3343, 3344

from

$21.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$149.99

Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:

Full Upper Gasket Set
OE Style
Direct Fit

from

$182.99

CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.

Product Features:

Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
On-car vehicle validation is done to test durability and performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$32.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$1.99

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$41.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$5.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Constructed From Plastic
Axle Oil Slingers Will Help You Guide Your Axle Through The Inner Axle Seal With Ease
Crown Automotive Offers A Wide Selection Of Replacement Part To Meet Your Application Needs
Direct-Fit Replacement

from

$492.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$198.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Each 260 gasket set includes Fel-Pro gaskets (Number 1 brand of gaskets)
Provides the exact gaskets the application requires.
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$8.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$4.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$2.49

from

$2459.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$122.99

The Crankshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$111.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$8.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Designed to meet or exceed OEM performance requirements. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$11.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$1.99

OILPUMPPICKUPTBORING

from

$31.99

Manufactured to fit a specific application
Provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system
It is recommended that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation
Oil pump screen assemblies are manufactured under strict quality guidelines
Utilizes ISO & QS certified manufacturing

from

$17.99

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original part that is missing or cracked due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$69.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$344.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$205.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$100.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

Upgrade your 1995 Jeep Wrangler with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1995 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Engine Parts are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 176 Engine Parts for the 1995 Jeep Wrangler, designed to meet your needs without breaking the bank. From Engine Mount replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1995 Jeep Wrangler at great prices. Our Engine Parts inventory for this model ranges from just $1.49 to $4,309.99, with an average price of $148.08. Our 176 Engine Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1995 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Jeep Wrangler, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Sealed Power, Dorman, and more. FELPRO Engine Parts start at just $3.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $1.49, and at an average 4.3 stars rating. With 2,956 customer reviews and counting, our 1995 Jeep Wrangler Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 1995 Jeep Wrangler!

Best-Selling Engine Mounts for 1995 Jeep Wranglers

Enhance the driving experience in your Jeep with 8 quality Engine Mount components, starting at $18.99.

show more show less

from

$22.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to JEEP 87-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2001
Weight approx: 3 Lbs
PART GROUP: 2572, 2572

from

$21.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to JEEP 84-00;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1984-2000
Weight approx: 2 Lbs

from

$18.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to JEEP 91-95;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-1995
Weight approx: 3 Lbs

from

$79.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$21.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$36.49

Is your Jeep engine moving too much when you rev it up? Are there unusual noises when you accelerate? The rubber in the engine mounts takes a beating from engine torque every time you use the gas pedal. Omix-ADA offers high quality replacement engine mounts.

Product Features:

Left Or Right Side
OE Style
Direct Fit

from

$77.99

Kit Includes Engine Mounts, Transmission Mount, Insulators And Stud

from

$23.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

Most Popular 1995 Jeep Wrangler Valve Cover and Cylinder Heads

Customize your Jeep with 31 Valve Cover and Cylinder Heads products like Engine Valve Lifters, Cylinder Head Gaskets, and Push Rods, all priced under $1,933.99.

show more show less

from

$5.29

from

$1.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$37.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$9.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$36.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$2.49

from

$47.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$22.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

8 Reqd For 4 Cylinder/12 Reqd For 6 Cylinder/16 Reqd For V8
OE Style
Direct Fit

from

$272.99

For over 45 years, Crown Automotive has been providing the Jeep(R) industry with outstanding quality replacement parts. That same quality and experience can now be found in our new line of Jeep(R) accessories and heavy duty components called RT Off Road.

Product Features:

Durable black finish with polished fins and engine script
Includes Valve Cover, Gasket, Oil Cap, Grommets, and Hardware:
Some modification may be required
Replacement Grommet Use Part Number 2946079 (2 Per Cover): for Replacement Cap Part Number 33001016Al

from

$249.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge.

Product Features:

Limited Warranty
Durable red finish with polished fins and engine script
Includes Valve Cover, Gasket, Oil Cap, Grommets, and Hardware;
Some modification may be required
Replacement Grommet Part Number 2946079 (2 Per Cover); Replacement Cap Use Part Number 33001016Al

from

$205.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$1.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$5.29

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Metal
OE Style
Direct Fit

from

$56.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Plastic
OE Style
Direct Fit

from

$5.49

from

$1933.99

The Edelbrock No. 50169 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine. They feature better flowing intake/exhaust ports along with a modern combustion chamber design and back cut and swirl polished valves for improved flow. Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off the shelf accessories. Larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil threaded inserts in the intake manifold bolt holes for added strength as well as a 3/4″ deck throughout the head also promotes stiffness and durability. This cylinder head is machined to accept both distributor or coil pack ignition. To optimize airflow, this cylinder head is designed with a 1991-2006 4.0L intake port location and 1991-98 4.0L exhaust port size. As a result, this cylinder head must be used with a 1991-2006 intake manifold and a 1991-1998 exhaust manifold. Aftermarket exhaust headers can also be used in place of 1991-1998 exhaust manifolds and MUST be used in place of 1999-2006 exhaust manifolds. Most aftermarket exhaust headers are compatible, but please check with the exhaust header manufacture to verify. This head is NOT compatible with 1999-2006 OEM exhaust manifolds.

from

$518.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$492.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$111.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$96.99

Edelbrock part No. 7348 head gasket is intended for 1987-06 Jeep with 4.0L Inline 6. This gasket comes as a set and has a 4.005″ bore size, .042″ compressed thickness and 8.88cc volume.

from

$27.49

Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.

Product Features:

Composite
OE Style
Direct Fit

from

$18.99

Is your Jeep blowing oil smoke? Need to rebuild your engine? Restore lost power and stop annoying the drivers behind you with high quality replacement valves from Omix-ADA.

Product Features:

Standard
OE Style
Direct Fit

from

$12.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$12.29

Has your Jeep lost power? Need to rebuild your engine? Restore lost power and stop annoying the drivers behind you with high quality replacement valves from Omix-ADA.

Product Features:

Standard
OE Style
Direct Fit

Top Picks for 1995 Jeep Wrangler Camshafts

Upgrade Jeep Wranglers with top-quality Camshafts parts, including 3 OEM and aftermarket selections for your 1995 model.

show more show less

from

$24.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$38.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$28.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

In-Demand Engine Gaskets and Seals for 1995 Jeep Wranglers

Select from 21 premium Engine Gaskets and Seals parts for your 1995 Jeep Wrangler, with prices ranging from $1.99 to $181.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$44.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$20.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$21.49

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$56.99

Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:

Rubber
OE Style
Direct Fit

from

$35.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$23.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$42.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$15.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$181.99

Full Upper Gasket Set
OE Style
Direct Fit

from

$128.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$149.99

Full Upper Gasket Set
OE Style
Direct Fit

from

$147.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$44.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$14.99

GASKETS

from

$10.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Exhaust
Sold Individually
OE Style
Direct Fit

from

$8.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$6.49

Has your Jeep lost power? Need to rebuild your engine? Restore lost power and stop annoying the drivers behind you with high quality replacement valves from Omix-ADA.

Product Features:

Intake
Sold Individually
OE Style
Direct Fit
Limited 5 Year Warranty

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Sold 1995 Jeep Wrangler Engine Timing Parts

Explore our best-selling Jeep parts for the 1995 Wrangler among 21 OEM and aftermarket options starting from $6.99.

show more show less

from

$87.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$73.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: S808T Engine Timing Camshaft Sprocket (1 EA), S809 Engine Timing Crankshaft Sprocket (1 EA), 9-5337 Engine Timing Damper (1 EA), C385 Engine Timing Chain (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$32.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$54.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S607 Engine Timing Crankshaft Sprocket (1 EA), S608T Engine Timing Camshaft Sprocket (1 EA), 9-4023 Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$148.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Metal
OE Style
Direct Fit

from

$11.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Rubber
OE Style
Direct Fit

from

$203.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$201.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$167.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Cover And Oil Pan Gasket
OE Style
Direct Fit

from

$125.99

ENGINE TIMING SET

from

$74.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain, Chain Tensioner, Chain Damper

from

$68.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain, Timing Chain Tensioner

from

$68.99

High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$48.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit

from

$21.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$21.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$21.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$18.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$15.99

ENG TIMNG CHAINGUIDE

from

$10.49

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$6.99

Crown Automotive Is The Premiere Manufacturer And Distributor Of Quality Replacement Parts
Hazardous Free Material
Offers OE Fit And Function
Easy To Install

Top-Rated Engine Parts Brands For Your 1995 Jeep Wrangler

Shop for the best-rated brands offering Engine Parts and other products for your 1995 Jeep Wranglers. Below you’ll find some of our best rated Engine Parts from FELPRO, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 1995 Wrangler start at just $1.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1995 Jeep Wrangler Engine Parts

When it comes to maintaining or upgrading your 1995 Jeep Wrangler, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1995 Jeep Wrangler. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $23.32. Plus, with over 50 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $20.99

(4)

Engine Timing Cover Gasket Set

“Gasket was a perfect fit, didn’t have to wiggle it around to get it to fit”

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $44.99

(20)

Engine Valve Cover Gasket Set

“I have used the cork gaskets on my sons Jeep in the past. They last a little while, but in the end, they start leaking. You’re left with no choice but”

Popular Sealed Power 1995 Jeep Wrangler Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 1995 Jeep Wrangler owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 1995 Wrangler, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Sealed Power Engine Parts range from $1.49 to $9.99, plus, with more than 14 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $1.49

(1)

Engine Valve Spring Retainer Keeper

“24 in a box”

from $9.99

(11)

Engine Valve Lifter

“Perfect in every way.”

from $5.29

(2)

Engine Push Rod

“Got 12 of these for my 2000 Jeep Wrangler rebuild. They work well came with a good coating of oil to keep rust off while in storage. Would buy more if”

FAQs for 1995 Jeep Wrangler Engine Parts

Which Engine Parts are best-sellers for 1995 Jeep Wranglers?

Out of 176 Engine Parts that fit 1995 Jeep Wranglers, the following parts are the top sellers:

Engine Valve Lifter (5688728) – $9.99
Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (5991498) – $35.99
Fuel Pump Mounting Gasket (5183804) – $3.99

What’s the price range for 1995 Jeep Wrangler Engine Parts?

Engine Part prices for the 1995 Jeep Wrangler start at $1.49 and go up to $4,309.99 for the most premium parts.

What’s the average price of a Engine Part for a 1995 Jeep Wrangler?

The average price for Engine Parts for the 1995 Jeep Wrangler is $148.08. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Jeep Wrangler model years?

Yes, we currently carry Engine Parts for 36 model years of Jeep Wranglers between 1987 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 1995 Jeep Wrangler?

The cheapest 1995 Jeep Wrangler Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694163) – $1.49
OE Replacement (11906269) – $1.99
Jeep (50074046) – $1.99
Fuel Pump Gasket (10509522) – $1.99
OILPUMPPICKUPTBORING (50074480) – $1.99

What are the top-rated Engine Parts that fit the 1995 Jeep Wrangler?

Out of 2,956 reviews by customers, our 1995 Jeep Wrangler Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1995 Jeep Wrangler and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
- Engine Push Rod (3709345) – $5.29
- PermaTorque Engine Cylinder Head Gasket (15780247) – $37.99
Engine Gaskets and Seals
- Engine Valve Spring Retainer Keeper (19694163) – $1.49
- Engine Push Rod (3709345) – $5.29
- PermaTorque Engine Cylinder Head Gasket (15780247) – $37.99

What types of Engine Parts do you sell for my 1995 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1995 Jeep Wrangler:

Can I get help with 1995 Jeep Wrangler Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Engine Parts and more.

What is your return policy for Jeep Wrangler Engine Parts?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Jeep Wrangler Engine Parts

Carquest Premium – Engine Crankshaft Position Sensor Spacer (Part No.CSA1739)

Sealed Power – Engine Valve Lifter (Part No.HT-2269)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.3343)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40578)

Omix – Upper Engine Gasket Set; 2.5L; 94-02 Jeep Models (Part No.17442.12)

Cardone – Remanufactured Engine Control Computer (Part No.79-7684)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30676 R)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J8120512)

National – Shaft Repair Sleeve (Part No.99128)

Crown Auto Jeep Replacmnt – Dana 35/44, OE Replacement, Single (Part No.5083669AA)

Spartan – Engine Cylinder Head; AMC 4.0/242 91-95 Cyl Head (Part No.2A30)

Sealed Power – Engine Gasket Set (Part No.260-1999)

Crown Auto Jeep Replacmnt – Oem Replacement, Single (Part No.33003860)

Crown Auto Jeep Replacmnt – Non-Baffled, .94 Inch Inner Diameter, Single (Part No.2946079)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Spartan – Engine Long Block; AMC 4.0/242 96-98 Engine (Part No.VA32)

NTK – Engine Crankshaft Position Sensor (Part No.EH0173)

Crown Auto Jeep Replacmnt – 4.2L I6, Aluminum (Part No.J3225201)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5748)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55366298AA)

Crown Auto Jeep Replacmnt – OILPUMPPICKUPTBORING (Part No.4338942)

Sealed Power – Engine Oil Pump Screen (Part No.224-14270)

Dorman – Help – Engine Oil Filler Cap (Part No.80984)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5747)

Crown Auto Jeep Replacmnt – OE Replacement, With Upper And Lower Assembly/ Gasket (Part No.4666153K)

Crown Auto Jeep Replacmnt – 4.0L/ 4.2L Engines, Self Aligning, Steel, Set Of 12 (Part No.3242393K)

Melling – Stock Replacement OE Type Oil Pump (Part No.M-81A)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2572)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2569)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.2920)

Crown Auto Jeep Replacmnt – Black, Steel, With 2 Engine Mounts/ 1 Transmission Mount/ 2 Inculators/ 1 Stud (Part No.52017534K)

Crown Auto Jeep Replacmnt – Cushioned, Black, Steel (Part No.52040267)

Omix – Engine Mount; 2.5L (Part No.17473.03)

Crown Auto Jeep Replacmnt – Black, Steel, With 2 Engine Mounts/ 1 Transmission Mount/ 2 Inculators/ 1 Stud (Part No.52019201K)

Crown Auto Jeep Replacmnt – Cushioned, Black, Steel (Part No.52002625)

Sealed Power – Engine Push Rod (Part No.RP-3275)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-216)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9076 PT-1)

Sealed Power – Engine Valve Lifter (Part No.HT-2011)

Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.530 SD)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9196 PT-3)

Omix – Lifter Hydraulic; 72-96 Jeep CJ/Wrangler YJ (Part No.17418.03)

RT Offroad – Valve Cover Kit, Black, W/ 4.0L Engine (Part No.RT35001)

RT Offroad – Engine Valve Cover: Valve Cover Kit, Red, W/ 4.0L Engine (Part No.RT35002)

Crown Auto Jeep Replacmnt – 4.0L/ 4.2L Engines, Self Aligning, Steel, Set Of 12 (Part No.3242393K)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J8120512)

Omix – Rocker Arm Pivot; 72-06 Jeep CJ/Wrangler YJ/TJ (Part No.17408.10)

Omix – Plastic Valve Cover 2.5L; 83-92 Jeep CJ/Wrangler (Part No.17401.01)

Sealed Power – Engine Valve Spring (Part No.VS-1456)

Edelbrock – Cylinder Head, Jeep Performer, 1991-06 Inline Six 4.0L Complete With Springs, For Flat Tappet Cam (Part No.50169)

Spartan – Engine Cylinder Head; AMC 150 86-97 Cyl Head (Part No.2A27)

Spartan – Engine Cylinder Head; AMC 4.0/242 91-95 Cyl Head (Part No.2A30)

Crown Auto Jeep Replacmnt – 4.0L I6 (Part No.4636982AD)

Edelbrock – Cylinder Head Gasket Set for Jeep (Part No.7348)

Omix – Cylinder Head Gasket; AMC 2.5L; 83-02 Jeep CJ/Wrangler YJ (Part No.17446.03)

Omix – Exhaust Valve; 2.5L/4.0L; 87-98 Jeep Wrangler (Part No.17415.03)

Crown Auto Jeep Replacmnt – Oem Replacement (Part No.53010388)

Omix – Intake Valve; Std 2.5L/4.0L; 87-98 Jeep Wrangler (Part No.17417.03)

Carquest Premium – Multi-Use Connector (Part No.PTA1055)

Sealed Power – Engine Camshaft Bearing Set (Part No.1244M)

National – Shaft Repair Sleeve (Part No.99179)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50522 T)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45117)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40578)

Omix – Oil Pan Gasket; Rubber; 72-06 Jeep CJ/Wrangler (Part No.17439.06)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34308 R)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45458)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 34007 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50022 C-1)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50430 C)

Omix – Upper Engine Gasket Set; 4.0L; 91-99 Cherokee/Grand Cherokee/Wrangler (Part No.17441.09)

Felpro – Engine Gasket Set (Part No.260-1712)

Omix – Upper Engine Gasket Set; 2.5L; 94-02 Jeep Models (Part No.17442.12)

Felpro – Engine Gasket Set (Part No.260-1710)

Crown Auto Jeep Replacmnt – 4.0L/ 4.2L Engines, Silicone Rubber (Part No.53007568)

Edelbrock – GASKETS (Part No.7583)