1995 Honda Accord Air Conditioning Parts

Essential 1995 Honda Accord Air Conditioning Parts

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

A/C Compressor Relay Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56335)

A/C Discharge Line Hose Assembly

from

$77.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Santech – HVAC Pressure Transd (Part No.R21431998373SII)

HVAC Pressure Transd

from

$66.84
HVAC Pressure Transd

Factory Air – System Mounted Binary Pressure Switch (Part No.35993)

System Mounted Binary Pressure Switch

from

$43.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – A/C Liquid Line Hose Assembly without Orifice Tube (Part No.T55929)

A/C Liquid Line Hose Assembly without Orifice Tube

from

$65.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26745)

O-Ring & Gasket A/C System Seal Kit

from

$19.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Koyo Cooling – A/C Condenser (Part No.R1030259482KCS)

A/C Condenser

from

$180.57
Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.

Product Features:
  • Japanese Engineered, OE Equivalent Quality
  • Meet or exceed OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Compatible with R12 and R134a refrigerant.
  • Applicable gaskets and O-rings supplied with each part.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39007)

A/C Block Type O-Ring Expansion Valve

from

$41.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Accessory Power Relay (Part No.RAA1815)

Accessory Power Relay

from

$54.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Filter Drier (Part No.T33574)

A/C Filter Drier

from

$31.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Factory Air – Standard Relay (Part No.36129)

Standard Relay

from

$12.05
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Precision engineered
  • OE style molded connectors
  • Quality contacts ensure proper conductivity
  • Vehicle specific applications
See More

Carquest Premium – A/C Serpentine Evaporator (Part No.T54677)

A/C Serpentine Evaporator

from

$91.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

NTK – ABS Wheel Speed Sensor (Part No.AB0205)

ABS Wheel Speed Sensor

from

$40.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

DENSO – Relay (Part No.567-0052)

Relay

from

$26.99
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.
See More

Santech – A/C Pressure Switch (Part No.R1054259634SII)

A/C Pressure Switch

from

$46.21
A/C Pressure Switch

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56334)

A/C Suction Line Hose Assembly

from

$69.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Santech – A/C Hose (Part No.R1020259604SII)

A/C Hose

from

$42.35
A/C Hose

KAI – Condenser Fan Assembly (Part No.HO3113109)

Condenser Fan Assembly

from

$83.99
New Platinum Pro A/C Condenser Fan Assembly, V6

Product Features:
  • V6 Engines
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C System Seal Kit (Part No.FTT010045)

A/C System Seal Kit

from

$15.99
New Standard Replacement A/C System Seal Kit, MT2560, L3 Engine

Product Features:
  • MT2560, L3 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34246)

Air Conditioning Bypass Pulley

from

$58.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$17.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.6694K)

A/C Compressor and Component Kit

from

$502.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Dorman – 2-Wire Pressure (Part No.85141)

2-Wire Pressure

from

$14.29
This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Valeo – A/C Compressor w/ Clutch, New (Part No.R1000256169VAL)

A/C Compressor w/ Clutch, New

from

$486.68
Valeo manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Guarantees OE quality performance, durability and fitment.
  • A product 100% ‘new’ developed by Valeo
  • Matching quality compressor.
  • Equipped with a new clutch assembly.
  • Design that associates performance, output and reliability.
See More

Carquest Premium – A/C New, with Clutch, with 10SR15C Compressor (Part No.T158335)

A/C New, with Clutch, with 10SR15C Compressor

from

$479.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

DENSO – New Compressor With Clutch (Part No.471-1190)

New Compressor With Clutch

from

$327.99
As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

1995 Honda Accord Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1995 Honda Accord. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 49 different Air Conditioning Parts in our inventory ranging from $0.99 to $465.77. That means you can find the exact parts or products you need to keep that 1995 Honda Accord running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Honda Accord. Factory Air, Carquest Premium, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1995 Honda Accord, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 286 reviews in this category, some of the top rated parts include A/C Condenser Fan Motor with 4.2 stars and A/C Condenser Fan Assembly: Cost Effective And Reliable with 4.0 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1995 Honda Accord rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1995 Honda Accord Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Honda Accord demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Accord the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Factory Air Air Conditioning Parts

We carry Factory Air parts in our stock across HVAC Binary Switches and AC Compressor Cut-Out Relays categories, plus more. For a 1995 Honda Accord, our most popular Factory Air Air Conditioning Parts include:
System Mounted Binary Pressure Switch
from $43.99
(2)
System Mounted Binary Pressure Switch
HVAC Binary Switches
Standard Relay
from $12.05
(3)
Standard Relay
AC Compressor Cut-Out Relays
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Line O-Rings

FAQs for 1995 Honda Accord Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1995 Honda Accord?

Out of 49 Air Conditioning Parts for the 1995 Honda Accord, the most popular in our inventory are:
A/C New; w/ Clutch; w/ 10S20F Compressor
from $267.99
(16)
A/C New; w/ Clutch; w/ 10S20F Compressor
AC Compressor With Clutch
A/C TXV O-Ring Expansion Valve
from $34.49
(9)
A/C TXV O-Ring Expansion Valve
Expansion Valve and Orifice Tubes
5-Wire Style Relay
from $17.99
This product is not rated
5-Wire Style Relay
AC Relay Connectors

What are the top-rated 1995 Honda Accord Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1995 Honda Accord based on customer reviews/ratings are:
A/C Condenser Fan Motor
from $86.25
(9)
A/C Condenser Fan Motor
“THe nwheel puller work well to remove the wheel from the wagen. I was able to return it. Thanks.”
A/C Condenser Fan Assembly: Cost Effective And Reliable
from $70.99
(2)
A/C Condenser Fan Assembly: Cost Effective And Reliable
“It installed easily. The 3 bolts lined up with the holes. The electrical connections plugged right in.”
New Compressor with Clutch
from $309.99
(2)
New Compressor with Clutch
“I purchased this part and I had my mechanic install it. He had no problems with the installation. My car sounds great, my original compressor was sh”