1995 Chevrolet Impala Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1995 Impala. Advance Auto Parts has popular Impala parts like Camshafts, Valve Cover and Cylinder Heads, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Impala model years including 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 1995 Chevrolet Impala Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1995 Chevrolet Impala Engine Parts Categories

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Harmonic Balancers

Timing Cover Gasket Sets

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

O-Rings

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Engine Crankshaft Hubs

Timing Chains

Engine Valve Springs

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Camshaft Plugs

Engine Valves

Standard Single Pistons

Engine Oil Pump Bushing

Engine Valve Locks

Engine Rocker Arm Balls

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Engine Oil Deep Sump Kits

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Oil Pump Guide Bushings

Engine Oil Pump Screen Mounting Kit

Essential Engine Parts for 1995 Chevrolet Impalas

from

$95.99

ENGINE TIMING SET

from

$177.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$26.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$37.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$115.99

High Energy Hydraulic lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and pushrod seat is maintained, eliminating excessive oiling at high engine speeds. The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance.In addition, High Energy Lifters have a lightweight check valve disc that allows for quicker response, which results in increased engine speed before valve float. This check valve disc also maintains added control at all engine speeds and loads.COMP Cams High Energy Hydraulic Lifters also contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.

Product Features:

.842″ diameter; 94g weight; 1.99″ seat height
Patented orifice metering valve precisely meters oil to the rocker arms
Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads

from

$506.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

from

$65.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$34.99

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$0.65

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$156.99

New Standard Replacement Engine Oil Pan, [Gasket Not Included] With Oil Level Sensor Hole

Product Features:

Gasket Not Included, With Oil Level Sensor Hole
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$124.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$549.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$82.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$1.99

Made In USA. Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.

Product Features:

Manufactured from high quality nylon for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$19.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made with exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
Piston skirts protected by next-gen DUROSHIELD coating.
TAC ring groove geometry
Weight matched to +/- 2 grams.

from

$230.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. High volume performance upgrade for the M-99HV-S. The 10990 is a big block style oil pump made to fit the small block appl

Product Features:

25% Higher volume anti-cavitation high performance upgrade of the M-99HVS
CNC machined phosphate coated cast iron housing and cover
Cover has extended idler shafts for additional support at high RPM’s
Standard billet steel spur gears
Adjustable pressure relief valve
Includes lower pressure spring; not installed
Includes chrome moly steel intermediate drive shaft with steel guide
Uses 3/4 inch diameter press-fit screen

from

$23.99

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$3.49

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components.

Product Features:

Precision engineered and made from high quality alloys
Provides recommended spring pressure with valve on seat and at maximum lift
Meets unique demands of performance engines
Delivers dependable performance and superior service life
Application-specific design for perfect fit and correct operation

from

$44.99

A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineered for maximum fit and function
Designed for long-life and worry-free performance
Includes additional support mounting bracket for high performance applications
Phosphate coated for rust protection
Includes screen mounting gasket and hex head wrench
Exceeds original equipment specifications

from

$11.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$6.99

Melling always suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Melling offers an oil pump screen mounting kit for the 10552ST and 10555ST series high performance pumps. The oil pump screen mounting kit contains everything needed for a fast, easy and quality screen installation including the tool and hardware needed to complete the installation.

from

$76.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$57.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$110.99

H14 Super Duty alloy material
Best bronze alloy material
Does not have flash tin plating
Extreme fatigue resistance & strength
3/4 Grooved
Silicon particles help polish crankshaft journal (reduces wear during operation)

Upgrade your 1995 Chevrolet Impala with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1995 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 300 Engine Parts for the 1995 Chevrolet Impala, designed to meet your needs without breaking the bank. From Camshaft replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1995 Chevrolet Impala at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $4,310.00, with an average price of $349.51. Our 300 Engine Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1995 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1995 Chevrolet Impala, we stock popular OEM and aftermarket Engine Parts from top names like Melling, Sealed Power, National, and more. Melling Engine Parts start at just $3.29 and boast an impressive 4.3 stars average rating from customers. Sealed Power and National also bring quality to the table, with Engine Parts available starting at $0.43, and at an average 4.3 stars rating. With 457 customer reviews and counting, our 1995 Chevrolet Impala Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1995 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 1995 Chevrolet Impala!

Best-Selling Camshafts for 1995 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 130 quality Camshaft components, starting at $2.99.

show more show less

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$549.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$14.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$41.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$254.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

Product Features:

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
Valve spring upgrade required
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$549.99

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.

Product Features:

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$30.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$1745.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

XFI 230/236 Hydraulic Roller K-Kit for GM LT1/LT4

from

$1733.00

XFI 230/236 Hydraulic Roller K-Kit for GM LT1/LT4

Xtreme 4x4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

from

$1712.00

Xtreme 4×4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

from

$1712.00

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

XFI 230/236 Hydraulic Roller Cam and Lifter Kit for GM LT1/LT4

from

$1214.00

XFI 230/236 Hydraulic Roller Cam and Lifter Kit for GM LT1/LT4

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$1152.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Most Popular 1995 Chevrolet Impala Valve Cover and Cylinder Heads

Customize your Chevrolet with 27 Valve Cover and Cylinder Heads products like Engine Valve Lifters, Cylinder Head Bolt Sets, and Cylinder Head Gaskets, all priced under $474.99.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

from

$85.99

This 7° steel retainer for #26915 or #26918 Valve Springs in Non Gen III Engines is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

Product Features:

7° angle retainers for 1.055″ diameter valve springs, 11/32″ Valve Stems
O.D. – 1.030″, Step 1 – .640″
Precision machined from 4140 chromemoly steel and finished in black oxide
Designed for positive location when combined with COMP Cams high-quality valve springs

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$14.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$107.99

Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.

Product Features:

Chrome plated steel construction
These Caps Fit Over Existing Factory Stock Painted Valve Covers
Fits Over Truck Center-Bolt Valve Covers
Sold as a pair
Fits Truck applications only
Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$37.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Unsurpassed quality you can trust

from

$0.65

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

Product Features:

.842″ diameter; 122g weight; 2.66″ seat height
Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
Decrease friction and increase longevity when directly compared to flat tappet lifters
Accept much more aggressive cam profiles than flat tappet lifters will allow

from

$14.99

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

Reduced Travel OE-Style Hydraulic Roller Lifter Set for '87+ SBC and LT/LS

from

$474.99

Reduced Travel OE-Style Hydraulic Roller Lifter Set for ’87+ SBC and LT/LS

from

$472.99

Product Features:

Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
Specifically designed for GM ZZ6 engines, but will fit all Small Block Chevy applications with center bolt style cylinder heads (Vortec, ZZ4, ZZ5, ZZ6) – polished mounting hardware included
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Offered in four unique finishes to fit your style: natural cast aluminum with machined logo (ready for custom paint), polished, satin black with machined logo, and factory orange with machined logo

from

$421.99

Product Features:

Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
Specifically designed for GM ZZ6 engines, but will fit all Small Block Chevy applications with center bolt style cylinder heads (Vortec, ZZ4, ZZ5, ZZ6) – polished mounting hardware included
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Offered in four unique finishes to fit your style: natural cast aluminum with machined logo (ready for custom paint), polished, satin black with machined logo, and factory orange with machined logo

Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit '87+ Chevrolet Small Block

from

$412.99

Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit ’87+ Chevrolet Small Block

from

$383.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$379.99

16 Springs

from

$267.99

ENGINE ROCKER ARM

Magnum 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$225.99

Magnum 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set

Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12

from

$211.99

Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12

from

$39.99

Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6

from

$29.99

1 Spring

from

$23.99

1 Spring

Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod

from

$17.99

Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod

Top Picks for 1995 Chevrolet Impala Engine Gaskets and Seals

Upgrade Chevrolet Impalas with top-quality Engine Gaskets and Seals parts, including 9 OEM and aftermarket selections for your 1995 model.

show more show less

from

$43.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$34.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$21.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$49.99

This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:

Repairs That Leaky Rear Main Sail
Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals

from

$202.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

In-Demand Engine Mounts for 1995 Chevrolet Impalas

Select from 2 premium Engine Mounts parts for your 1995 Chevrolet Impala, with prices ranging from $13.49 to $29.99.

show more show less

from

$13.49

Anchor 2292 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-2005
Weight approx: 3 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2292, 2292

from

$29.99

Product Features:

Can be used for a variety of GM vehicle applications and LS/LT swaps that utilize the common 2292 aftermarket mounts
Heavy duty 11-gauge steel construction is over 50% thicker than common aftermarket mounts
Dowels allow halves to be easily aligned
No need to drill rivets from existing shell
Durable powder coated finish
For use with Hooker BlackHeart Polyurethane Inserts – P/N’s 71221014HKR (Black) or 71221015HKR (Red) – Sold Separately
Sold individually (Consisting of one upper and one lower plate, Two required per vehicle)

Most Sold 1995 Chevrolet Impala Engine Timing Parts

Explore our best-selling Chevrolet parts for the 1995 Impala among 12 OEM and aftermarket options starting from $15.99.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$22.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$19.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$46.99

Single Roller True Roller Chain. Prestressed And Heat-Treated For Increased Durability.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

Magnum/Drag Race 244/244 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$589.99

Magnum/Drag Race 244/244 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$537.99

Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Xtreme Energy 206/212 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$537.99

Xtreme Energy 206/212 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Xtreme Energy 224/230 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$537.99

Xtreme Energy 224/230 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$333.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Billet Steel Sprockets are Heat Treated for Durability. Includes Billet Heat Treated Water Pump Driven Gear. Premium Half Inch Pitch Single Roller Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$79.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 1995 Chevrolet Impala

Shop for the best-rated brands offering Engine Parts and other products for your 1995 Chevrolet Impalas. Below you’ll find some of our best rated Engine Parts from Melling, Sealed Power, and National, and more. Engine Parts from these brands that fit a 1995 Impala start at just $0.43 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Melling 1995 Chevrolet Impala Engine Parts

When it comes to maintaining or upgrading your 1995 Chevrolet Impala, using quality Engine Parts is essential to ensure durability and a perfect fit. Melling ticks all of those boxes. We offer a wide selection of Melling Engine Parts, specifically designed for the 1995 Chevrolet Impala. With over 3 Melling brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.29, with an average price of just $16.76. Plus, with over 19 customer reviews and an average rating of 4.3 stars, you can trust that our Melling Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $3.29

(5)

Stock Replacement Oil Pump Shaft Guide

“This is what I needed. The only one around in New York that I could find…….”

from $24.99

(7)

Stock Replacement Oil Pump Screen

“Would suggest buying the Mellings installation tool to install the pickup”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

Popular Sealed Power 1995 Chevrolet Impala Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 1995 Chevrolet Impala owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 1995 Impala, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Sealed Power Engine Parts range from $0.43 to $8.49, plus, with more than 5 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $2.99

(2)

Engine Push Rod

“1986-1990 GM 4.3L Understand this headline or you’ll need 12 of these beauties. Not always covered in manuals. 48 hours and I had these in hand with f”

from $0.43

(2)

Engine Valve Spring Retainer Keeper

“You guys are always great”

from $8.49

(1)

Engine Connecting Rod Bearing

“great”

FAQs for 1995 Chevrolet Impala Engine Parts

Which Engine Parts are best-sellers for 1995 Chevrolet Impalas?

Out of 300 Engine Parts that fit 1995 Chevrolet Impalas, the following parts are the top sellers:

Engine Valve Lifter (5681081) – $14.49
Engine Cylinder Head Bolt Set (5188652) – $32.99
Engine Valve Lifter (12486346) – $24.99

What’s the price range for 1995 Chevrolet Impala Engine Parts?

Engine Part prices for the 1995 Chevrolet Impala start at $0.43 and go up to $4,310.00 for the most premium parts.

What’s the average price of a Engine Part for a 1995 Chevrolet Impala?

The average price for Engine Parts for the 1995 Chevrolet Impala is $349.51. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Impala model years?

Yes, we currently carry Engine Parts for 50 model years of Chevrolet Impalas between 1958 and 2020. Engine Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Engine Parts for my 1995 Chevrolet Impala?

The cheapest 1995 Chevrolet Impala Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Rocker Arm Ball (19694261) – $0.65
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Sold by each) (16140188) – $1.99
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (3492265) – $2.99
Engine Push Rod (3689670) – $2.99

What are the top-rated Engine Parts that fit the 1995 Chevrolet Impala?

Out of 457 reviews by customers, our 1995 Chevrolet Impala Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1995 Chevrolet Impala and their top-rated products:

Engine Gaskets and Seals
- Multi-Purpose Seal (18443665) – $20.49
- Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (5720575) – $43.99
- TIMING COVER GASKET SET (5991935) – $22.99

What types of Engine Parts do you sell for my 1995 Chevrolet Impala?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1995 Chevrolet Impala:

Can I get help with 1995 Chevrolet Impala Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Impala Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1995 Chevrolet Impala Engine Parts

INA US – ENGINE TIMING SET (Part No.ZC-78300)

PowerBond – Race Performance Harmonic Balancer; 171.5mm Diameter (Part No.PB2221SS)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71198)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40520)

Competition Cams – HYDRAULIC LIFTER SET, SBC/BBC 1 ST (Part No.812-16)

Holley – Valve Covers – Muscle Series – Finned – SBC – Polished (Part No.241-137)

Felpro – Engine Gasket Set (Part No.KS 2629)

Carquest Premium – Engine Oil Level Sensor (Part No.SBA3659)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

KAI – Engine Oil Pan (Part No.SPIGMP11B)

Dorman – Camshaft Phaser (Part No.917-254)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.12-422-8)

National – Redi-Sleeve (Part No.99353)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50504 R-1)

Melling – Stock Replacement Oil Pump Shaft Guide (Part No.M-55024)

Sealed Power – Engine Piston (Part No.WH423DCP 60)

Melling Select Performance – High Performance Cast Iron Standard Billet Gear Racing Oil Pump (Part No.10990)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-77)

Sealed Power – Valve Spring (Part No.VS-739R)

Melling Select Performance – High Performance Replacement Bolt On Oil Pump Screen (Part No.12564)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10099)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Melling Select Performance – Oil Pump Screen Mounting Kit (Part No.M-55085)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10528-00)

Sealed Power – Engine Camshaft Bearing Set (Part No.1923M)

Sealed Power – Main Bearing Set (Part No.140M)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.362657.1)

Sealed Power – Engine Camshaft Bearing Set (Part No.1749M)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam (Part No.12-422-8)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.12-238-2)

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)

Competition Cams – Camshaft, Sbc 288 Xtreme Energy Hyd Roller 1 Ea (Part No.12-433-8)

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M 1)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam K-Kit (Part No.K12-600-8)

Competition Cams – XFI 230/236 Hydraulic Roller K-Kit for GM LT1/LT4 (Part No.K07-467-8)

Competition Cams – Xtreme 4×4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block (Part No.CL12-411-8)

Competition Cams – Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-432-8)

Competition Cams – XFI 230/236 Hydraulic Roller Cam and Lifter Kit for GM LT1/LT4 (Part No.CL07-467-8)

Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-433-8)

Competition Cams – Xtreme Energy 206/212 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-408-8)

Competition Cams – Magnum 244/244 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-460-8)

Competition Cams – Xtreme Energy 242/248 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-443-8)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-422-8)

Competition Cams – Magnum 230/230 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-450-8)

Competition Cams – Xtreme Energy 224/230 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-423-8)

Competition Cams – Xtreme Energy 212/218 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-412-8)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Push Rod (Part No.RP-3262)

Competition Cams – Steel Retainers, 1.055" For Beehive 1 St (Part No.787-16)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Mr. Gasket – Valve Cover (Part No.9847)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9966 PT)

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Competition Cams – LIFTERS, LS SERIES OE STYLE HYD RLR 1 ST (Part No.850-16)

Sealed Power – Engine Exhaust Valve (Part No.V-4345)

Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter Set for ’87+ SBC and LT/LS (Part No.875-16)

Holley – GM Licensed Valve Cover – Muscle Series – SBC – Center Bolt (Part No.241-292)

Holley – GM Licensed Valve Cover – Muscle Series – SBC – Center Bolt – Natural (Part No.241-290)

Competition Cams – Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit ’87+ Chevrolet Small Block (Part No.RPG103)

Spartan – Engine Cylinder Head; Chevrolet 350 96 LT-1 Head (Part No.2CT1)

Competition Cams – 16 Springs (Part No.26915-16)

Competition Cams – ENGINE ROCKER ARM (Part No.1418-16)

Competition Cams – Magnum 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7608-16)

Competition Cams – Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set of 12 (Part No.7940-12)

Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)

Competition Cams – 1 Spring (Part No.26925-1)

Competition Cams – 1 Spring (Part No.26915-1)

Competition Cams – Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.7940-1)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34500 R)

National – Multi-Purpose Seal (Part No.4359V)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50088 R)