1995 Chrysler Sebring Ignition and Tune-Up Products

Essential 1995 Chrysler Sebring Ignition and Tune-Up Products

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0232)

Ignition Knock (Detonation) Sensor

from

$24.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

Delphi – Knock Sensor (Part No.AS10167)

Knock Sensor

from

$23.29
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Distributor Rotor (Part No.DAA1335)

Distributor Rotor

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

YEC – YEC Distributor Rotor (Part No.F202085844YEC)

YEC Distributor Rotor

from

$17.20
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Suppression
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve
See More

Carquest Premium – Distributor T49600: 100% New, With Cap and Rotor (Part No.T49600)

Distributor T49600: 100% New, With Cap and Rotor

from

$307.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Cardone – Remanufactured Ignition Distributor (Part No.F2000888114CAR)

Remanufactured Ignition Distributor

from

$467.98
Cardone Remanufactured Distributors are built to last using the highest quality OE materials and technologically advanced processes. All distributors are 100% tested to assure that they meet or exceed original equipment specifications. Automated test equipment verifies signal strength, correct polarity of wire harness, air gap and coil performance. Precise machining tolerances prevent oil leaks, poor timing, setting of “check engine light” and premature failure. Gear hardness determined by application so as to not damage or pre-maturely wear out related components. All electronic modules are 100 percent tested to ensure full functionality. Every unit is 100 percent tested to ensure quality and reliability.

Product Features:
  • Automated test equipment verifies signal strength, correct polarity of wire harness, air gap and coil performance
  • Precise machining tolerances prevent oil leaks, poor timing, setting of “check engine light” and premature failure
  • Gear hardness determined by application so as to not damage or pre-maturely wear out related components
  • All electronic modules are 100% tested to ensure full functionality
  • Every unit is 100% tested to ensure quality and reliability
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1841)

Distributor Cap and Rotor Kit

from

$58.99
Distributor Cap and Rotor Kit

Carquest – Distributor Cap (Part No.C457)

Distributor Cap

from

$32.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Each fuel vapor canister is designed and tested to OE specifications for a direct-fit replacement controlling the loss of evaporative emissions from fuel systems to the environment.
  • Every fuel vapor canister includes an integrated check valve with an operating pressure calculated according to your vehicle’s specific needs.
  • Each fuel vapor canister is built for pressurized fuel systems to sustain creep loads.
  • All of our fuel vapor canister come in various sizes for different fuel systems and is manufactured with the highest grade materials ensure precision performance
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4147)

Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit

from

$49.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – Coil on Plug Boot (Part No.58917)

Coil on Plug Boot

from

$11.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Carquest Premium – Ignition Switch (Part No.CSC1097)

Ignition Switch

from

$48.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1294)

Ignition Switch

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5224)

Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition

from

$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
  • Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
  • Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
  • Gasket Seat Type: Ensures a secure and proper fit for optimal performance.
See More

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, LZTR5AIX-13 (Part No.2314)

Iridium IX Spark Plug: Single Iridium Fine Wire, LZTR5AIX-13

from

$10.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
  • Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and are designed to resist fouling, ensuring reliable performance in various driving conditions.
See More

Encore Automotive – Ignition Coil (Part No.IC-D20012)

Ignition Coil

from

$111.99
Encore Automotive Genuine OE Ignition Coil converts a 12-volt current to the high voltage energy needed to create an electric spark required to ignite the air-fuel mixture. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:
  • Genuine OE Part
  • Direct fit and OE performance to ensure reliable voltage at all speeds
  • High quality materials provide durability and protection against corrosion
  • Consistent and effective combustion
See More

WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005399314WSO)

Direct Ignition Coil - (Coil on Plug)

from

$57.22
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:
  • OE-Equivalent and a direct fit application
  • Superior, reliable performance compared to competitive products
  • Lower cost alternative to original equipment
  • No additional time consuming steps needed for installation
  • Factory original equipment connectors
  • Improved coil efficiency reduces the need to generate excessive high voltage
  • Designed to provide durability and performance
  • Noise abatement technology to eliminate audible coil noise
  • Lower primary inductance provides high-speed performance
  • Maximum available voltage under all operating conditions
  • TS 16949 Certification
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7018)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

NGK – NGK Ignition Wire Set (Part No.F1020108641NGK)

NGK Ignition Wire Set

from

$42.10
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6227)

Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set

from

$90.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Victor Reinz – Spark Plug Tube Seal Set (Part No.18-10019-01)

Spark Plug Tube Seal Set

from

$18.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 72948)

Spark Plug Tube Seal Set

from

$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 72120)

Spark Plug Tube Seal Set

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7015)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 2 Wire Set (Part No.671-4266)

Spark Plug Wire Set: Aluminum Steel Core, 2 Wire Set

from

$59.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

NGK – Spark Plug Wire Set (Part No.8910)

Spark Plug Wire Set

from

$66.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1995 Chrysler Sebring Ignition and Tune-Up Products

You count on your 1995 Chrysler Sebring to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 63 Ignition and Tune-Up Products ranging in price from $2.99 to $467.98, you’re sure to find everything you need for your 1995 Chrysler Sebring.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 17 different brands like NGK, Autolite, and DENSO. 1995 Chrysler Sebring Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 4,236 extensive product reviews on 1995 Chrysler Sebring Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.1 stars and G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP with 4.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1995 Chrysler Sebring below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1995 Chrysler Sebring

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1995 Chrysler Sebring running right for years to come. In our inventory you’ll find brands like NGK, Autolite, DENSO, and even more.

Popular Driveworks Ignition and Tune-Up Products

You’ll find popular Driveworks brand products across Ignition Coils and Boots. All are waiting to get your 1995 Chrysler Sebring back on the road. Some of the top-rated Driveworks products in these categories are:
Ignition Coil
from $70.05
(22)
Ignition Coil
Ignition Coils

Top-Rated NGK Ignition and Tune-Up Products


If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1995 Chrysler Sebring, and some of our most reviewed NGK parts include:

FAQs for 1995 Chrysler Sebring Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1995 Chrysler Sebring?

Out of 63 Ignition and Tune-Up Products for the 1995 Chrysler Sebring, the most popular in our inventory are:

What are the top-rated 1995 Chrysler Sebring Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1995 Chrysler Sebring based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $6.99
(184)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“Great product”
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
from $3.99
(105)
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
“Perfect fit! Excellent product.”