1995 Chevrolet C3500HD Differentials

Find your specific 1995 Chevrolet C3500HD original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1995 Chevrolet C3500HD Differentials

from

$318.99

Product Features:

Spider gear kit
Fits Dana Spicer 80, 37 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$5.99

DiffrlPinSupportBolt

from

$11.99

10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:

Ring gear bolt for GM 10.5″ 14 bolt truck
4.56 and up ratio
1/2″ x 18 thread
2.522″ overall length

from

$1119.99

Differential

from

$19.99

Product Features:

Oil baffle
Fits Dana Spicer 80

from

$502.99

Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:

Clutch kit
Fit Dana Spicer 80 Trac Loc positraction

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$1175.00

Differential

from

$69.99

Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:

Cross pin shaft
Fits Dana Spicer 70 and 80

from

$7.99

Differential Cover B

from

$60.23

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:

Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$198.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

High strength steel
Dual heat treating process

from

$519.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Dana Spicer 80
11.25″ ring gear diameter
37 spline pinion
12 ring gear bolts
4.30 ratio

from

$48.99

10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:

Pinion nut for GM 10.5″ 14 bolt truck
15/16″ x 16 thread
1.5″ socket

from

$8.99

14T pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits GM 10.5″ 14 bolt truck

from

$16.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$196.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Spindle bearing and seal kit
Includes all components required to complete the repair
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

Product Features:

Pinion nut washer
Fits Dana Spicer 80

from

$57.99

Pilot bearing for 10.5″ 14 bolt truck, 2.050″ O.D.

Product Features:

Pilot bearing
Fits GM 10.5″ 14 bolt truck
2.050″ O.D.

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM807010 race
All steel construction

from

$12.99

10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.

Product Features:

Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
0.920″ tall

from

$16.99

Differential Pinion

from

$319.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$27.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.30

Differential Drain P

from

$315.99

Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits GM 10.5″ 14 bolt truck open differential
Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$311.99

Yukon replacement standard open spider gear kit for Dana 80 with 37 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 80 open differential with 37 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

Popular 1995 Chevrolet C3500HD Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 1995 Chevrolet C3500HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 177 different Differentials in our inventory ranging from $4.99 to $2,324.99. That means you can find the exact parts or products you need to keep that 1995 Chevrolet C3500HD running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1995 Chevrolet C3500HD. Driveworks, FELPRO, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1995 Chevrolet C3500HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 177 reviews in this category, some of the top rated parts include Bearings with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1995 Chevrolet C3500HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1995 Chevrolet C3500HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1995 Chevrolet C3500HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1995 Chevrolet C3500HD, our most popular Felpro Differentials include:

from $15.99

(1)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $6.79

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

Top 1995 Chevrolet C3500HD Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1995 Chevrolet C3500HD. Popular Driveworks parts include:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $13.79

(4)

Taper Bearing Set

Differential Bearings

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

Differential Bearings

FAQs for 1995 Chevrolet C3500HD Differentials

What are the most purchased Differentials for the 1995 Chevrolet C3500HD?

Out of 177 Differentials for the 1995 Chevrolet C3500HD, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $23.99

(7)

Bearings

Front Differential Pinion Bearings

from $36.99

(15)

Rear Differential Cover

Differential Covers

What are the top-rated 1995 Chevrolet C3500HD Differentials?

Top-rated Differentials for your 1995 Chevrolet C3500HD based on customer reviews/ratings are:

from $22.99

(3)

Bearings

“works great !!!”

1995 Chevrolet C3500HD Differentials

More 1995 Chevrolet C3500HD Differentials

Essential 1995 Chevrolet C3500HD Differentials

USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

Yukon Gear – Differential (Part No.26044)

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – Differential (Part No.26045)

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Yukon Gear – Differential Cover B (Part No.33572)

SKF – Wheel Bearing (Part No.K8000205983SKF)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Pro-King – Rear Axle Shaft Kit (Part No.AXK-185)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 4.30 Ratio (Part No.24081)

Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-387-AS)

National – Wheel Bearing and Seal Kit (Part No.RA-325-A)

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Yukon Gear – Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D. (Part No.18041)

Yukon Gear – Bearing Race Driver (Part No.56013)

Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)

Yukon Gear – Differential Pinion (Part No.55076)

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)

National – Bearings (Part No.HM903210)

MTC – Differential Drain P (Part No.J70581460602MTC)

Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 80 With 37 Spline Axles (Part No.16096)

Popular 1995 Chevrolet C3500HD Differentials Categories